DECLARE_GLOBAL_DATA_PTR;
#endif
-#ifdef CFG_INIT_DCACHE_CS
-# if (CFG_INIT_DCACHE_CS == 0)
-# define PBxAP pb0ap
-# define PBxCR pb0cr
-# if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
-# define PBxAP_VAL CFG_EBC_PB0AP
-# define PBxCR_VAL CFG_EBC_PB0CR
-# endif
-# endif
-# if (CFG_INIT_DCACHE_CS == 1)
-# define PBxAP pb1ap
-# define PBxCR pb1cr
-# if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR))
-# define PBxAP_VAL CFG_EBC_PB1AP
-# define PBxCR_VAL CFG_EBC_PB1CR
-# endif
-# endif
-# if (CFG_INIT_DCACHE_CS == 2)
-# define PBxAP pb2ap
-# define PBxCR pb2cr
-# if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR))
-# define PBxAP_VAL CFG_EBC_PB2AP
-# define PBxCR_VAL CFG_EBC_PB2CR
-# endif
-# endif
-# if (CFG_INIT_DCACHE_CS == 3)
-# define PBxAP pb3ap
-# define PBxCR pb3cr
-# if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR))
-# define PBxAP_VAL CFG_EBC_PB3AP
-# define PBxCR_VAL CFG_EBC_PB3CR
-# endif
-# endif
-# if (CFG_INIT_DCACHE_CS == 4)
-# define PBxAP pb4ap
-# define PBxCR pb4cr
-# if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR))
-# define PBxAP_VAL CFG_EBC_PB4AP
-# define PBxCR_VAL CFG_EBC_PB4CR
-# endif
-# endif
-# if (CFG_INIT_DCACHE_CS == 5)
-# define PBxAP pb5ap
-# define PBxCR pb5cr
-# if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR))
-# define PBxAP_VAL CFG_EBC_PB5AP
-# define PBxCR_VAL CFG_EBC_PB5CR
-# endif
-# endif
-# if (CFG_INIT_DCACHE_CS == 6)
-# define PBxAP pb6ap
-# define PBxCR pb6cr
-# if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR))
-# define PBxAP_VAL CFG_EBC_PB6AP
-# define PBxCR_VAL CFG_EBC_PB6CR
-# endif
-# endif
-# if (CFG_INIT_DCACHE_CS == 7)
-# define PBxAP pb7ap
-# define PBxCR pb7cr
-# if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR))
-# define PBxAP_VAL CFG_EBC_PB7AP
-# define PBxCR_VAL CFG_EBC_PB7CR
-# endif
-# endif
-#endif /* CFG_INIT_DCACHE_CS */
+#ifndef CONFIG_SYS_PLL_RECONFIG
+#define CONFIG_SYS_PLL_RECONFIG 0
+#endif
+
+void reconfigure_pll(u32 new_cpu_freq)
+{
+#if defined(CONFIG_440EPX)
+ int reset_needed = 0;
+ u32 reg, temp;
+ u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */
+ fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */
+ fbdv, target_fbdv, lfbdv, target_lfbdv,
+ perdv0, target_perdv0, /* CLK_PERD */
+ spcid0, target_spcid0; /* CLK_SPCID */
+
+ /* Reconfigure clocks if necessary.
+ * See PPC440EPx User's Manual, sections 8.2 and 14 */
+ if (new_cpu_freq == 667) {
+ target_prbdv0 = 2;
+ target_fwdva = 2;
+ target_fwdvb = 4;
+ target_fbdv = 20;
+ target_lfbdv = 1;
+ target_perdv0 = 4;
+ target_spcid0 = 4;
+
+ mfcpr(CPR0_PRIMBD, reg);
+ temp = (reg & PRBDV_MASK) >> 24;
+ prbdv0 = temp ? temp : 8;
+ if (prbdv0 != target_prbdv0) {
+ reg &= ~PRBDV_MASK;
+ reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24);
+ mtcpr(CPR0_PRIMBD, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(CPR0_PLLD, reg);
+
+ temp = (reg & PLLD_FWDVA_MASK) >> 16;
+ fwdva = temp ? temp : 16;
+
+ temp = (reg & PLLD_FWDVB_MASK) >> 8;
+ fwdvb = temp ? temp : 8;
+
+ temp = (reg & PLLD_FBDV_MASK) >> 24;
+ fbdv = temp ? temp : 32;
+
+ temp = (reg & PLLD_LFBDV_MASK);
+ lfbdv = temp ? temp : 64;
+
+ if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) {
+ reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
+ PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
+ reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) |
+ ((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) |
+ ((target_fbdv == 32 ? 0 : target_fbdv) << 24) |
+ (target_lfbdv == 64 ? 0 : target_lfbdv);
+ mtcpr(CPR0_PLLD, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(CPR0_PERD, reg);
+ perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24;
+ if (perdv0 != target_perdv0) {
+ reg &= ~CPR0_PERD_PERDV0_MASK;
+ reg |= (target_perdv0 << 24);
+ mtcpr(CPR0_PERD, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(CPR0_SPCID, reg);
+ temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24;
+ spcid0 = temp ? temp : 4;
+ if (spcid0 != target_spcid0) {
+ reg &= ~CPR0_SPCID_SPCIDV0_MASK;
+ reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24);
+ mtcpr(CPR0_SPCID, reg);
+ reset_needed = 1;
+ }
+
+ /* Set reload inhibit so configuration will persist across
+ * processor resets */
+ mfcpr(CPR0_ICFG, reg);
+ reg &= ~CPR0_ICFG_RLI_MASK;
+ reg |= 1 << 31;
+ mtcpr(CPR0_ICFG, reg);
+ }
+
+ /* Reset processor if configuration changed */
+ if (reset_needed) {
+ __asm__ __volatile__ ("sync; isync");
+ mtspr(SPRN_DBCR0, 0x20000000);
+ }
+#endif
+}
/*
* Breath some life into the CPU...
*
- * Set up the memory map,
+ * Reconfigure PLL if necessary,
+ * set up the memory map,
* initialize a bunch of registers
*/
void
cpu_init_f (void)
{
-#if defined(CONFIG_WATCHDOG)
- unsigned long val;
+#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX)
+ u32 val;
#endif
-#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CFG_4xx_GPIO_TABLE)
+ reconfigure_pll(CONFIG_SYS_PLL_RECONFIG);
+
+#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
/*
* GPIO0 setup (select GPIO or alternate function)
*/
-#if defined(CFG_GPIO0_OR)
- out32(GPIO0_OR, CFG_GPIO0_OR); /* set initial state of output pins */
+#if defined(CONFIG_SYS_GPIO0_OR)
+ out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR); /* set initial state of output pins */
#endif
-#if defined(CFG_GPIO0_ODR)
- out32(GPIO0_ODR, CFG_GPIO0_ODR); /* open-drain select */
+#if defined(CONFIG_SYS_GPIO0_ODR)
+ out32(GPIO0_ODR, CONFIG_SYS_GPIO0_ODR); /* open-drain select */
#endif
- out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */
- out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
- out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */
- out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
- out32(GPIO0_TSRH, CFG_GPIO0_TSRH); /* three-state select */
- out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
-#if defined(CFG_GPIO0_ISR2H)
- out32(GPIO0_ISR2H, CFG_GPIO0_ISR2H);
- out32(GPIO0_ISR2L, CFG_GPIO0_ISR2L);
+ out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH); /* output select */
+ out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
+ out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H); /* input select */
+ out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
+ out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH); /* three-state select */
+ out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
+#if defined(CONFIG_SYS_GPIO0_ISR2H)
+ out32(GPIO0_ISR2H, CONFIG_SYS_GPIO0_ISR2H);
+ out32(GPIO0_ISR2L, CONFIG_SYS_GPIO0_ISR2L);
#endif
-#if defined (CFG_GPIO0_TCR)
- out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */
+#if defined (CONFIG_SYS_GPIO0_TCR)
+ out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); /* enable output driver for outputs */
#endif
+#endif /* CONFIG_405EP ... && !CONFIG_SYS_4xx_GPIO_TABLE */
#if defined (CONFIG_405EP)
/*
* Set EMAC noise filter bits
*/
- mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
-
- /*
- * Enable the internal PCI arbiter
- */
- mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
-#endif /* CONFIG_405EP */
+ mtdcr(CPC0_EPCTL, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
#endif /* CONFIG_405EP */
-#if defined(CFG_4xx_GPIO_TABLE)
+#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
gpio_set_chip_configuration();
-#endif /* CFG_4xx_GPIO_TABLE */
+#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
/*
* External Bus Controller (EBC) Setup
*/
-#if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
+#if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
defined(CONFIG_405EX) || defined(CONFIG_405))
asm volatile("2: bdnz 2b" ::: "ctr", "cr0");
#endif
- mtebc(pb0ap, CFG_EBC_PB0AP);
- mtebc(pb0cr, CFG_EBC_PB0CR);
+ mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP);
+ mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR);
#endif
-#if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR) && !(CFG_INIT_DCACHE_CS == 1))
- mtebc(pb1ap, CFG_EBC_PB1AP);
- mtebc(pb1cr, CFG_EBC_PB1CR);
+#if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 1))
+ mtebc(PB1AP, CONFIG_SYS_EBC_PB1AP);
+ mtebc(PB1CR, CONFIG_SYS_EBC_PB1CR);
#endif
-#if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR) && !(CFG_INIT_DCACHE_CS == 2))
- mtebc(pb2ap, CFG_EBC_PB2AP);
- mtebc(pb2cr, CFG_EBC_PB2CR);
+#if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 2))
+ mtebc(PB2AP, CONFIG_SYS_EBC_PB2AP);
+ mtebc(PB2CR, CONFIG_SYS_EBC_PB2CR);
#endif
-#if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR) && !(CFG_INIT_DCACHE_CS == 3))
- mtebc(pb3ap, CFG_EBC_PB3AP);
- mtebc(pb3cr, CFG_EBC_PB3CR);
+#if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 3))
+ mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP);
+ mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
#endif
-#if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR) && !(CFG_INIT_DCACHE_CS == 4))
- mtebc(pb4ap, CFG_EBC_PB4AP);
- mtebc(pb4cr, CFG_EBC_PB4CR);
+#if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 4))
+ mtebc(PB4AP, CONFIG_SYS_EBC_PB4AP);
+ mtebc(PB4CR, CONFIG_SYS_EBC_PB4CR);
#endif
-#if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR) && !(CFG_INIT_DCACHE_CS == 5))
- mtebc(pb5ap, CFG_EBC_PB5AP);
- mtebc(pb5cr, CFG_EBC_PB5CR);
+#if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 5))
+ mtebc(PB5AP, CONFIG_SYS_EBC_PB5AP);
+ mtebc(PB5CR, CONFIG_SYS_EBC_PB5CR);
#endif
-#if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR) && !(CFG_INIT_DCACHE_CS == 6))
- mtebc(pb6ap, CFG_EBC_PB6AP);
- mtebc(pb6cr, CFG_EBC_PB6CR);
+#if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 6))
+ mtebc(PB6AP, CONFIG_SYS_EBC_PB6AP);
+ mtebc(PB6CR, CONFIG_SYS_EBC_PB6CR);
#endif
-#if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR) && !(CFG_INIT_DCACHE_CS == 7))
- mtebc(pb7ap, CFG_EBC_PB7AP);
- mtebc(pb7cr, CFG_EBC_PB7CR);
+#if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 7))
+ mtebc(PB7AP, CONFIG_SYS_EBC_PB7AP);
+ mtebc(PB7CR, CONFIG_SYS_EBC_PB7CR);
#endif
-#if defined (CFG_EBC_CFG)
- mtebc(EBC0_CFG, CFG_EBC_CFG);
+#if defined (CONFIG_SYS_EBC_CFG)
+ mtebc(EBC0_CFG, CONFIG_SYS_EBC_CFG);
#endif
#if defined(CONFIG_WATCHDOG)
#else
val |= 0xf0000000; /* generate system reset after 2.684 seconds */
#endif
-#if defined(CFG_4xx_RESET_TYPE)
+#if defined(CONFIG_SYS_4xx_RESET_TYPE)
val &= ~0x30000000; /* clear WRC bits */
- val |= CFG_4xx_RESET_TYPE << 28; /* set board specific WRC type */
+ val |= CONFIG_SYS_4xx_RESET_TYPE << 28; /* set board specific WRC type */
#endif
mtspr(tcr, val);
reset_4xx_watchdog();
#endif /* CONFIG_WATCHDOG */
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
- bd_t *bd = gd->bd;
- unsigned long reg;
-#if defined(CONFIG_405GP)
- uint pvr = get_pvr();
-#endif
-#ifdef CFG_INIT_DCACHE_CS
- /*
- * Flush and invalidate dcache, then disable CS for temporary stack.
- * Afterwards, this CS can be used for other purposes
+#if defined(CONFIG_440GX)
+ /* Take the GX out of compatibility mode
+ * Travis Sawyer, 9 Mar 2004
+ * NOTE: 440gx user manual inconsistency here
+ * Compatibility mode and Ethernet Clock select are not
+ * correct in the manual
*/
- dcache_disable(); /* flush and invalidate dcache */
- mtebc(PBxAP, 0);
- mtebc(PBxCR, 0); /* disable CS for temporary stack */
+ mfsdr(SDR0_MFR, val);
+ val &= ~0x10000000;
+ mtsdr(SDR0_MFR,val);
+#endif /* CONFIG_440GX */
-#if (defined(PBxAP_VAL) && defined(PBxCR_VAL))
+#if defined(CONFIG_460EX)
/*
- * Write new value into CS register
+ * Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and
+ * clear SDR0_AHB_CFG[A2P_PROT2] (bit 25) for a new 460EX errata
+ * regarding concurrent use of AHB USB OTG, USB 2.0 host and SATA
*/
- mtebc(PBxAP, PBxAP_VAL);
- mtebc(PBxCR, PBxCR_VAL);
-#endif
-#endif /* CFG_INIT_DCACHE_CS */
+ mfsdr(SDR0_AHB_CFG, val);
+ val |= 0x80;
+ val &= ~0x40;
+ mtsdr(SDR0_AHB_CFG, val);
+ mfsdr(SDR0_USB2HOST_CFG, val);
+ val &= ~0xf00;
+ val |= 0x400;
+ mtsdr(SDR0_USB2HOST_CFG, val);
+#endif /* CONFIG_460EX */
+#if defined(CONFIG_405EX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
/*
- * Write Ethernetaddress into on-chip register
+ * Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
*/
- reg = 0x00000000;
- reg |= bd->bi_enetaddr[0]; /* set high address */
- reg = reg << 8;
- reg |= bd->bi_enetaddr[1];
- out32 (EMAC_IAH, reg);
-
- reg = 0x00000000;
- reg |= bd->bi_enetaddr[2]; /* set low address */
- reg = reg << 8;
- reg |= bd->bi_enetaddr[3];
- reg = reg << 8;
- reg |= bd->bi_enetaddr[4];
- reg = reg << 8;
- reg |= bd->bi_enetaddr[5];
- out32 (EMAC_IAL, reg);
+ mtdcr(PLB0_ACR, (mfdcr(PLB0_ACR) & ~PLB0_ACR_RDP_MASK) |
+ PLB0_ACR_RDP_4DEEP);
+ mtdcr(PLB1_ACR, (mfdcr(PLB1_ACR) & ~PLB1_ACR_RDP_MASK) |
+ PLB1_ACR_RDP_4DEEP);
+#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
+}
+/*
+ * initialize higher level parts of CPU like time base and timers
+ */
+int cpu_init_r (void)
+{
#if defined(CONFIG_405GP)
+ uint pvr = get_pvr();
+
/*
* Set edge conditioning circuitry on PPC405GPr
* for compatibility to existing PPC405GP designs.
*/
if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
- mtdcr(ecr, 0x60606000);
+ mtdcr(CPC0_ECR, 0x60606000);
}
#endif /* defined(CONFIG_405GP) */
-#endif /* defined(CONFIG_405GP) || defined(CONFIG_405EP) */
- return (0);
+
+ return 0;
}
projects / u-boot / blobdiff