/*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
#include <asm/cache.h>
#include <ppc4xx.h>
-#if defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
#include <libfdt.h>
#include <libfdt_env.h>
#include <fdt_support.h>
+#include <asm/4xx_pcie.h>
DECLARE_GLOBAL_DATA_PTR;
+void __ft_board_setup(void *blob, bd_t *bd)
+{
+ int rc;
+ int i;
+ u32 bxcr;
+ u32 ranges[EBC_NUM_BANKS * 4];
+ u32 *p = ranges;
+ char *ebc_path = "/plb/opb/ebc";
+
+ ft_cpu_setup(blob, bd);
+
+ /*
+ * Read 4xx EBC bus bridge registers to get mappings of the
+ * peripheral banks into the OPB/PLB address space
+ */
+ for (i = 0; i < EBC_NUM_BANKS; i++) {
+ mtdcr(EBC0_CFGADDR, EBC_BXCR(i));
+ bxcr = mfdcr(EBC0_CFGDATA);
+
+ if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) {
+ *p++ = i;
+ *p++ = 0;
+ *p++ = bxcr & EBC_BXCR_BAS_MASK;
+ *p++ = EBC_BXCR_BANK_SIZE(bxcr);
+ }
+ }
+
+ /* Some 405 PPC's have EBC as direct PLB child in the dts */
+ if (fdt_path_offset(blob, "/plb/opb/ebc") < 0)
+ strcpy(ebc_path, "/plb/ebc");
+ rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges,
+ (p - ranges) * sizeof(u32), 1);
+ if (rc) {
+ printf("Unable to update property EBC mappings, err=%s\n",
+ fdt_strerror(rc));
+ }
+}
+void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup")));
+
+/*
+ * Fixup all PCIe nodes by setting the device_type property
+ * to "pci-endpoint" instead is "pci" for endpoint ports.
+ * This property will get checked later by the Linux driver
+ * to properly configure the PCIe port in Linux (again).
+ */
+void fdt_pcie_setup(void *blob)
+{
+ const char *compat = "ibm,plb-pciex";
+ const char *prop = "device_type";
+ const char *prop_val = "pci-endpoint";
+ const u32 *port;
+ int no;
+ int rc;
+
+ /* Search first PCIe node */
+ no = fdt_node_offset_by_compatible(blob, -1, compat);
+ while (no != -FDT_ERR_NOTFOUND) {
+ port = fdt_getprop(blob, no, "port", NULL);
+ if (port == NULL) {
+ printf("WARNING: could not find port property\n");
+ } else {
+ if (is_end_point(*port)) {
+ rc = fdt_setprop(blob, no, prop, prop_val,
+ strlen(prop_val) + 1);
+ if (rc < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop, compat, fdt_strerror(rc));
+ }
+ }
+
+ /* Jump to next PCIe node */
+ no = fdt_node_offset_by_compatible(blob, no, compat);
+ }
+}
+
void ft_cpu_setup(void *blob, bd_t *bd)
{
sys_info_t sys_info;
+ int off, ndepth = 0;
get_sys_info(&sys_info);
bd->bi_intfreq, 1);
do_fixup_by_path_u32(blob, "/plb", "clock-frequency", sys_info.freqPLB, 1);
do_fixup_by_path_u32(blob, "/plb/opb", "clock-frequency", sys_info.freqOPB, 1);
- do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency",
- sys_info.freqEBC, 1);
+
+ if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0)
+ do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency",
+ sys_info.freqEBC, 1);
+ else
+ do_fixup_by_path_u32(blob, "/plb/ebc", "clock-frequency",
+ sys_info.freqEBC, 1);
+
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
/*
- * Setup all baudrates for the UARTs
+ * Fixup all UART clocks for CPU internal UARTs
+ * (only these UARTs are definitely clocked by gd->uart_clk)
+ *
+ * These UARTs are direct childs of /plb/opb. This code
+ * does not touch any UARTs that are connected to the ebc.
*/
- do_fixup_by_compat_u32(blob, "ns16550", "clock-frequency", gd->uart_clk, 1);
+ off = fdt_path_offset(blob, "/plb/opb");
+ while ((off = fdt_next_node(blob, off, &ndepth)) >= 0) {
+ /*
+ * process all sub nodes and stop when we are back
+ * at the starting depth
+ */
+ if (ndepth <= 0)
+ break;
+
+ /* only update direct childs */
+ if ((ndepth == 1) &&
+ (fdt_node_check_compatible(blob, off, "ns16550") == 0))
+ fdt_setprop(blob, off,
+ "clock-frequency",
+ (void*)&(gd->uart_clk), 4);
+ }
/*
* Fixup all ethernet nodes
* Note: aliases in the dts are required for this
*/
- fdt_fixup_ethernet(blob, bd);
+ fdt_fixup_ethernet(blob);
+
+ /*
+ * Fixup all available PCIe nodes by setting the device_type property
+ */
+ fdt_pcie_setup(blob);
}
-#endif /* CONFIG_OF_LIBFDT */
+#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */