#include <ppc4xx.h>
#include <asm/processor.h>
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
#define ONE_BILLION 1000000000
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
}
- sysInfo->freqVCOMhz = (1000000 * m) / sysClkPeriodPs;
- sysInfo->freqProcessor = (sysInfo->freqVCOMhz * 1000000) / sysInfo->pllFwdDiv;
- sysInfo->freqPLB = (sysInfo->freqVCOMhz * 1000000) /
- (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
+ sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+ (unsigned long long)sysClkPeriodPs;
+ sysInfo->freqProcessor = sysInfo->freqVCOHz / sysInfo->pllFwdDiv;
+ sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
} else {
/*
* Check pllFwdDiv to see if running in bypass mode where the CPU speed
sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
sysInfo->freqPLB = CONFIG_SYS_CLK_FREQ / sysInfo->pllPlbDiv;
} else {
- sysInfo->freqVCOMhz = ( 1000000 *
- sysInfo->pllFwdDiv *
- sysInfo->pllFbkDiv *
- sysInfo->pllPlbDiv
- ) / sysClkPeriodPs;
- if (sysInfo->freqVCOMhz >= VCO_MIN
- && sysInfo->freqVCOMhz <= VCO_MAX) {
- sysInfo->freqPLB = (ONE_BILLION /
- ((sysClkPeriodPs * 10) /
- sysInfo->pllFbkDiv)) * 10000;
- sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
- } else {
- printf ("\nInvalid VCO frequency calculated : %ld MHz \a\n",
- sysInfo->freqVCOMhz);
- printf ("It must be between %d-%d MHz \a\n",
- VCO_MIN, VCO_MAX);
- printf ("PLL Mode reg : %8.8lx\a\n",
- pllmr);
- hang ();
- }
+ sysInfo->freqVCOHz = ( 1000000000000LL *
+ (unsigned long long)sysInfo->pllFwdDiv *
+ (unsigned long long)sysInfo->pllFbkDiv *
+ (unsigned long long)sysInfo->pllPlbDiv
+ ) / (unsigned long long)sysClkPeriodPs;
+ sysInfo->freqPLB = (ONE_BILLION / ((sysClkPeriodPs * 10) /
+ sysInfo->pllFbkDiv)) * 10000;
+ sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
}
}
}
#elif defined(CONFIG_440)
-#if !defined(CONFIG_440_GX)
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+void get_sys_info (sys_info_t *sysInfo)
+{
+ unsigned long temp;
+ unsigned long reg;
+ unsigned long lfdiv;
+ unsigned long m;
+ unsigned long prbdv0;
+ /*
+ WARNING: ASSUMES the following:
+ ENG=1
+ PRADV0=1
+ PRBDV0=1
+ */
+
+ /* Decode CPR0_PLLD0 for divisors */
+ mfclk(clk_plld, reg);
+ temp = (reg & PLLD_FWDVA_MASK) >> 16;
+ sysInfo->pllFwdDivA = temp ? temp : 16;
+ temp = (reg & PLLD_FWDVB_MASK) >> 8;
+ sysInfo->pllFwdDivB = temp ? temp: 8 ;
+ temp = (reg & PLLD_FBDV_MASK) >> 24;
+ sysInfo->pllFbkDiv = temp ? temp : 32;
+ lfdiv = reg & PLLD_LFBDV_MASK;
+
+ mfclk(clk_opbd, reg);
+ temp = (reg & OPBDDV_MASK) >> 24;
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+
+ mfclk(clk_perd, reg);
+ temp = (reg & PERDV_MASK) >> 24;
+ sysInfo->pllExtBusDiv = temp ? temp : 8;
+
+ mfclk(clk_primbd, reg);
+ temp = (reg & PRBDV_MASK) >> 24;
+ prbdv0 = temp ? temp : 8;
+
+ mfclk(clk_spcid, reg);
+ temp = (reg & SPCID_MASK) >> 24;
+ sysInfo->pllPciDiv = temp ? temp : 4;
+
+ /* Calculate 'M' based on feedback source */
+ mfsdr(sdr_sdstp0, reg);
+ temp = (reg & PLLSYS0_SEL_MASK) >> 27;
+ if (temp == 0) { /* PLL output */
+ /* Figure which pll to use */
+ mfclk(clk_pllc, reg);
+ temp = (reg & PLLC_SRC_MASK) >> 29;
+ if (!temp) /* PLLOUTA */
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
+ else /* PLLOUTB */
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
+ }
+ else if (temp == 1) /* CPU output */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+ else /* PerClk */
+ m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+
+ /* Now calculate the individual clocks */
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqEPB = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
+ sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
+
+ /* Figure which timer source to use */
+ if (mfspr(ccr1) & 0x0080) { /* External Clock, assume same as SYS_CLK */
+ temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */
+ if (CONFIG_SYS_CLK_FREQ > temp)
+ sysInfo->freqTmrClk = temp;
+ else
+ sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
+ }
+ else /* Internal clock */
+ sysInfo->freqTmrClk = sysInfo->freqProcessor;
+}
+/********************************************
+ * get_PCI_freq
+ * return PCI bus freq in Hz
+ *********************************************/
+ulong get_PCI_freq (void)
+{
+ sys_info_t sys_info;
+ get_sys_info (&sys_info);
+ return sys_info.freqPCI;
+}
+
+#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP)
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
- if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
- sysInfo->freqPLB >>= 1;
+ if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
+ sysInfo->freqPLB >>= 1;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
extern void get_sys_info (sys_info_t * sysInfo);
extern ulong get_PCI_freq (void);
+#elif defined(CONFIG_AP1000)
+void get_sys_info (sys_info_t * sysInfo) {
+ sysInfo->freqProcessor = 240 * 1000 * 1000;
+ sysInfo->freqPLB = 80 * 1000 * 1000;
+ sysInfo->freqPCI = 33 * 1000 * 1000;
+}
+
#elif defined(CONFIG_405)
void get_sys_info (sys_info_t * sysInfo) {
/*
* Determine VCO clock frequency
*/
- sysInfo->freqVCOMhz = (1000000 * m) / sysClkPeriodPs;
+ sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+ (unsigned long long)sysClkPeriodPs;
/*
* Determine CPU clock frequency
* Determine PLB clock frequency
*/
sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
-
- if (!((sysInfo->freqVCOMhz >= VCO_MIN) && (sysInfo->freqVCOMhz <= VCO_MAX))) {
- printf ("\nInvalid VCO frequency calculated : %ld MHz \a\n",
- sysInfo->freqVCOMhz);
- printf ("It must be between %d-%d MHz \a\n", VCO_MIN, VCO_MAX);
- printf ("PLL Mode reg 0 : %8.8lx\a\n", pllmr0);
- printf ("PLL Mode reg 1 : %8.8lx\a\n", pllmr1);
- hang ();
- }
}
int get_clocks (void)
{
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405) || defined(CONFIG_405EP)
- DECLARE_GLOBAL_DATA_PTR;
-
sys_info_t sys_info;
get_sys_info (&sys_info);
#endif /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
#ifdef CONFIG_IOP480
- DECLARE_GLOBAL_DATA_PTR;
-
gd->cpu_clk = 66000000;
gd->bus_clk = 66000000;
#endif
projects / u-boot / blobdiff