Flex-OneNAND driver support

[u-boot] / doc / README-integrator

diff --git a/doc/README-integrator b/doc/README-integrator
index c435c8875925b77900adccca7305413126189a2d..4daf3413aa6e92dd4b790a0dbaff750561f9c6f2 100644 (file)
--- a/doc/README-integrator
+++ b/doc/README-integrator
@@ -18,6 +18,7 @@ Each CM consists of a ARM processor core and associated hardware e.g
        SDRAM
        RAM controllers
        clock generators etc.
+CMs may be fitted with varying amounts of SDRAM using a DIMM socket.
 
 Boot Methods :
 ------------
@@ -61,3 +62,49 @@ of the Integrator board itself, has been placed in
 
        board/integrator<>/platform.S
        board/integrator<>/integrator<>.c
+
+Targets
+=======
+The U-Boot make targets map to the available core modules as below.
+
+Integrator/AP is no longer available from ARM.
+Core modules marked ** are also no longer available.
+
+ap720t_config          ** CM720T
+ap920t_config          ** CM920T
+ap926ejs_config        Integrator Core Module for ARM926EJ-STM
+ap946es_config         Integrator Core Module for ARM946E-STM
+cp920t_config          ** CM920T
+cp926ejs_config        Integrator Core Module for ARM926EJ-STM
+cp946es_config         Integrator Core Module for ARM946E-STM
+cp1136_config          Integrator Core Module ARM1136JF-S  TM
+
+The final groups of targets are for core modules where no explicit cpu
+code has yet been added to U-Boot i.e. they all use the same U-Boot binary
+using the generic "arm_intcm" core:
+
+ap966_config                   Integrator Core Module for ARM966E-S TM
+ap922_config                   Integrator Core Module for ARM922T TM with ETM
+ap922_XA10_config              Integrator Core Module for ARM922T using Altera Excalibur
+ap7_config                     ** CM7TDMI
+integratorap_config
+ap_config
+
+
+cp966_config                   Integrator Core Module for ARM966E-S TM
+cp922_config                   Integrator Core Module for ARM922T TM with ETM
+cp922_XA10_config              Integrator Core Module for ARM922T using Altera Excalibur
+cp1026_config                  Integrator Core Module ARM1026EJ-S TM
+integratorcp_config
+cp_config
+
+The Makefile targets call board/integrator<>/split_by_variant.sh
+to configure various defines in include/configs/integrator<>.h
+to indicate the core module & core configuration and ensure that
+board/integrator<>/u-boot.lds loads the cpu object first in the U-Boot image.
+
+*********************************
+Because of this mechanism
+> make clean
+must be run before each change in configuration
+*********************************