SW3.5: on SW3.6: OFF SW3.7: OFF SW3.8: on
-
The followind detailed description of installation and initial steps
with U-Boot and QNX was provided by Jim Sandoz <sandoz@lucent.com>:
http://e-www.motorola.com/collateral/UNITYX4CONFIG.pdf
-
Connection Diagram:
- ===========
+ ===========
=== ===== |----- |
| | <---------------> | | | | |
|PC | rs232 | BDI |=============[] | |
| | |2000 | BDM probe | | |
| | <---------------> | | |----- |
=== ethernet ===== | |
- | |
- ===========
- Sandpoint X3 with
- Unity 8240 proc
+ | |
+ ===========
+ Sandpoint X3 with
+ Unity 8240 proc
PART 1)
hostname=sp1
ethaddr=00:03:47:97:E4:6B
load=tftp 100000 u-boot.bin
-update=protect off all;era FFF00000 FFF3FFFF;cp.b 100000 FFF00000 $(filesize);saveenv
+update=protect off all;era FFF00000 FFF3FFFF;cp.b 100000 FFF00000 ${filesize};saveenv
filesize=1f304
gatewayip=145.17.228.1
netmask=255.255.255.0
You can put these commands into some environment variables;
=> setenv load tftp 100000 u-boot.bin
-=> setenv update protect off all\;era FFF00000 FFF3FFFF\;cp.b 100000 FFF00000 \$(filesize)\;saveenv
+=> setenv update protect off all\;era FFF00000 FFF3FFFF\;cp.b 100000 FFF00000 \${filesize}\;saveenv
=> saveenv
Then you just have to type "run load" then "run update"
Filename 'sandpoint-simple.elf'.
Load address: 0x800000
Loading: #################################################################
- #################################################################
- #################################################################
- ########################
+ #################################################################
+ #################################################################
+ ########################
done
Bytes transferred = 1120284 (11181c hex)
==>
cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login
cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot
-