8xx: add support for new keymile kmsupx4 board.

[u-boot] / doc / README.ebony

diff --git a/doc/README.ebony b/doc/README.ebony
index 12a0d703894d3c95751251d3878121c631dfe556..a395a4996219a372825914206bc4fd8935c8552b 100644 (file)
--- a/doc/README.ebony
+++ b/doc/README.ebony
@@ -1,9 +1,9 @@
-                           IBM Ebony Board
+                          AMCC Ebony Board
 
-                    Last Update: September 12, 2002
+                   Last Update: September 12, 2002
 =======================================================================
 
-This file contains some handy info regarding U-Boot and the IBM
+This file contains some handy info regarding U-Boot and the AMCC
 Ebony evalutation board. See the README.ppc440 for additional
 information.
 
@@ -35,7 +35,7 @@ I2C iprobe
 =====================
 
 The i2c utilities have been tested on both Rev B. and Rev C. and
-look good. The CFG_I2C_NOPROBES macro is defined to prevent
+look good. The CONFIG_SYS_I2C_NOPROBES macro is defined to prevent
 probing the CDCV850 clock controller at address 0x69 (since reading
 it causes the i2c implementation to misbehave. The output of
 iprobe should look like this (assuming you are only using a single
@@ -131,8 +131,6 @@ We never tested anything other than 33 MHz/32-bit cards. If you have
 the chance to do this, please let me know how things turn out :-)
 
 
-
 Regards,
 --Scott
 <smcnutt@artesyncp.com>
-