board: arm: Add support for Broadcom BCM7445

[u-boot] / doc / README.imx6

diff --git a/doc/README.imx6 b/doc/README.imx6
index 437af2fd9ae5eda9f8bdc30458f7117a1e9dc498..b0644f8491f8ebe0f89c5742f77ec7822799aeb1 100644 (file)
--- a/doc/README.imx6
+++ b/doc/README.imx6
@@ -7,7 +7,10 @@ SoC.
 -----------------------------------
 
 1.1 MAC Address: It is stored in fuse bank 4, with the 32 lsbs in word 2 and the
-    16 msbs in word 3.
+    16 msbs in word 3[15:0].
+    For i.MX6SX and i.MX6UL, they have two MAC addresses. The second MAC address
+    is stored in fuse bank 4, with the 16 lsb in word 3[31:16] and the 32 msbs in 
+    word 4.
 
 Example:
 
@@ -34,7 +37,7 @@ As the fuses are arranged in banks of 8 words:
 bank = 4
 word = 2
 
-And the U-boot command would be:
+And the U-Boot command would be:
 
 => fuse read 4 2
 Reading bank 4:
@@ -55,7 +58,7 @@ As the fuses are arranged in banks of 8 words:
 bank = 4
 word = 3
 
-And the U-boot command would be:
+And the U-Boot command would be:
 
 => fuse read 4 3
 Reading bank 4:
@@ -84,3 +87,29 @@ Address:
 Reading bank 4:
 
 Word 0x00000002: 9f027772 00000004
+
+2. Using imx_usb_loader for first install with SPL
+--------------------------------------------------
+
+imx_usb_loader is a very nice tool by Boundary Devices that
+allow to install U-Boot without a JTAG debugger, using
+the USB boot mode as described in the manual. It is
+a replacement for Freescale's MFGTOOLS.
+
+The sources can be found here:
+
+       https://github.com/boundarydevices/imx_usb_loader.git
+
+Booting in USB mode, the i.MX6 announces itself to the Linux Host as:
+
+Bus 001 Device 111: ID 15a2:0061 Freescale Semiconductor, Inc.
+
+imx_usb_loader is able to download a single file (u-boot.imx)
+to the board. For boards without SPL support, it is enough to
+issue the command:
+
+       sudo ../imx_usb_loader/imx_usb -v u-boot.imx
+
+In order to load SPL and u-boot.img via imx_usb_loader tool,
+please refer to doc/README.sdp.
+