MX53: DDR: Fix ZQHWCTRL field TZQ_CS

[u-boot] / doc / README.mpc837xemds

diff --git a/doc/README.mpc837xemds b/doc/README.mpc837xemds
index 78235952eb10eda0d30dd2fdf00de26df4c16288..faf21c9ffb6d13625875b350be25c1d075848ebb 100644 (file)
--- a/doc/README.mpc837xemds
+++ b/doc/README.mpc837xemds
@@ -1,7 +1,7 @@
 Freescale MPC837xEMDS Board
 -----------------------------------------
 1.     Board Switches and Jumpers
-1.0    There are four Dual-In-Line Packages(DIP) Switches on MPC837xEMDS board
+1.0    There are four Dual-In-Line Packages(DIP) Switches on MPC837xEMDS board
        For some reason, the HW designers describe the switch settings
        in terms of 0 and 1, and then map that to physical switches where
        the label "On" refers to logic 0 and "Off" is logic 1.
@@ -14,7 +14,7 @@ Freescale MPC837xEMDS Board
                "Off" == 1
                "On"  == 0
 
-       SW4[8] is the bit labled 8 on Switch 4.
+       SW4[8] is the bit labeled 8 on Switch 4.
        SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2.
        SW2[1:8]= 0000_0001 refers to bits labeled 1 through 7 is set as "On"
                and bits labeled 8 is set as "Off".
@@ -60,8 +60,8 @@ Freescale MPC837xEMDS Board
 
        include/configs/MPC837XEMDS.h
 
-    CONFIG_MPC83XX         MPC83xx family for both MPC837x and MPC8360
-    CONFIG_MPC837X         MPC837x specific
+    CONFIG_MPC83xx         MPC83xx family for both MPC837x and MPC8360
+    CONFIG_MPC837x         MPC837x specific
     CONFIG_MPC837XEMDS     MPC837XEMDS board specific
 
 4. Compilation