arm: arm925t: remove SX1 board

[u-boot] / doc / README.nand

diff --git a/doc/README.nand b/doc/README.nand
index 04a87c99184be6e229cfbe3d5a8d035adfd6894d..c130189587b81a21b1d51aa20cf11112b8eb89b3 100644 (file)
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -94,14 +94,14 @@ Commands:
       of data for one 512-byte page or 2 256-byte pages. There is no check
       for bad blocks.
 
-   nand read.raw addr ofs|partition
-      Read page from `ofs' in NAND flash to `addr'. This reads the raw page,
-      so ECC is avoided and the OOB area is read as well.
-
-   nand write.raw addr ofs|partition
-      Write page from `addr' to `ofs' in NAND flash. This writes the raw page,
-      so ECC is avoided and the OOB area is written as well, making the whole
-      page written as-is.
+   nand read.raw addr ofs|partition [count]
+   nand write.raw addr ofs|partition [count]
+      Read or write one or more pages at "ofs" in NAND flash, from or to
+      "addr" in memory.  This is a raw access, so ECC is avoided and the
+      OOB area is transferred as well.  If count is absent, it is assumed
+      to be one page.  As with .yaffs2 accesses, the data is formatted as
+      a packed sequence of "data, oob, data, oob, ..." -- no alignment of
+      individual pages is maintained.
 
 Configuration Options:
 
@@ -228,6 +228,8 @@ NAND locking command (for chips with active LOCKPRE pin)
   "nand unlock [offset] [size]"
   unlock consecutive area (can be called multiple times for different areas)
 
+  "nand unlock.allexcept [offset] [size]"
+  unlock all except specified consecutive area
 
 I have tested the code with board containing 128MiB NAND large page chips
 and 32MiB small page chips.