Merge branch 'next' of git://git.denx.de/u-boot-video

[u-boot] / doc / README.video

diff --git a/doc/README.video b/doc/README.video
index 4f7a4b5db54b4ade757d09f252ca272cfe4ffb24..e7ae98aa5d31c0c00e956d5591db19c305536d0b 100644 (file)
--- a/doc/README.video
+++ b/doc/README.video
@@ -32,13 +32,13 @@ The driver has been tested with the following configurations:
 Example: video-mode=fslfb:1280x1024-32@60,monitor=dvi
 
 
-U-boot sunxi video controller driver
+U-Boot sunxi video controller driver
 ====================================
 
-U-boot supports hdmi and lcd output on Allwinner sunxi SoCs, lcd output
+U-Boot supports hdmi and lcd output on Allwinner sunxi SoCs, lcd output
 requires the CONFIG_VIDEO_LCD_MODE Kconfig value to be set.
 
-The sunxi u-boot driver supports the following video-mode options:
+The sunxi U-Boot driver supports the following video-mode options:
 
 - monitor=[none|dvi|hdmi|lcd|vga|composite-*] - Select the video output to use
  none:     Disable video output.
@@ -68,6 +68,11 @@ The sunxi u-boot driver supports the following video-mode options:
     overrides the xres, yres and refresh from the video-mode env. variable.
  Defaults to edid=1.
 
+- overscan_x/overscan_y=<int> - Set x/y overscan value
+ This configures a black border on the left and right resp. top and bottom
+ to deal with overscanning displays. Defaults to overscan_x=32 and
+ overscan_y=20 for composite monitors, 0 for other monitors.
+
 For example to always use the hdmi connector, even if no cable is inserted,
 using edid info when available and otherwise initalizing it at 1024x768@60Hz,
 use: "setenv video-mode sunxi:1024x768-24@60,monitor=dvi,hpd=0,edid=1".