<title>Atari specific information for cc65
<author>Shawn Jefferson, <htmlurl
url="mailto:shawnjefferson@24fightingchickens.com"
-name="shawnjefferson@24fightingchickens.com"> and
-Christian Groessler, <htmlurl url="mailto:cpg@aladdin.de" name="cpg@aladdin.de">
+name="shawnjefferson@24fightingchickens.com"> and
+Christian Groessler, <htmlurl url="mailto:chris@groessler.org" name="chris@groessler.org">
<date>03-Jan-2006
<abstract>
Atari target is a machine language program with a standard executable
header (FF FF <2 byte start address> <2 bytes end address>
[program bytes]). These values are calculated in the crt0.s
-file from the __CODE_LOAD__ and __BSS_LOAD__ values, so keep this in
-mind if you create a custom linker config file and start moving
-segments around (see section <ref name="Reserving a memory area inside the program" id="memhole">). You can
-override this behaviour by creating your own crt0.s file and linking
-it into your program. A run vector is added to the end of the file
-($02E0 <run vector>) and is calculated using
-__CODE_LOAD__ in crt0.s.
+file from the __STARTUP_LOAD__ and __ZPSAVE_LOAD__ values, so keep
+this in mind if you create a custom linker config file and start
+moving segments around (see section
+<ref name="Reserving a memory area inside the program" id="memhole">).
+You can override this behaviour by creating your own crt0.s file and
+linking it into your program. A run vector is added to the end of the
+file ($02E0 <run vector>) and is calculated using
+__STARTUP_LOAD__ in crt0.s.
<sect>Memory layout<p>
current memory configuration, which depends on the size of the
installed memory and cartridges present, by inspecting the value in
the MEMTOP ($2E5) variable. Then the initial stack pointer,
-which indicates the upper bound of memory used, is adjusted. The load
-address of $2E00 was chosen to accommodate having a DOS loaded
-and a driver that resides in low memory such as the 850 R: handler.
-You can override this behaviour by creating a custom linker config
-file.
+which indicates the upper bound of memory used, is adjusted. The
+default load address of $2E00 was chosen to accommodate having
+a DOS loaded and a driver that resides in low memory such as the 850
+R: handler. You can override this behaviour by creating a custom
+linker config file or by using the "--start-addr" cl65 command line
+argument or the "--start-addr" or "-S" ld65 command line arguments.
Special locations:
<sect1>Atari specific functions<p>
-The functions listed below are special for the Atari. See the <htmlurl
-url="funcref.html" name="function reference"> for declaration and usage.
+The functions and global variable listed below are special for the Atari.
+See the <htmlurl url="funcref.html" name="function reference"> for declaration and usage.
<itemize>
<item>get_ostype
<item>get_tv
+<item>_dos_type
<item>_gtia_mkcolor
<item>_getcolor
<item>_getdefdev
Many graphics modes require more memory than the text screen which is
in effect when the program starts up. Therefore the programmer has to
tell the program beforehand the memory requirements of the graphics
-modes the program intends to use.
+modes the program intends to use.
This can be done by using the __RESERVED_MEMORY__ linker config
variable. The number specified there describes the number of bytes to
subtract from the top of available memory as seen from the runtime
25|7146@
26|7146@
27|7146@
-28|160@
+28|162@
29|1@
30|3304@
31|7146
Supports up to four standard joysticks connected to the joystick ports of
the Atari.
+ <tag><tt/atarim8.joy/</tag>
+ Supports up to eight standard joysticks connected to a MultiJoy adapter.
+
</descrip><p>
for sectors 1 to 3, regardless of the type of diskette.
+<sect>CONIO implementation<label id="conio"><p>
+
+The console I/O is speed optimized therefore support for XEP80 hardware
+or f80.com software is missing. Of course you may use stdio.h functions.
+
+
<sect>Other hints<p>
+
<sect1>Function keys<p>
-These are defined to be Atari + number key.
+Function keys are mapped to Atari + number key.
+
+
+<sect1>Passing arguments to the program<p>
+
+Command line arguments can be passed to <tt/main()/ when DOS supports it.
+
+<enum>
+<item>Arguments are separated by spaces.
+<item>Leading and trailing spaces around an argument are ignored.
+<item>The first argument passed to <tt/main/ is the program name.
+<item>A maximum number of 16 arguments (including the program name) are
+ supported.
+</enum>
+
+
+<sect1>Interrupts<p>
+
+The runtime for the Atari uses routines marked as <tt/.INTERRUPTOR/ for
+interrupt handlers. Such routines must be written as simple machine language
+subroutines and will be called automatically by the VBI handler code
+when they are linked into a program. See the discussion of the <tt/.CONDES/
+feature in the <htmlurl url="ca65.html" name="assembler manual">.
+
<sect1>Reserving a memory area inside a program<label id="memhole"><p>
The Atari 130XE maps its additional memory into CPU memory in 16K
chunks at address $4000 to $7FFF. One might want to
prevent this memory area from being used by cc65. Other reasons to
-prevent the use of some memory area could be the buffers for display
-lists and screen memory.
+prevent the use of some memory area could be to reserve space for the
+buffers for display lists and screen memory.
<p>
The Atari executable format allows holes inside a program, e.g. one
part loads into $2E00 to $3FFF, going below the reserved
$BC1F.
<p>
Each load chunk of the executable starts with a 4 byte header which
-defines its load address and size.
+defines its load address and size. In the following linker scripts
+these headers are named HEADER and SECHDR (for the MEMORY layout), and
+accordingly NEXEHDR and CHKHDR (for the SEGMENTS layout).
<p>
<sect2>Low code and high data example<p>
Goal: Create an executable with 2 load chunks which doesn't use the
<p>
The main problem is that the EXE header generated by the cc65 runtime
lib is wrong. It defines a single load chunk with the sizes/addresses
-of the LOWCODE, INIT, CODE, RODATA, and DATA segments (the whole user
+of the STARTUP, LOWCODE, INIT, CODE, RODATA, and DATA segments (the whole user
program).
<p>
The contents of the EXE header come from the EXEHDR segment, which is
-defined in crt0.s. This cannot be changed w/o modifying and
+defined in crt0.s. This cannot be changed without modifying and
recompiling the cc65 atari runtime lib. Therefore the original EXE
header must be discarded. It will be replaced by a user created
-one.
+one. The discarding is done by assigning the EXEHDR segment to the
+BANK memory area. The BANK memory area is discarded in the new linker
+script (written to file "").
<p>
The user needs to create a customized linker config file which adds
new memory areas and segments to hold the new EXE header and the
and the second load chunk header.
<p>
<p>
-This is a modified cc65 Atari linker configuration file (split.cfg):
+This is an example of a modified cc65 Atari linker configuration file
+(split.cfg):
<tscreen><verb>
+SYMBOLS {
+ __STACKSIZE__ = $800; # 2K stack
+ __RESERVED_MEMORY__: value = $0000, weak = yes;
+}
+FEATURES {
+ STARTADDRESS: default = $2E00;
+}
MEMORY {
ZP: start = $82, size = $7E, type = rw, define = yes;
HEADER: start = $0000, size = $6, file = %O; # first load chunk
- RAMLO: start = $2E00, size = $1200, file = %O;
+ RAMLO: start = %S, size = $4000 - %S, file = %O;
BANK: start = $4000, size = $4000, file = "";
SECHDR: start = $0000, size = $4, file = %O; # second load chunk
RAM: start = $8000, size = $3C20, file = %O; # $3C20: matches upper bound $BC1F
- TRAILER: start = $0000, size = $0006, file = %O;
}
SEGMENTS {
EXEHDR: load = BANK, type = ro;
NEXEHDR: load = HEADER, type = ro; # first load chunk
+ STARTUP: load = RAMLO, type = ro, define = yes;
LOWCODE: load = RAMLO, type = ro, define = yes, optional = yes;
INIT: load = RAMLO, type = ro, optional = yes;
CODE: load = RAMLO, type = ro, define = yes;
RODATA: load = RAM, type = ro, define = yes;
DATA: load = RAM, type = rw, define = yes;
BSS: load = RAM, type = bss, define = yes;
+ ZPSAVE: load = RAM, type = bss, define = yes;
ZEROPAGE: load = ZP, type = zp;
- AUTOSTRT: load = TRAILER, type = ro; # defines program entry point
+ AUTOSTRT: load = RAM, type = ro; # defines program entry point
}
FEATURES {
CONDES: segment = RODATA,
label = __DESTRUCTOR_TABLE__,
count = __DESTRUCTOR_COUNT__;
}
-SYMBOLS {
- __STACKSIZE__ = $800; # 2K stack
- __RESERVED_MEMORY__: value = $0, weak = yes;
-}
</verb></tscreen>
<p>
memory area isn't written to the output file. This way the contents of
the EXEHDR segment get discarded.
<p>
-The added NEXEHDR segment defines the correct EXE header. It puts only
-the CODE segment into load chunk #1 (RAMLO memory area).
+The newly added NEXEHDR segment defines the correct EXE header. It
+puts the STARTUP, LOWCODE, INIT, and CODE segments, which are the
+segments containing only code, into load chunk #1 (RAMLO memory area).
<p>
The header for the second load chunk comes from the new CHKHDR
-segment. It puts the RODATA and DATA segments into load chunk #2 (RAM
-memory area).
+segment. It puts the RODATA, DATA, BSS, and ZPSAVE segments into load
+chunk #2 (RAM memory area).
<p>
<p>
The contents of the new NEXEHDR and CHKHDR segments come from this
file (split.s):
<tscreen><verb>
- .import __LOWCODE_LOAD__, __BSS_LOAD__, __CODE_SIZE__
- .import __CODE_LOAD__, __DATA_LOAD__, __RODATA_LOAD__
-
- .segment "NEXEHDR"
- .word $FFFF ; EXE file magic number
- ; 1st load chunk
- .word __LOWCODE_LOAD__
- .word __CODE_LOAD__ + __CODE_SIZE__ - 1
-
- .segment "CHKHDR"
- ; 2nd load chunk (contains with AUTOSTRT in fact a 3rd load chunk)
- .word __RODATA_LOAD__
- .word __BSS_LOAD__ - 1
+ .import __CODE_LOAD__, __BSS_LOAD__, __CODE_SIZE__
+ .import __DATA_LOAD__, __RODATA_LOAD__, __STARTUP_LOAD__
+
+ .segment "NEXEHDR"
+ .word $FFFF
+ .word __STARTUP_LOAD__
+ .word __CODE_LOAD__ + __CODE_SIZE__ - 1
+
+ .segment "CHKHDR"
+ .word __RODATA_LOAD__
+ .word __BSS_LOAD__ - 1
</verb></tscreen>
<p>
Compile with
<sect2>Low data and high code example<p>
-Goal: Put RODATA and DATA into low memory and LOWCODE, INIT, CODE, BSS
-into high memory (split2.cfg):
+Goal: Put RODATA and DATA into low memory and STARTUP, LOWCODE, INIT,
+CODE, BSS, ZPSAVE into high memory (split2.cfg):
<tscreen><verb>
+SYMBOLS {
+ __STACKSIZE__ = $800; # 2K stack
+ __RESERVED_MEMORY__: value = $0000, weak = yes;
+}
+FEATURES {
+ STARTADDRESS: default = $2E00;
+}
MEMORY {
ZP: start = $82, size = $7E, type = rw, define = yes;
HEADER: start = $0000, size = $6, file = %O; # first load chunk
- RAMLO: start = $2E00, size = $1200, file = %O;
+ RAMLO: start = %S, size = $4000 - %S, file = %O;
BANK: start = $4000, size = $4000, file = "";
SECHDR: start = $0000, size = $4, file = %O; # second load chunk
RAM: start = $8000, size = $3C20, file = %O; # $3C20: matches upper bound $BC1F
- TRAILER: start = $0000, size = $0006, file = %O;
}
SEGMENTS {
EXEHDR: load = BANK, type = ro; # discarded old EXE header
DATA: load = RAMLO, type = rw, define = yes;
CHKHDR: load = SECHDR, type = ro; # second load chunk
- LOWCODE: load = RAM, type = ro, define = yes, optional = yes;
+ STARTUP: load = RAM, type = ro, define = yes;
INIT: load = RAM, type = ro, optional = yes;
CODE: load = RAM, type = ro, define = yes;
+ ZPSAVE: load = RAM, type = bss, define = yes;
BSS: load = RAM, type = bss, define = yes;
ZEROPAGE: load = ZP, type = zp;
- AUTOSTRT: load = TRAILER, type = ro; # defines program entry point
+ AUTOSTRT: load = RAM, type = ro; # defines program entry point
}
FEATURES {
CONDES: segment = RODATA,
label = __DESTRUCTOR_TABLE__,
count = __DESTRUCTOR_COUNT__;
}
-SYMBOLS {
- __STACKSIZE__ = $800; # 2K stack
- __RESERVED_MEMORY__: value = $0, weak = yes;
-}
</verb></tscreen>
New contents for NEXEHDR and CHKHDR are needed (split2.s):
<tscreen><verb>
- .import __LOWCODE_LOAD__, __BSS_LOAD__, __DATA_SIZE__
- .import __DATA_LOAD__, __RODATA_LOAD__
+ .import __STARTUP_LOAD__, __ZPSAVE_LOAD__, __DATA_SIZE__
+ .import __DATA_LOAD__, __RODATA_LOAD__
- .segment "NEXEHDR"
- .word $FFFF
- .word __RODATA_LOAD__
- .word __DATA_LOAD__ + __DATA_SIZE__ - 1
+ .segment "NEXEHDR"
+ .word $FFFF
+ .word __RODATA_LOAD__
+ .word __DATA_LOAD__ + __DATA_SIZE__ - 1
- .segment "CHKHDR"
- .word __LOWCODE_LOAD__
- .word __BSS_LOAD__ - 1
+ .segment "CHKHDR"
+ .word __STARTUP_LOAD__
+ .word __ZPSAVE_LOAD__ - 1
</verb></tscreen>
Compile with
If you have problems using the library, if you find any bugs, or if you're
doing something interesting with it, I would be glad to hear from you. Feel
free to contact me by email (<htmlurl url="mailto:uz@cc65.org"
-name="uz@cc65.org"> or <htmlurl url="mailto:cpg@aladdin.de"
-name="cpg@aladdin.de">).
+name="uz@cc65.org"> or <htmlurl url="mailto:chris@groessler.org"
+name="chris@groessler.org"> ).