<title>ca65 Users Guide
<author><url url="mailto:uz@cc65.org" name="Ullrich von Bassewitz">,<newline>
<url url="mailto:greg.king5@verizon.net" name="Greg King">
-<date>2016-06-11
<abstract>
ca65 is a powerful macro assembler for the 6502, 65C02, and 65816 CPUs. It is
<tt><ref id=".PSC02" name=".PSC02"></tt> command was given).
<item>all valid 65C02 mnemonics when in 65C02 mode (after the
<tt><ref id=".PC02" name=".PC02"></tt> command was given).
-<item>all valid 65618 mnemonics when in 65816 mode (after the
+<item>all valid 65816 mnemonics when in 65816 mode (after the
<tt><ref id=".P816" name=".P816"></tt> command was given).
+<item>all valid 4510 mnemonics when in 4510 mode (after the
+ <tt><ref id=".P4510" name=".P4510"></tt> command was given).
</itemize>
<sect1>Address sizes of symbols<p>
+The address size of a symbol can be specified with a prefix:
+<itemize>
+<item>z: zeropage addressing (8 bits).
+<item>a: absolute addressing (16 bits).
+<item>f: far addressing (24 bits).
+</itemize>
+
+The zeropage addressing override can be used to ensure the use of optimal
+zeropage instructions, or correct cases where the size isn't yet known
+due to the single-pass assembly model.
+
+The larger addressing overrides can be used to promote a smaller address
+to absolute or far addressing, instead of being automatically fit into
+a smaller addressing type.
<sect1>Memory models<p>
<tscreen><verb>
; Reserve space for the larger of two data blocks
- savearea: .max (.sizeof (foo), .sizeof (bar))
+ savearea: .res .max (.sizeof (foo), .sizeof (bar))
</verb></tscreen>
See: <tt><ref id=".MIN" name=".MIN"></tt>
Example:
<tscreen><verb>
- ; Reserve space for some data, but 256 bytes minimum
- savearea: .min (.sizeof (foo), 256)
+ ; Reserve space for some data, but 256 bytes maximum
+ savearea: .res .min (.sizeof (foo), 256)
</verb></tscreen>
See: <tt><ref id=".MAX" name=".MAX"></tt>
<tag><tt>at_in_identifiers</tt><label id="at_in_identifiers"></tag>
- Accept the at character (`@') as a valid character in identifiers. The
+ Accept the at character ('@') as a valid character in identifiers. The
at character is not allowed to start an identifier, even with this
feature enabled.
<tag><tt>dollar_in_identifiers</tt><label id="dollar_in_identifiers"></tag>
- Accept the dollar sign (`$') as a valid character in identifiers. The
+ Accept the dollar sign ('$') as a valid character in identifiers. The
dollar character is not allowed to start an identifier, even with this
feature enabled.
<tag><tt>dollar_is_pc</tt><label id="dollar_is_pc"></tag>
- The dollar sign may be used as an alias for the star (`*'), which
+ The dollar sign may be used as an alias for the star ('*'), which
gives the value of the current PC in expressions.
Note: Assignment to the pseudo variable is not allowed.
<tag><tt>leading_dot_in_identifiers</tt><label id="leading_dot_in_identifiers"></tag>
- Accept the dot (`.') as the first character of an identifier. This may be
+ Accept the dot ('.') as the first character of an identifier. This may be
used for example to create macro names that start with a dot emulating
control directives of other assemblers. Note however, that none of the
reserved keywords built into the assembler, that starts with a dot, may be
<tag><tt>pc_assignment</tt><label id="pc_assignment"></tag>
- Allow assignments to the PC symbol (`*' or `$' if <tt/dollar_is_pc/
+ Allow assignments to the PC symbol ('*' or '$' if <tt/dollar_is_pc/
is enabled). Such an assignment is handled identical to the <tt><ref
id=".ORG" name=".ORG"></tt> command (which is usually not needed, so just
removing the lines with the assignments may also be an option when porting
code written for older assemblers).
+ <tag><tt>string_escapes</tt><label id="string_escapes"></tag>
+
+ Allow C-style backslash escapes within string constants to embed
+ special characters. The following escapes are accepted:
+ <itemize>
+ <item><tt>\\</tt> backslash (<tt>$5C</tt>)
+ <item><tt>\'</tt> single quote (<tt>$27</tt>)
+ <item><tt>\"</tt> double quote (<tt>$22</tt>)
+ <item><tt>\t</tt> tab (<tt>$09</tt>)
+ <item><tt>\r</tt> carriage return (<tt>$0D</tt>)
+ <item><tt>\n</tt> newline (<tt>$0A</tt>)
+ <item><tt>\xNN</tt> (<tt>$NN</tt>)
+ </itemize>
+
+ Note that string escapes are converted to platform-specific characters in
+ the same way that other characters are converted.
+
<tag><tt>ubiquitous_idents</tt><label id="ubiquitous_idents"></tag>
Allow the use of instructions names as names for macros and symbols. This
Conditional assembly: Check if there are any remaining tokens in this line,
and evaluate to FALSE if this is the case, and to TRUE otherwise. If the
condition is not true, further lines are not assembled until an <tt><ref
- id=".ELSE" name=".ESLE"></tt>, <tt><ref id=".ELSEIF" name=".ELSEIF"></tt> or
+ id=".ELSE" name=".ELSE"></tt>, <tt><ref id=".ELSEIF" name=".ELSEIF"></tt> or
<tt><ref id=".ENDIF" name=".ENDIF"></tt> directive.
This command is often used to check if a macro parameter was given. Since an
(see <tt><ref id=".P02" name=".P02"></tt> command).
+<sect1><tt>.IFP4510</tt><label id=".IFP4510"><p>
+
+ Conditional assembly: Check if the assembler is currently in 4510 mode
+ (see <tt><ref id=".P4510" name=".P4510"></tt> command).
+
+
<sect1><tt>.IFP816</tt><label id=".IFP816"><p>
Conditional assembly: Check if the assembler is currently in 65816 mode
<tt><ref id="option--cpu" name="--cpu"></tt> command line option.
See: <tt><ref id=".PC02" name=".PC02"></tt>, <tt><ref id=".PSC02"
- name=".PSC02"></tt> and <tt><ref id=".P816" name=".P816"></tt>
+ name=".PSC02"></tt>, <tt><ref id=".P816" name=".P816"></tt> and
+ <tt><ref id=".P4510" name=".P4510"></tt>
+
+
+<sect1><tt>.P4510</tt><label id=".P4510"><p>
+
+ Enable the 4510 instruction set. This is a superset of the 65C02 and
+ 6502 instruction sets.
+
+ See: <tt><ref id=".P02" name=".P02"></tt>, <tt><ref id=".PSC02"
+ name=".PSC02"></tt>, <tt><ref id=".PC02" name=".PC02"></tt> and
+ <tt><ref id=".P816" name=".P816"></tt>
<sect1><tt>.P816</tt><label id=".P816"><p>
6502 instruction sets.
See: <tt><ref id=".P02" name=".P02"></tt>, <tt><ref id=".PSC02"
- name=".PSC02"></tt> and <tt><ref id=".PC02" name=".PC02"></tt>
+ name=".PSC02"></tt>, <tt><ref id=".PC02" name=".PC02"></tt> and
+ <tt><ref id=".P4510" name=".P4510"></tt>
<sect1><tt>.PAGELEN, .PAGELENGTH</tt><label id=".PAGELENGTH"><p>
6502 and 65SC02 instructions.
See: <tt><ref id=".P02" name=".P02"></tt>, <tt><ref id=".PSC02"
- name=".PSC02"></tt> and <tt><ref id=".P816" name=".P816"></tt>
+ name=".PSC02"></tt>, <tt><ref id=".P816" name=".P816"></tt> and
+ <tt><ref id=".P4510" name=".P4510"></tt>
<sect1><tt>.POPCPU</tt><label id=".POPCPU"><p>
6502 instructions.
See: <tt><ref id=".P02" name=".P02"></tt>, <tt><ref id=".PC02"
- name=".PC02"></tt> and <tt><ref id=".P816" name=".P816"></tt>
+ name=".PC02"></tt>, <tt><ref id=".P816" name=".P816"></tt> and
+ <tt><ref id=".P4510" name=".P4510"></tt>
<sect1><tt>.PUSHCPU</tt><label id=".PUSHCPU"><p>
page and direct (short) addressing is possible for data in this segment.
Beware: Only labels in a segment with the zeropage attribute are marked
- as reachable by short addressing. The `*' (PC counter) operator will
+ as reachable by short addressing. The '*' (PC counter) operator will
work as in other segments and will create absolute variable values.
Please note that a segment cannot have two different address sizes. A
Switch the CPU instruction set. The command is followed by a string that
specifies the CPU. Possible values are those that can also be supplied to
the <tt><ref id="option--cpu" name="--cpu"></tt> command line option,
- namely: 6502, 6502X, 65SC02, 65C02, 65816 and HuC6280.
+ namely: 6502, 6502X, 65SC02, 65C02, 65816, 4510 and HuC6280.
See: <tt><ref id=".CPU" name=".CPU"></tt>,
<tt><ref id=".IFP02" name=".IFP02"></tt>,
<tt><ref id=".IFPSC02" name=".IFPSC02"></tt>,
<tt><ref id=".P02" name=".P02"></tt>,
<tt><ref id=".P816" name=".P816"></tt>,
+ <tt><ref id=".P4510" name=".P4510"></tt>,
<tt><ref id=".PC02" name=".PC02"></tt>,
<tt><ref id=".PSC02" name=".PSC02"></tt>
CPU_65816
CPU_SWEET16
CPU_HUC6280
+ CPU_4510
</verb></tscreen>
is defined. These constants may be used to determine the exact type of the
CPU_ISET_65816
CPU_ISET_SWEET16
CPU_ISET_HUC6280
+ CPU_ISET_4510
</verb></tscreen>
The value read from the <tt/<ref id=".CPU" name=".CPU">/ pseudo variable may
<itemize>
<item><tt/__APPLE2__/ - Target system is <tt/apple2/ or <tt/apple2enh/
<item><tt/__APPLE2ENH__/ - Target system is <tt/apple2enh/
+<item><tt/__ATARI2600__/ - Target system is <tt/atari2600/
<item><tt/__ATARI5200__/ - Target system is <tt/atari5200/
<item><tt/__ATARI__/ - Target system is <tt/atari/ or <tt/atarixl/
<item><tt/__ATARIXL__/ - Target system is <tt/atarixl/
projects / cc65 / blobdiff