-
<!doctype linuxdoc system>
<article>
<descrip>
+ <label id="option--cpu">
<tag><tt>--cpu type</tt></tag>
Set the default for the CPU type. The option takes a parameter, which
may be one of
- 6502, 65C02, 65816 and sunplus
+ 6502, 65SC02, 65C02, 65816 and sunplus
- The latter (sunplus) is not available in the freeware version, because the
- instruction set of the sunplus CPU is "confidential".
+ The last one (sunplus) is not available in the freeware version, because the
+ instruction set of the sunplus CPU is "proprietary and confidential".
<label id="option--feature">
<sect>Input format<p>
+<sect1>Assembler syntax<p>
+
The assembler accepts the standard 6502/65816 assembler syntax. One line may
contain a label (which is identified by a colon), and, in addition to the
label, an assembler mnemonic, a macro, or a control command (see section <ref
MaSym = Label ; Another symbol
</verb></tscreen>
-The assembler accepts all valid 6502 mnemonics when in 6502 mode (the
-default). The assembler accepts all valid 65SC02 mnemonics when in 65SC02 mode
-(after a <tt><ref id=".PC02" name=".PC02"></tt> command is found). The
-assembler accepts all valid 65816 mnemonics with a few exceptions after a
-.P816 command is found. These exceptions are listed below.
+The assembler accepts
+
+<itemize>
+<item>all valid 6502 mnemonics when in 6502 mode (the default or after the
+ <tt><ref id=".P02" name=".P02"></tt> command was given).
+<item>all valid 65SC02 mnemonics when in 65SC02 mode (after the
+ <tt><ref id=".PSC02" name=".PSC02"></tt> command was given).
+<item>all valid 65C02 mnemonics when in 65C02 mode (after the
+ <tt><ref id=".PC02" name=".PC02"></tt> command was given).
+<item>all valid 65618 mnemonics when in 65816 mode (after the
+ <tt><ref id=".P816" name=".P816"></tt> command was given).
+<item>all valid SunPlus mnemonics when in SunPlus mode (after the
+ <tt><ref id=".SUNPLUS" name=".SUNPLUS"></tt> command was given).
+</itemize>
+
+
+<sect1>65816 mode<p>
In 65816 mode several aliases are accepted in addition to the official
mnemonics:
jsl 3.$1234 ; Call subroutine at $1234 in bank 3
</verb></tscreen>
+<sect1>Number format<p>
+
For literal values, the assembler accepts the widely used number formats:
A preceeding '$' denotes a hex value, a preceeding '%' denotes a
binary value, and a bare number is interpeted as a decimal. There are
currently no octal values and no floats.
-<p>
+
+
+<sect1>Conditional assembly<p>
+
+Please note that when using the conditional directives (<tt/.IF/ and friends),
+the input must consist of valid assembler tokens, even in <tt/.IF/ branches
+that are not assembled. The reason for this behaviour is that the assembler
+must still be able to detect the ending tokens (like <tt/.ENDIF/), so
+conversion of the input stream into tokens still takes place. As a consequence
+conditional assembly directives may <bf/not/ be used to prevent normal text
+(used as a comment or similar) from being assembled. <p>
<sect>Expressions<p>
linker.
-<sect1>Size of an expression
s result<p>
+<sect1>Size of an expression result<p>
Sometimes, the assembler must know about the size of the value that is the
result of an expression. This is usually the case, if a decision has to be
<item> If the result of an expression is constant, the actual value is
checked to see if it's a byte sized expression or not.
<item> If the expression is explicitly casted to a byte sized expression by
- one of the '>'/'<' operators, it is a byte expression.
+ one of the '>', '<' or '^' operators, it is a byte expression.
<item> If this is not the case, and the expression contains a symbol,
explicitly declared as zero page symbol (by one of the .importzp or
.exportzp instructions), then the whole expression is assumed to be
not evaluated.
-<sect1>Available operators<p>
+<sect1>Constant expressions<p>
+
+Sometimes an expression must evaluate to a constant without looking at any
+further input. One such example is the <tt/<ref id=".IF" name=".IF">/ command
+that decides if parts of the code are assembled or not. An expression used in
+the <tt/.IF/ command cannot reference a symbol defined later, because the
+decision about the <tt/.IF/ must be made at the point when it is read. If the
+expression used in such a context contains only constant numerical values,
+there is no problem. When unresolvable symbols are involved it may get harder
+for the assembler to determine if the expression is actually constant, and it
+is even possible to create expressions that aren't recognized as constant.
+Simplifying the expressions will often help.
+
+In cases where the result of the expression is not needed immediately, the
+assembler will delay evaluation until all input is read, at which point all
+symbols are known. So using arbitrary complex constant expressions is no
+problem in most cases.
+
+
+
+<sect1>Available operators<label id="operators"><p>
Available operators sorted by precedence:
.MATCH Builtin function 1
.TCOUNT Builtin function 1
.TIME Builtin function 1
+ .VERSION Builtin function 1
.XMATCH Builtin function 1
.PARAMCOUNT Builtin pseudo variable (r/o) 1
.REFERENCED Builtin function 1
- :: Global namespace override 1
+ Unary plus 1
- Unary minus 1
~ Unary bitwise not 1
.BITNOT Unary bitwise not 1
< Low byte operator 1
> High byte operator 1
+ ^ Bank byte operator 1
* Multiplication 2
/ Division 2
.BITAND Bitwise and 2
^ Bitwise xor 2
.BITXOR Bitwise xor 2
- << Shift left operator 2
+ << Shift left operator 2
.SHL Shift left operator 2
>> Shift right operator
.SHR Shift right operator 2
* This symbol is replaced by the value of the program
counter at start of the current instruction. Note, that
'*' yields a rvalue, that means, you cannot assign to it.
- Use <tt/.ORG/ to set the program counter in sections with
+ Use .ORG to set the program counter in sections with
absolute code.
</verb></tscreen>
<p>
<sect1>Numeric constants<p>
-Numeric constants are defined using the equal sign. After doing
+Numeric constants are defined using the equal sign or the label assignment
+operator. After doing
<tscreen><verb>
two = 2
</verb></tscreen>
may use the symbol "two" in every place where a number is expected, and it is
-evaluated to the value 2 in this context. An example would be
+evaluated to the value 2 in this context. The label assignment operator causes
+the same, but causes the symbol to be marked as a label, which may cause a
+different handling in the debugger:
+
+<tscreen><verb>
+ io := $d000
+</verb></tscreen>
+
+The right side can of course be an expression:
<tscreen><verb>
four = two * two
dey
bne @Loop ; Ok
rts
- Sub: ... ; New global label
- bne @Loop ; ERROR: Unknown identifier!
+ Sub: ... ; New global label
+ bne @Loop ; ERROR: Unknown identifier!
</verb></tscreen>
<sect1>Unnamed labels<p>
+<sect>Scopes<label id="scopes"><p>
+
+ca65 implements several sorts of scopes for symbols.
+
+<sect1>Global scope<p>
+
+All (non cheap local) symbols that are declared outside of any nested scopes
+are in global scope.
+
+
+<sect1>A special scope: cheap locals<p>
+
+A special scope is the scope for cheap local symbols. It lasts from one non
+local symbol to the next one, without any provisions made by the programmer.
+All other scopes differ in usage but use the same concept internally.
+
+
+<sect1>Generic nested scopes<p>
+
+A nested scoped for generic use is started with <tt/<ref id=".SCOPE"
+name=".SCOPE">/ and closed with <tt/<ref id=".ENDSCOPE" name=".ENDSCOPE">/.
+The scope can have a name, in which case it is accessible from the outside by
+using <ref id="scopesyntax" name="explicit scopes">. If the scope does not
+have a name, all symbols created within the scope are local to the scope, and
+aren't accessible from the outside.
+
+A nested scope can access symbols from the local or from enclosing scopes by
+name without using explicit scope names. In some cases there may be
+ambiguities, for example if there is a reference to a local symbol that is not
+yet defined, but a symbol with the same name exists in outer scopes:
+
+<tscreen><verb>
+ .scope outer
+ foo = 2
+ .scope inner
+ lda #foo
+ foo = 3
+ .endscope
+ .endscope
+</verb></tscreen>
+
+In the example above, the <tt/lda/ instruction will load the value 3 into the
+accumulator, because <tt/foo/ is redefined in the scope. However:
+
+<tscreen><verb>
+ .scope outer
+ foo = $1234
+ .scope inner
+ lda foo,x
+ foo = $12
+ .endscope
+ .endscope
+</verb></tscreen>
+
+Here, <tt/lda/ will still load from <tt/$12,x/, but since it is unknown to the
+assembler that <tt/foo/ is a zeropage symbol when translating the instruction,
+absolute mode is used instead. In fact, the assembler will not use absolute
+mode by default, but it will search through the enclosing scopes for a symbol
+with the given name. If one is found, the address size of this symbol is used.
+This may lead to errors:
+
+<tscreen><verb>
+ .scope outer
+ foo = $12
+ .scope inner
+ lda foo,x
+ foo = $1234
+ .endscope
+ .endscope
+</verb></tscreen>
+
+In this case, when the assembler sees the symbol <tt/foo/ in the <tt/lda/
+instruction, it will search for an already defined symbol <tt/foo/. It will
+find <tt/foo/ in scope <tt/outer/, and a close look reveals that it is a
+zeropage symbol. So the assembler will use zeropage addressing mode. If
+<tt/foo/ is redefined later in scope <tt/inner/, the assembler tries to change
+the address in the <tt/lda/ instruction already translated, but since the new
+value needs absolute addressing mode, this fails, and an error message "Range
+error" is output.
+
+Of course the most simple solution for the problem is to move the definition
+of <tt/foo/ in scope <tt/inner/ upwards, so it preceeds its use. There may be
+rare cases when this cannot be done. In these cases, you can use one of the
+address size override operators:
+
+<tscreen><verb>
+ .scope outer
+ foo = $12
+ .scope inner
+ lda a:foo,x
+ foo = $1234
+ .endscope
+ .endscope
+</verb></tscreen>
+
+This will cause the <tt/lda/ instruction to be translated using absolute
+addressing mode, which means changing the symbol reference later does not
+cause any errors.
+
+
+<sect1>Nested procedures<p>
+
+A nested procedure is created by use of <tt/<ref id=".PROC" name=".PROC">/. It
+differs from a <tt/<ref id=".SCOPE" name=".SCOPE">/ in that it must have a
+name, and a it will introduce a symbol with this name in the enclosing scope.
+So
+
+<tscreen><verb>
+ .proc foo
+ ...
+ .endscope
+</verb></tscreen>
+
+is actually the same as
+
+<tscreen><verb>
+ foo:
+ .scope foo
+ ...
+ .endscope
+</verb></tscreen>
+
+This is the reason why a procedure must have a name. If you want a scope
+without a name, use <tt/<ref id=".SCOPE" name=".SCOPE">/.
+
+<bf/Note:/ As you can see from the example above, scopes and symbols live in
+different namespaces. There can be a symbol named <tt/foo/ and a scope named
+<tt/foo/ without any conflicts (but see the section titled <ref
+id="scopesearch" name=""Scope search order"">).
+
+
+<sect1>Structs, unions and enums<p>
+
+Structs, unions and enums are explained in a <ref id="structs" name="separate
+section">, I do only cover them here, because if they are declared with a
+name, they open a nested scope, similar to <tt/<ref id=".SCOPE"
+name=".SCOPE">/. However, when no name is specified, the behaviour is
+different: In this case, no new scope will be opened, symbols declared within
+a struct, union, or enum declaration will then be added to the enclosing scope
+instead.
+
+
+<sect1>Explicit scope specification<label id="scopesyntax"><p>
+
+Accessing symbols from other scopes is possible by using an explicit scope
+specification, provided that the scope where the symbol lives in has a name.
+The namespace token (<tt/::/) is used to access other scopes:
+
+<tscreen><verb>
+ .scope foo
+ bar: .word 0
+ .endscope
+
+ ...
+ lda foo::bar ; Access foo in scope bar
+</verb></tscreen>
+
+The only way to deny access to a scope from the outside is to declare a scope
+without a name (using the <tt/<ref id=".SCOPE" name=".SCOPE">/ command).
+
+A special syntax is used to specify the global scope: If a symbol or scope is
+preceeded by the namespace token, the global scope is searched:
+
+<tscreen><verb>
+ bar = 3
+
+ .scope foo
+ bar = 2
+ lda #::bar ; Access the global bar (which is 3)
+ .endscope
+</verb></tscreen>
+
+
+<sect1>Scope search order<label id="scopesearch"><p>
+
+The assembler searches for a scope in a similar way as for a symbol. First, it
+looks in the current scope, and then it walks up the enclosing scopes until
+the scope is found.
+
+However, one important thing to note when using explicit scope syntax is, that
+a symbol may be accessed before it is defined, but a scope may <bf/not/ be
+used without a preceeding definition. This means that in the following
+example:
+
+<tscreen><verb>
+ .scope foo
+ bar = 3
+ .endscope
+
+ .scope outer
+ lda #foo::bar ; Will load 3, not 2!
+ .scope foo
+ bar = 2
+ .endscope
+ .endscope
+</verb></tscreen>
+
+the reference to the scope <tt/foo/ will use the global scope, and not the
+local one, because the local one is not visible at the point where it is
+referenced.
+
+Things get more complex if a complete chain of scopes is specified:
+
+<tscreen><verb>
+ .scope foo
+ .scope outer
+ .scope inner
+ bar = 1
+ .endscope
+ .endscope
+ .scope another
+ .scope nested
+ lda #outer::inner::bar ; 1
+ .endscope
+ .endscope
+ .endscope
+
+ .scope outer
+ .scope inner
+ bar = 2
+ .endscope
+ .endscope
+</verb></tscreen>
+
+When <tt/outer::inner::bar/ is referenced in the <tt/lda/ instruction, the
+assembler will first search in the local scope for a scope named <tt/outer/.
+Since none is found, the enclosing scope (<tt/another/) is checked. There is
+still no scope named <tt/outer/, so scope <tt/foo/ is checked, and finally
+scope <tt/outer/ is found. Within this scope, <tt/inner/ is searched, and in
+this scope, the assembler looks for a symbol named <tt/bar/.
+
+Please note that once the anchor scope is found, all following scopes
+(<tt/inner/ in this case) are expected to be found exactly in this scope. The
+assembler will search the scope tree only for the first scope (if it is not
+anchored in the root scope). Starting from there on, there is no flexibility,
+so if the scope named <tt/outer/ found by the assembler does not contain a
+scope named <tt/inner/, this would be an error, even if such a pair does exist
+(one level up in global scope).
+
+Ambiguities that may be introduced by this search algorithm may be removed by
+anchoring the scope specification in the global scope. In the example above,
+if you want to access the "other" symbol <tt/bar/, you would have to write:
+
+<tscreen><verb>
+ .scope foo
+ .scope outer
+ .scope inner
+ bar = 1
+ .endscope
+ .endscope
+ .scope another
+ .scope nested
+ lda #::outer::inner::bar ; 2
+ .endscope
+ .endscope
+ .endscope
+
+ .scope outer
+ .scope inner
+ bar = 2
+ .endscope
+ .endscope
+</verb></tscreen>
+
+
+<sect>Address sizes<label id="address-sizes"><p>
+
+
+
+
+
+
<sect>Control commands<label id="control-commands">
<p>
the binary zero is only appended once (after the last one).
+<sect1><tt>.ASSERT</tt><label id=".ASSERT"><p>
+
+ Add an assertion. The command is followed by an expression, an action
+ specifier and a message that is output in case the assertion fails. The
+ action specifier may be one of <tt/warning/ or <tt/error/. The assertion
+ is passed to the linker and will be evaluated when segment placement has
+ been done.
+
+ Example:
+
+ <tscreen><verb>
+ .assert * = $8000, error, "Code not at $8000"
+ </verb></tscreen>
+
+ The example assertion will check that the current location is at $8000,
+ when the output file is written, and abort with an error if this is not
+ the case. More complex expressions are possible. The action specifier
+ <tt/warning/ outputs a warning, while the <tt/error/ specifier outputs
+ an error message. In the latter case, generation if the output file is
+ suppressed.
+
+
<sect1><tt>.AUTOIMPORT</tt><label id=".AUTOIMPORT"><p>
Is followed by a plus or a minus character. When switched on (using a
Example:
<tscreen><verb>
- .case - ; Identifiers are not case sensitive
+ .case - ; Identifiers are not case sensitive
+ </verb></tscreen>
+
+
+<sect1><tt>.CHARMAP</tt><label id=".CHARMAP"><p>
+
+ Apply a custom mapping for characters. The command is followed by two
+ numbers in the range 1..255. The first one is the index of the source
+ character, the second one is the mapping. The mapping applies to all
+ character and string constants when they generate output, and overrides
+ a mapping table specified with the <tt><ref id="option-t" name="-t"></tt>
+ command line switch.
+
+ Example:
+
+ <tscreen><verb>
+ .charmap $41, $61 ; Map 'A' to 'a'
</verb></tscreen>
id=".DESTRUCTOR" name=".DESTRUCTOR"></tt> commands are actually shortcuts
for <tt/.CONDES/ with a type of <tt/constructor/ resp. <tt/destructor/.
- After the type, an optional priority may be specified. If no priority is
- given, the default priority of 7 is used. Be careful when assigning
- priorities to your own module constructors so they won't interfere with the
- ones in the cc65 library.
+ After the type, an optional priority may be specified. Higher numeric values
+ mean higher priority. If no priority is given, the default priority of 7 is
+ used. Be careful when assigning priorities to your own module constructors
+ so they won't interfere with the ones in the cc65 library.
Example:
<tscreen><verb>
- .condes ModuleInit, constructor
- .condes ModInit, 0, 16
+ .condes ModuleInit, constructor
+ .condes ModInit, 0, 16
</verb></tscreen>
See the <tt><ref id=".CONSTRUCTOR" name=".CONSTRUCTOR"></tt> and <tt><ref
A constructor is always exported as an absolute (16 bit) symbol. You don't
need to use an additional <tt/.export/ statement, this is implied by
<tt/.constructor/. It may have an optional priority that is separated by a
- comma. If no priority is given, the default priority of 7 is used. Be
- careful when assigning priorities to your own module constructors so they
- won't interfere with the ones in the cc65 library.
+ comma. Higher numeric values mean a higher priority. If no priority is
+ given, the default priority of 7 is used. Be careful when assigning
+ priorities to your own module constructors so they won't interfere with the
+ ones in the cc65 library.
Example:
<sect1><tt>.CPU</tt><label id=".CPU"><p>
Reading this pseudo variable will give a constant integer value that
- tells which instruction set is currently enabled. Possible values are:
-
- <tscreen><verb>
- 0 --> 6502
- 1 --> 65SC02
- 2 --> 65SC816
- 3 --> SunPlus SPC
- </verb></tscreen>
+ tells which CPU is currently enabled. It can also tell which instruction
+ set the CPU is able to translate. The value read from the pseudo variable
+ should be further examined by using one of the constants defined by the
+ "cpu" macro package (see <tt/<ref id=".MACPACK" name=".MACPACK">/).
It may be used to replace the .IFPxx pseudo instructions or to construct
even more complex expressions.
Example:
<tscreen><verb>
- .if (.cpu = 0) .or (.cpu = 1)
- txa
- pha
- tya
- pha
- .else
- phx
- phy
- .endif
+ .macpack cpu
+ .if (.cpu .bitand CPU_ISET_65816)
+ phx
+ phy
+ .else
+ txa
+ pha
+ tya
+ pha
+ .endif
</verb></tscreen>
A destructor is always exported as an absolute (16 bit) symbol. You don't
need to use an additional <tt/.export/ statement, this is implied by
<tt/.destructor/. It may have an optional priority that is separated by a
- comma. If no priority is given, the default priority of 7 is used. Be
- careful when assigning priorities to your own module destructors so they
- won't interfere with the ones in the cc65 library.
+ comma. Higher numerical values mean a higher priority. If no priority is
+ given, the default priority of 7 is used. Be careful when assigning
+ priorities to your own module destructors so they won't interfere with the
+ ones in the cc65 library.
Example:
is read from an include file.
+<sect1><tt>.ENDENUM</tt><label id=".ENDENUM"><p>
+
+ End a <tt><ref id=".ENUM" name=".ENUM"></tt> declaration.
+
+
<sect1><tt>.ENDIF</tt><label id=".ENDIF"><p>
Conditional assembly: Close a <tt><ref id=".IF" name=".IF..."></tt> or
End a <tt><ref id=".REPEAT" name=".REPEAT"></tt> block.
+<sect1><tt>.ENDSCOPE</tt><label id=".ENDSCOPE"><p>
+
+ End of local lexical level (see <tt/<ref id=".SCOPE" name=".SCOPE">/).
+
+
+<sect1><tt>.ENDSTRUCT</tt><label id=".ENDSTRUCT"><p>
+
+ Ends a struct definition. See the section named <ref id="structs"
+ name="Structs and unions">.
+
+
+<sect1><tt>.ENUM</tt><label id=".ENUM"><p>
+
+ Start an enumeration. This directive is very similar to the C <tt/enum/
+ keyword. If a name is given, a new scope is created for the enumeration,
+ otherwise the enumeration members are placed in the enclosing scope.
+
+ In the enumeration body, symbols are declared. The first symbol has a value
+ of zero, and each following symbol will get the value of the preceeding plus
+ one. This behaviour may be overriden by an explicit assignment. Two symbols
+ may have the same value.
+
+ Example:
+
+ <tscreen><verb>
+ .enum errorcodes
+ no_error
+ file_error
+ parse_error
+ .endenum
+ </verb></tscreen>
+
+ Above example will create a new scope named <tt/errorcodes/ with three
+ symbols in it that get the values 0, 1 and 2 respectively. Another way
+ to write this would have been:
+
+ <tscreen><verb>
+ .scope errorcodes
+ no_error = 0
+ file_error = 1
+ parse_error = 2
+ .endscope
+ </verb></tscreen>
+
+ Please note that explicit scoping must be used to access the identifiers:
+
+ <tscreen><verb>
+ .word errorcodes::no_error
+ </verb></tscreen>
+
+ A more complex example:
+
+ <tscreen><verb>
+ .enum
+ EUNKNOWN = -1
+ EOK
+ EFILE
+ EBUSY
+ EAGAIN
+ EWOULDBLOCK = EAGAIN
+ .endenum
+ </verb></tscreen>
+
+ In this example, the enumeration does not have a name, which means that the
+ members will be visible in the enclosing scope and can be used in this scope
+ without explicit scoping. The first member (<tt/EUNKNOWN/) has the value -1.
+ The value for the following members is incremented by one, so <tt/EOK/ would
+ be zero and so on. <tt/EWOULDBLOCK/ is an alias for <tt/EGAIN/, so it has an
+ override for the value using an already defined symbol.
+
+
<sect1><tt>.ERROR</tt><label id=".ERROR"><p>
Force an assembly error. The assembler will output an error message
</verb></tscreen>
+<sect1><tt>.FORCEIMPORT</tt><label id=".FORCEIMPORT"><p>
+
+ Import an absolute symbol from another module. The command is followed by a
+ comma separated list of symbols to import. The command is similar to <tt>
+ <ref id=".IMPORT" name=".IMPORT"></tt>, but the import reference is always
+ written to the generated object file, even if the symbol is never referenced
+ (<tt><ref id=".IMPORT" name=".IMPORT"></tt> will not generate import
+ references for unused symbols).
+
+ Example:
+
+ <tscreen><verb>
+ .forceimport needthisone, needthistoo
+ </verb></tscreen>
+
+ See: <tt><ref id=".IMPORT" name=".IMPORT"></tt>
+
+
<sect1><tt>.GLOBAL</tt><label id=".GLOBAL"><p>
Declare symbols as global. Must be followed by a comma separated list of
(see <tt><ref id=".PC02" name=".PC02"></tt> command).
+<sect1><tt>.IFPSC02</tt><label id=".IFPSC02"><p>
+
+ Conditional assembly: Check if the assembler is currently in 65SC02 mode
+ (see <tt><ref id=".PSC02" name=".PSC02"></tt> command).
+
+
<sect1><tt>.IFREF</tt><label id=".IFREF"><p>
Conditional assembly: Check if a symbol is referenced. Must be followed
<tscreen><verb>
generic Defines generic macros like add and sub.
longbranch Defines conditional long jump macros.
+ cbm Defines the scrcode macro
+ cpu Defines constants for the .CPU variable
</verb></tscreen>
Including a macro package twice, or including a macro package that
<sect1><tt>.P02</tt><label id=".P02"><p>
- Enable the 6502 instruction set, disable 65C02 and 65816 instructions.
- This is the default if not overridden by the <tt/--cpu/ command line
- option.
+ Enable the 6502 instruction set, disable 65SC02, 65C02 and 65816
+ instructions. This is the default if not overridden by the
+ <tt><ref id="option--cpu" name="--cpu"></tt> command line option.
- See: <tt><ref id=".PC02" name=".PC02"></tt> and <tt><ref id=".P816"
- name=".P816"></tt>
+ See: <tt><ref id=".PC02" name=".PC02"></tt>, <tt><ref id=".PSC02"
+ name=".PSC02"></tt> and <tt><ref id=".P816" name=".P816"></tt>
<sect1><tt>.P816</tt><label id=".P816"><p>
- Enable the 65816 instruction set. This is a superset of the 65C02 and
+ Enable the 65816 instruction set. This is a superset of the 65SC02 and
6502 instruction sets.
- See: <tt><ref id=".P02" name=".P02"></tt> and <tt><ref id=".PC02"
- name=".PC02"></tt>
+ See: <tt><ref id=".P02" name=".P02"></tt>, <tt><ref id=".PSC02"
+ name=".PSC02"></tt> and <tt><ref id=".PC02" name=".PC02"></tt>
<sect1><tt>.PAGELEN, .PAGELENGTH</tt><label id=".PAGELENGTH"><p>
<sect1><tt>.PC02</tt><label id=".PC02"><p>
Enable the 65C02 instructions set. This instruction set includes all
- 6502 instructions.
+ 6502 and 65SC02 instructions.
- See: <tt><ref id=".P02" name=".P02"></tt> and <tt><ref id=".P816"
- name=".P816"></tt>
+ See: <tt><ref id=".P02" name=".P02"></tt>, <tt><ref id=".PSC02"
+ name=".PSC02"></tt> and <tt><ref id=".P816" name=".P816"></tt>
-<sect1><tt>.PROC</tt><label id=".PROC"><p>
+<sect1><tt>.POPSEG</tt><label id=".POPSEG"><p>
+
+ Pop the last pushed segment from the stack, and set it.
+
+ This command will switch back to the segment that was last pushed onto the
+ segment stack using the <tt><ref id=".PUSHSEG" name=".PUSHSEG"></tt>
+ command, and remove this entry from the stack.
+
+ The assembler will print an error message if the segment stack is empty
+ when this command is issued.
+
+ See: <tt><ref id=".PUSHSEG" name=".PUSHSEG"></tt>
- Start a nested lexical level. All new symbols from now on are in the local
- lexical level and are not accessible from outside. Symbols defined outside
- this local level may be accessed as long as their names are not used for new
- symbols inside the level. Symbols names in other lexical levels do not
- clash, so you may use the same names for identifiers. The lexical level ends
- when the <tt><ref id=".ENDPROC" name=".ENDPROC"></tt> command is read.
- Lexical levels may be nested up to a depth of 16.
- The command may be followed by an identifier, in this case the
- identifier is declared in the outer level as a label having the value of
- the program counter at the start of the lexical level.
+<sect1><tt>.PROC</tt><label id=".PROC"><p>
+
+ Start a nested lexical level with the given name and adds a symbol with this
+ name to the enclosing scope. All new symbols from now on are in the local
+ lexical level and are accessible from outside only via <ref id="scopesyntax"
+ name="explicit scope specification">. Symbols defined outside this local
+ level may be accessed as long as their names are not used for new symbols
+ inside the level. Symbols names in other lexical levels do not clash, so you
+ may use the same names for identifiers. The lexical level ends when the
+ <tt><ref id=".ENDPROC" name=".ENDPROC"></tt> command is read. Lexical levels
+ may be nested up to a depth of 16 (this is an artificial limit to protect
+ against errors in the source).
Note: Macro names are always in the global level and in a separate name
space. There is no special reason for this, it's just that I've never
dey
bne L1 ; Reference local symbol
rts
- .endproc ; Leave lexical level
+ .endproc ; Leave lexical level
</verb></tscreen>
- See: <tt><ref id=".ENDPROC" name=".ENDPROC"></tt>
+ See: <tt/<ref id=".ENDPROC" name=".ENDPROC">/ and <tt/<ref id=".SCOPE"
+ name=".SCOPE">/
+
+
+<sect1><tt>.PSC02</tt><label id=".PSC02"><p>
+
+ Enable the 65SC02 instructions set. This instruction set includes all
+ 6502 instructions.
+
+ See: <tt><ref id=".P02" name=".P02"></tt>, <tt><ref id=".PC02"
+ name=".PC02"></tt> and <tt><ref id=".P816" name=".P816"></tt>
+
+
+<sect1><tt>.PUSHSEG</tt><label id=".PUSHSEG"><p>
+
+ Push the currently active segment onto a stack. The entries on the stack
+ include the name of the segment and the segment type. The stack has a size
+ of 16 entries.
+
+ <tt/.PUSHSEG/ allows together with <tt><ref id=".POPSEG" name=".POPSEG"></tt>
+ to switch to another segment and to restore the old segment later, without
+ even knowing the name and type of the current segment.
+
+ The assembler will print an error message if the segment stack is already
+ full, when this command is issued.
+
+ See: <tt><ref id=".POPSEG" name=".POPSEG"></tt>
<sect1><tt>.REF, .REFERENCED</tt><label id=".REFERENCED"><p>
<tscreen><verb>
; Reserve 12 bytes of memory with value $AA
- .res 12, $AA
+ .res 12, $AA
</verb></tscreen>
See also the <tt><ref id=".SEGMENT" name=".SEGMENT"></tt> command.
+<sect1><tt>.SCOPE</tt><label id=".SCOPE"><p>
+
+ Start a nested lexical level with the given name. All new symbols from now
+ on are in the local lexical level and are accessible from outside only via
+ <ref id="scopesyntax" name="explicit scope specification">. Symbols defined
+ outside this local level may be accessed as long as their names are not used
+ for new symbols inside the level. Symbols names in other lexical levels do
+ not clash, so you may use the same names for identifiers. The lexical level
+ ends when the <tt><ref id=".ENDSCOPE" name=".ENDSCOPE"></tt> command is
+ read. Lexical levels may be nested up to a depth of 16 (this is an
+ artificial limit to protect against errors in the source).
+
+ Note: Macro names are always in the global level and in a separate name
+ space. There is no special reason for this, it's just that I've never
+ had any need for local macro definitions.
+
+ Example:
+
+ <tscreen><verb>
+ .scope Error ; Start new scope named Error
+ None = 0 ; No error
+ File = 1 ; File error
+ Parse = 2 ; Parse error
+ .endproc ; Close lexical level
+
+ ...
+ lda #Error::File ; Use symbol from scope Error
+ </verb></tscreen>
+
+ See: <tt/<ref id=".ENDSCOPE" name=".ENDSCOPE">/ and <tt/<ref id=".PROC"
+ name=".PROC">/
+
+
<sect1><tt>.SEGMENT</tt><label id=".SEGMENT"><p>
Switch to another segment. Code and data is always emitted into a
id=".RODATA" name=".RODATA"></tt>
+<sect1><tt>.SETCPU</tt><label id=".SETCPU"><p>
+
+ Switch the CPU instruction set. The command is followed by a string that
+ specifies the CPU. Possible values are those that can also be supplied to
+ the <tt><ref id="option--cpu" name="--cpu"></tt> command line option,
+ namely: 6502, 65SC02, 65C02, 65816 and sunplus. Please note that support
+ for the sunplus CPU is not available in the freeware version, because the
+ instruction set of the sunplus CPU is "proprietary and confidential".
+
+ See: <tt><ref id=".CPU" name=".CPU"></tt>,
+ <tt><ref id=".IFP02" name=".IFP02"></tt>,
+ <tt><ref id=".IFP816" name=".IFP816"></tt>,
+ <tt><ref id=".IFPC02" name=".IFPC02"></tt>,
+ <tt><ref id=".IFPSC02" name=".IFPSC02"></tt>,
+ <tt><ref id=".P02" name=".P02"></tt>,
+ <tt><ref id=".P816" name=".P816"></tt>,
+ <tt><ref id=".PC02" name=".PC02"></tt>,
+ <tt><ref id=".PSC02" name=".PSC02"></tt>
+
+
+<sect1><tt>.SIZEOF</tt><label id=".SIZEOF"><p>
+
+ <tt/.SIZEOF/ is a pseudo function that returns the size of its argument. The
+ argument can be a struct/union, a struct member, a procedure, or a label. In
+ case of a procedure or label, its size is defined by the amount of data
+ placed in the segment where the label is relative to. If a line of code
+ switches segments (for example in a macro) data placed in other segments
+ does not count for the size.
+
+ Please note that a symbol or scope must exist, before it is used together with
+ <tt/.SIZEOF/ (this may get relaxed later, but will always be true for scopes).
+ A scope has preference over a symbol with the same name, so if the last part
+ of a name represents both, a scope and a symbol, the scope is choosen over the
+ symbol.
+
+ After the following code:
+
+ <tscreen><verb>
+ .struct Point ; Struct size = 4
+ xcoord .word
+ xcoord .word
+ .endstruct
+
+ P: .tag Point ; Declare a point
+ @P: .tag Point ; Declare another point
+
+ .code
+ .proc Code
+ nop
+ .proc Inner
+ nop
+ .endproc
+ nop
+ .endproc
+
+ .proc Data
+ .data ; Segment switch!!!
+ .res 4
+ .endproc
+ </verb></tscreen>
+
+ <descrip>
+ <tag><tt/.sizeof(Point)/</tag>
+ will have the value 4, because this is the size of struct <tt/Point/.
+
+ <tag><tt/.sizeof(Point::xcoord)/</tag>
+ will have the value 2, because this is the size of the member <tt/xcoord/
+ in struct <tt/Point/.
+
+ <tag><tt/.sizeof(P)/</tag>
+ will have the value 4, this is the size of the data declared on the same
+ source line as the label <tt/P/, which is in the same segment that <tt/P/
+ is relative to.
+
+ <tag><tt/.sizeof(@P)/</tag>
+ will have the value 4, see above. The example demonstrates that <tt/.SIZEOF/
+ does also work for cheap local symbols.
+
+ <tag><tt/.sizeof(Code)/</tag>
+ will have the value 3, since this is amount of data emitted into the code
+ segment, the segment that was active when <tt/Code/ was entered. Note that
+ this value includes the amount of data emitted in child scopes (in this
+ case <tt/Code::Inner/).
+
+ <tag><tt/.sizeof(Code::Inner)/</tag>
+ will have the value 1 as expected.
+
+ <tag><tt/.sizeof(Data)/</tag>
+ will have the value 0. Data is emitted within the scope <tt/Data/, but since
+ the segment is switched after entry, this data is emitted into another
+ segment.
+ </descrip>
+
+
<sect1><tt>.SMART</tt><label id=".SMART"><p>
Switch on or off smart mode. The command must be followed by a '+' or
is off (that is, the assembler doesn't try to be smart), but this
default may be changed by the -s switch on the command line.
- In smart mode the assembler will track usage of the <tt/REP/ and <tt/SEP/
- instructions in 65816 mode and update the operand sizes accordingly. If
- the operand of such an instruction cannot be evaluated by the assembler
- (for example, because the operand is an imported symbol), a warning is
- issued. Beware: Since the assembler cannot trace the execution flow this
- may lead to false results in some cases. If in doubt, use the <tt/.Inn/ and
- <tt/.Ann/ instructions to tell the assembler about the current settings.
+ In smart mode the assembler will do the following:
+
+ <itemize>
+ <item>Track usage of the <tt/REP/ and <tt/SEP/ instructions in 65816 mode
+ and update the operand sizes accordingly. If the operand of such an
+ instruction cannot be evaluated by the assembler (for example, because
+ the operand is an imported symbol), a warning is issued. Beware: Since
+ the assembler cannot trace the execution flow this may lead to false
+ results in some cases. If in doubt, use the <tt/.Inn/ and <tt/.Ann/
+ instructions to tell the assembler about the current settings.
+ <item>In 65816 mode, replace a <tt/RTS/ instruction by <tt/RTL/ if it is
+ used within a procedure declared as <tt/far/, or if the procedure has
+ no explicit address specification, but it is <tt/far/ because of the
+ memory model used.
+ </itemize>
Example:
.smart - ; Stop being smart
</verb></tscreen>
+ See: <tt><ref id=".A16" name=".A16"></tt>,
+ <tt><ref id=".A8" name=".A8"></tt>,
+ <tt><ref id=".I16" name=".I16"></tt>,
+ <tt><ref id=".I8" name=".I8"></tt>
+
<sect1><tt>.STRAT</tt><label id=".STRAT"><p>
</verb></tscreen>
+<sect1><tt>.STRUCT</tt><label id=".STRUCT"><p>
+
+ Starts a struct definition. See the section named <ref id="structs"
+ name="Structs and unions">.
+
+
+<sect1><tt>.SUNPLUS</tt><label id=".SUNPLUS"><p>
+
+ Enable the SunPlus instructions set. This command will not work in the
+ freeware version of the assembler, because the instruction set is
+ "proprietary and confidential".
+
+ See: <tt><ref id=".P02" name=".P02"></tt>, <tt><ref id=".PSC02"
+ name=".PSC02"></tt>, <tt><ref id=".PC02" name=".PC02"></tt>, and
+ <tt><ref id=".P816" name=".P816"></tt>
+
+
+<sect1><tt>.TAG</tt><label id=".TAG"><p>
+
+ Allocate space for a struct or union.
+
+ Example:
+
+ <tscreen><verb>
+ .struct Point
+ xcoord .word
+ ycoord .word
+ .endstruct
+
+ .bss
+ .tag Point ; Allocate 4 bytes
+ </verb></tscreen>
+
+
<sect1><tt>.TCOUNT</tt><label id=".TCOUNT"><p>
Builtin function. The function accepts a token list in braces. The
</verb></tscreen>
+<sect1><tt>.VERSION</tt><label id=".VERSION"><p>
+
+ Reading this pseudo variable will give the assembler version according to
+ the following formula:
+
+ VER_MAJOR*$100 + VER_MINOR*$10 + VER_PATCH
+
+ It may be used to encode the assembler version or check the assembler for
+ special features not available with older versions.
+
+ Example:
+
+ Version 2.11.1 of the assembler will return $2B1 as numerical constant when
+ reading the pseudo variable <tt/.VERSION/.
+
+
<sect1><tt>.WARNING</tt><label id=".WARNING"><p>
Force an assembly warning. The assembler will output a warning message
</verb></tscreen>
+<sect1>Detecting parameter types<p>
+
+Sometimes it is nice to write a macro that acts differently depending on the
+type of the argument supplied. An example would be a macro that loads a 16 bit
+value from either an immediate operand, or from memory. The <tt/<ref
+id=".MATCH" name=".MATCH">/ and <tt/<ref id=".XMATCH" name=".XMATCH">/
+functions will allow you to do exactly this:
+
+<tscreen><verb>
+ .macro ldax arg
+ .if (.match (.left (1, arg), #))
+ ; immediate mode
+ lda #<(.right (.tcount (arg)-1, arg))
+ ldx #>(.right (.tcount (arg)-1, arg))
+ .else
+ ; assume absolute or zero page
+ lda arg
+ ldx 1+(arg)
+ .endif
+ .endmacro
+</verb></tscreen>
+
+Using the <tt/<ref id=".MATCH" name=".MATCH">/ function, the macro is able to
+check if its argument begins with a hash mark. If so, two immediate loads are
+emitted, Otherwise a load from an absolute zero page memory location is
+assumed. So this macro can be used as
+
+<tscreen><verb>
+ foo: .word $5678
+ ...
+ ldax #$1234 ; X=$12, A=$34
+ ...
+ ldax foo ; X=$56, A=$78
+</verb></tscreen>
+
+
<sect1>Recursive macros<p>
Macros may be used recursively:
+<sect1><tt>.MACPACK cbm</tt><p>
+
+The cbm macro package will define a macro named <tt/scrcode/. It takes a
+string as argument and places this string into memory translated into screen
+codes.
+
+
+<sect1><tt>.MACPACK cpu</tt><p>
+
+This macro package does not define any macros but constants used to examine
+the value read from the <tt/<ref id=".CPU" name=".CPU">/ pseudo variable. For
+each supported CPU a constant similar to
+
+<tscreen><verb>
+ CPU_6502
+ CPU_65SC02
+ CPU_65C02
+ CPU_65816
+ CPU_SUNPLUS
+</verb></tscreen>
+
+is defined. These constants may be used to determine the exact type of the
+currently enabled CPU. In addition to that, for each CPU instruction set,
+another constant is defined:
+
+<tscreen><verb>
+ CPU_ISET_6502
+ CPU_ISET_65SC02
+ CPU_ISET_65C02
+ CPU_ISET_65816
+ CPU_ISET_SUNPLUS
+</verb></tscreen>
+
+The value read from the <tt/<ref id=".CPU" name=".CPU">/ pseudo variable may
+be checked with <tt/<ref id="operators" name=".BITAND">/ to determine if the
+currently enabled CPU supports a specific instruction set. For example the
+65C02 supports all instructions of the 65SC02 CPU, so it has the
+<tt/CPU_ISET_65SC02/ bit set in addition to its native <tt/CPU_ISET_65C02/
+bit. Using
+
+<tscreen><verb>
+ .if (.cpu .bitand CPU_ISET_65SC02)
+ lda (sp)
+ .else
+ ldy #$00
+ lda (sp),y
+ .endif
+</verb></tscreen>
+
+it is possible to determine if the
+
+<tscreen><verb>
+ lda (sp)
+</verb></tscreen>
+
+instruction is supported, which is the case for the 65SC02, 65C02 and 65816
+CPUs (the latter two are upwards compatible to the 65SC02).
+
+
+
+<sect>Structs and unions<label id="structs"><p>
+
+Structs and unions are special forms of <ref id="scopes" name="scopes">. They
+are to some degree comparable to their C counterparts. Both have a list of
+members. Each member allocates storage and may optionally have a name, which,
+in case of a struct, is the offset from the beginning and, in case of a union
+is always zero.
+
+Here is an example for a very simple struct with two members and a total size
+of 4 bytes:
+
+<tscreen><verb>
+ .struct Point
+ xcoord .word
+ ycoord .word
+ .endstruct
+</verb></tscreen>
+
+A union shares the total space between all its members, its size is the same
+as that of the largest member.
+
+A struct or union must not necessarily have a name. If it is anonymous, no
+local scope is opened, the identifiers used to name the members are placed
+into the current scope instead.
+
+A struct may contain unnamed members and definitions of local structs. The
+storage allocators may contain a multiplier, as in the example below:
+
+<tscreen><verb>
+ .struct Circle
+ .struct Point
+ .word 2 ; Allocate two words
+ .endstruct
+ Radius .word
+ .endstruct
+</verb></tscreen>
+
+Using the <ref id=".TAG" name=".TAG"> keyword, it is possible to embedd
+already defined structs or unions in structs:
+
+<tscreen><verb>
+ .struct Point
+ xcoord .word
+ ycoord .word
+ .endstruct
+
+ .struct Circle
+ Origin .tag Point
+ Radius .word
+ .endstruct
+</verb></tscreen>
+
+Space for a struct or union may be allocated using the <ref id=".TAG"
+name=".TAG"> directive.
+
+
+
<sect>Module constructors/destructors<label id="condes"><p>
<em>Note:</em> This section applies mostly to C programs, so the explanation
</enum>
+<sect1>Calling order<p>
+
+Both, constructors and destructors are sorted in increasing priority order by
+the linker when using one of the builtin linker configurations, so the
+functions with lower priorities come first and are followed by those with
+higher priorities. The C library runtime subroutine that walks over the
+constructor and destructor tables calls the functions starting from the top of
+the table - which means that functions with a high priority are called first.
+
+So when using the C runtime, both constructors and destructors are called with
+high priority functions first, followed by low priority functions.
+
+
<sect1>Pitfalls<p>
When creating and using module constructors and destructors, please take care
<item>
Constructors and destructors may have priorities. These priorities determine
the order of the functions in the table. If your intialization or cleanup code
-does depend on other intiialization or cleanup code, you have to choose the
+does depend on other initialization or cleanup code, you have to choose the
priority for the functions accordingly.
<item>
</itemize>
+<sect>Porting sources from other assemblers<p>
+
+Sometimes it is necessary to port code written for older assemblers to ca65.
+In some cases, this can be done without any changes to the source code by
+using the emulation features of ca65 (see <tt><ref id=".FEATURE"
+name=".FEATURE"></tt>). In other cases, it is necessary to make changes to the
+source code.
+
+Probably the biggest difference is the handling of the <tt><ref id=".ORG"
+name=".ORG"></tt> directive. ca65 generates relocatable code, and placement is
+done by the linker. Most other assemblers generate absolute code, placement is
+done within the assembler and there is no external linker.
+
+In general it is not a good idea to write new code using the emulation
+features of the assembler, but there may be situations where even this rule is
+not valid.
+
+<sect1>TASS<p>
+
+You need to use some of the ca65 emulation features to simulate the behaviour
+of such simple assemblers.
+
+<enum>
+<item>Prepare your sourcecode like this:
+
+<tscreen><verb>
+ ; if you want TASS style labels without colons
+ .feature labels_without_colons
+
+ ; if you want TASS style character constants
+ ; ("a" instead of the default 'a')
+ .feature loose_char_term
+
+ .word *+2 ; the cbm load address
+ [yourcode here]
+</verb></tscreen>
+
+notice that the two emulation features are mostly useful for porting
+sources originally written in/for TASS, they are not needed for the
+actual "simple assembler operation" and are not recommended if you are
+writing new code from scratch.
+
+<item>Replace all program counter assignments (which are not possible in ca65
+by default, and the respective emulation feature works different from what
+you'd expect) by another way to skip to another memory location, for example
+the <tt><ref id=".RES" name=".RES"></tt>directive.
+
+<tscreen><verb>
+ ; *=$2000
+ .res $2000-* ; reserve memory up to $2000
+</verb></tscreen>
+
+notice that other than the original TASS, ca65 can never move the
+programmcounter backwards - think of it as if you are assembling to disc with
+TASS.
+
+<item>Conditional assembly (<tt/.ifeq//<tt/.endif//<tt/.goto/ etc.) must be
+rewritten to match ca65 syntax. Most importantly notice that due to the lack
+of <tt/.goto/, everything involving loops must be replaced by
+<tt><ref id=".REPEAT" name=".REPEAT"></tt>.
+
+<item>To assemble code to a different address than it is executed at, use the
+<tt><ref id=".ORG" name=".ORG"></tt> directive instead of
+<tt/.offs/-constructs.
+
+<tscreen><verb>
+ .org $1800
+
+ [floppy code here]
+
+ .reloc ; back to normal
+</verb></tscreen>
+
+<item>Then assemble like this:
+
+<tscreen><verb>
+ cl65 --start-addr 0x0ffe -t none myprog.s -o myprog.prg
+</verb></tscreen>
+
+notice that you need to use the actual start address minus two, since two
+bytes are used for the cbm load address.
+
+</enum>
<sect>Bugs/Feedback<p>
<sect>Copyright<p>
-ca65 (and all cc65 binutils) are (C) Copyright 1998-2001 Ullrich von
+ca65 (and all cc65 binutils) are (C) Copyright 1998-2003 Ullrich von
Bassewitz. For usage of the binaries and/or sources the following
conditions do apply:
projects / cc65 / blobdiff