@item @b{Keil ULINK v1}
@* Link: @url{http://www.keil.com/ulink1/}
+
+@item @b{TI XDS110 Debug Probe}
+@* The XDS110 is included as the embedded debug probe on many Texas Instruments
+LaunchPad evaluation boards.
+@* Link: @url{http://processors.wiki.ti.com/index.php/XDS110}
+@* Link: @url{http://processors.wiki.ti.com/index.php/XDS_Emulation_Software_Package#XDS110_Support_Utilities}
@end itemize
@section IBM PC Parallel Printer Port Based
@end example
Triggering a mass erase is also useful when users want to disable readout protection.
+@end deffn
+
+@deffn {Flash Driver} cc26xx
+All versions of the SimpleLink CC13xx and CC26xx microcontrollers from Texas
+Instruments include internal flash. The cc26xx flash driver supports both the
+CC13xx and CC26xx family of devices. The driver automatically recognizes the
+specific version's flash parameters and autoconfigures itself. Flash bank 0
+starts at address 0.
+
+@example
+flash bank $_FLASHNAME cc26xx 0 0 0 0 $_TARGETNAME
+@end example
+@end deffn
+@deffn {Flash Driver} cc3220sf
+The CC3220SF version of the SimpleLink CC32xx microcontrollers from Texas
+Instruments includes 1MB of internal flash. The cc3220sf flash driver only
+supports the internal flash. The serial flash on SimpleLink boards is
+programmed via the bootloader over a UART connection. Security features of
+the CC3220SF may erase the internal flash during power on reset. Refer to
+documentation at @url{www.ti.com/cc3220sf} for details on security features
+and programming the serial flash.
+
+@example
+flash bank $_FLASHNAME cc3220sf 0 0 0 0 $_TARGETNAME
+@end example
@end deffn
@deffn {Flash Driver} efm32
@end example
@end deffn
+@deffn {Flash Driver} msp432
+All versions of the SimpleLink MSP432 microcontrollers from Texas
+Instruments include internal flash. The msp432 flash driver automatically
+recognizes the specific version's flash parameters and autoconfigures itself.
+Main program flash (starting at address 0) is flash bank 0. Information flash
+region on MSP432P4 versions (starting at address 0x200000) is flash bank 1.
+
+@example
+flash bank $_FLASHNAME msp432 0 0 0 0 $_TARGETNAME
+@end example
+
+@deffn Command {msp432 mass_erase} [main|all]
+Performs a complete erase of flash. By default, @command{mass_erase} will erase
+only the main program flash.
+
+On MSP432P4 versions, using @command{mass_erase all} will erase both the
+main program and information flash regions. To also erase the BSL in information
+flash, the user must first use the @command{bsl} command.
+@end deffn
+
+@deffn Command {msp432 bsl} [unlock|lock]
+On MSP432P4 versions, @command{bsl} unlocks and locks the bootstrap loader (BSL)
+region in information flash so that flash commands can erase or write the BSL.
+Leave the BSL locked to prevent accidentally corrupting the bootstrap loader.
+
+To erase and program the BSL:
+@example
+msp432 bsl unlock
+flash erase_address 0x202000 0x2000
+flash write_image bsl.bin 0x202000
+msp432 bsl lock
+@end example
+@end deffn
+@end deffn
+
@deffn {Flash Driver} niietcm4
This drivers handles the integrated NOR flash on NIIET Cortex-M4
based controllers. Flash size and sector layout are auto-configured by the driver.
@end deffn
@end deffn
+@deffn {Flash Driver} psoc5lp
+All members of the PSoC 5LP microcontroller family from Cypress
+include internal program flash and use ARM Cortex-M3 cores.
+The driver probes for a number of these chips and autoconfigures itself,
+apart from the base address.
+
+@example
+flash bank $_FLASHNAME psoc5lp 0x00000000 0 0 0 $_TARGETNAME
+@end example
+
+@b{Note:} PSoC 5LP chips can be configured to have ECC enabled or disabled.
+@quotation Attention
+If flash operations are performed in ECC-disabled mode, they will also affect
+the ECC flash region. Erasing a 16k flash sector in the 0x00000000 area will
+then also erase the corresponding 2k data bytes in the 0x48000000 area.
+Writing to the ECC data bytes in ECC-disabled mode is not implemented.
+@end quotation
+
+Commands defined in the @var{psoc5lp} driver:
+
+@deffn Command {psoc5lp mass_erase}
+Erases all flash data and ECC/configuration bytes, all flash protection rows,
+and all row latches in all flash arrays on the device.
+@end deffn
+@end deffn
+
+@deffn {Flash Driver} psoc5lp_eeprom
+All members of the PSoC 5LP microcontroller family from Cypress
+include internal EEPROM and use ARM Cortex-M3 cores.
+The driver probes for a number of these chips and autoconfigures itself,
+apart from the base address.
+
+@example
+flash bank $_CHIPNAME.eeprom psoc5lp_eeprom 0x40008000 0 0 0 $_TARGETNAME
+@end example
+@end deffn
+
+@deffn {Flash Driver} psoc5lp_nvl
+All members of the PSoC 5LP microcontroller family from Cypress
+include internal Nonvolatile Latches and use ARM Cortex-M3 cores.
+The driver probes for a number of these chips and autoconfigures itself.
+
+@example
+flash bank $_CHIPNAME.nvl psoc5lp_nvl 0 0 0 0 $_TARGETNAME
+@end example
+
+PSoC 5LP chips have multiple NV Latches:
+
+@itemize
+@item Device Configuration NV Latch - 4 bytes
+@item Write Once (WO) NV Latch - 4 bytes
+@end itemize
+
+@b{Note:} This driver only implements the Device Configuration NVL.
+
+The @var{psoc5lp} driver reads the ECC mode from Device Configuration NVL.
+@quotation Attention
+Switching ECC mode via write to Device Configuration NVL will require a reset
+after successful write.
+@end quotation
+@end deffn
+
@deffn {Flash Driver} psoc6
Supports PSoC6 (CY8C6xxx) family of Cypress microcontrollers.
PSoC6 is a dual-core device with CM0+ and CM4 cores. Both cores share
debugger.
@end deffn
+@deffn Command {arm semihosting_resexit} [@option{enable}|@option{disable}]
+@cindex ARM semihosting
+Enable resumable SEMIHOSTING_SYS_EXIT.
+
+When SEMIHOSTING_SYS_EXIT is called outside a debug session,
+things are simple, the openocd process calls exit() and passes
+the value returned by the target.
+
+When SEMIHOSTING_SYS_EXIT is called during a debug session,
+by default execution returns to the debugger, leaving the
+debugger in a HALT state, similar to the state entered when
+encountering a break.
+
+In some use cases, it is useful to have SEMIHOSTING_SYS_EXIT
+return normally, as any semihosting call, and do not break
+to the debugger.
+The standard allows this to happen, but the condition
+to trigger it is a bit obscure ("by performing an RDI_Execute
+request or equivalent").
+
+To make the SEMIHOSTING_SYS_EXIT call return normally, enable
+this option (default: disabled).
+@end deffn
+
@section ARMv4 and ARMv5 Architecture
@cindex ARMv4
@cindex ARMv5
projects / openocd / blobdiff