flash/nor/stellaris: allow to recover a locked device that can't be examined

[openocd] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 9adc80f34e538337aabfc86dba539392a3ef3b54..40864373c1e10271065bb02cbb3c59731548861c 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -5208,7 +5208,7 @@ supported.}
 @deffn {Flash Driver} lpc2000
 This is the driver to support internal flash of all members of the
 LPC11(x)00 and LPC1300 microcontroller families and most members of
-the LPC800, LPC1500, LPC1700, LPC1800, LPC2000, LPC4300 and LPC54100
+the LPC800, LPC1500, LPC1700, LPC1800, LPC2000, LPC4000 and LPC54100
 microcontroller families from NXP.
 
 @quotation Note
@@ -5225,15 +5225,16 @@ which must appear in the following order:
 @item @var{variant} ... required, may be
 @option{lpc2000_v1} (older LPC21xx and LPC22xx)
 @option{lpc2000_v2} (LPC213x, LPC214x, LPC210[123], LPC23xx and LPC24xx)
-@option{lpc1700} (LPC175x and LPC176x)
+@option{lpc1700} (LPC175x and LPC176x and LPC177x/8x)
 @option{lpc4300} - available also as @option{lpc1800} alias (LPC18x[2357] and
 LPC43x[2357])
 @option{lpc800} (LPC8xx)
 @option{lpc1100} (LPC11(x)xx and LPC13xx)
 @option{lpc1500} (LPC15xx)
 @option{lpc54100} (LPC541xx)
+@option{lpc4000} (LPC40xx)
 or @option{auto} - automatically detects flash variant and size for LPC11(x)00,
-LPC8xx, LPC13xx and LPC17xx
+LPC8xx, LPC13xx, LPC17xx and LPC40xx
 @item @var{clock_kHz} ... the frequency, in kiloHertz,
 at which the core is running
 @item @option{calc_checksum} ... optional (but you probably want to provide this!),
@@ -5479,12 +5480,12 @@ standard @command{flash erase_address} command.}
 flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME
 @end example
 
-@deffn Command {stellaris recover bank_id}
-Performs the @emph{Recovering a "Locked" Device} procedure to
-restore the flash specified by @var{bank_id} and its associated
-nonvolatile registers to their factory default values (erased).
-This is the only way to remove flash protection or re-enable
-debugging if that capability has been disabled.
+@deffn Command {stellaris recover}
+Performs the @emph{Recovering a "Locked" Device} procedure to restore
+the flash and its associated nonvolatile registers to their factory
+default values (erased). This is the only way to remove flash
+protection or re-enable debugging if that capability has been
+disabled.
 
 Note that the final "power cycle the chip" step in this procedure
 must be performed by hand, since OpenOCD can't do it.
@@ -8641,6 +8642,28 @@ Remember that most of the OpenOCD commands need to be prefixed with
 
 See @file{contrib/rpc_examples/} for specific client implementations.
 
+@section Tcl RPC server notifications
+@cindex RPC Notifications
+
+Notifications are sent asynchronously to other commands being executed over
+the RPC server, so the port must be polled continuously.
+
+Target event, state and reset notifications are emitted as Tcl associative arrays
+in the following format.
+
+@verbatim
+type target_event event [event-name]
+type target_state state [state-name]
+type target_reset mode [reset-mode]
+@end verbatim
+
+@deffn {Command} tcl_notifications [on/off]
+Toggle output of target notifications to the current Tcl RPC server.
+Only available from the Tcl RPC server.
+Defaults to off.
+
+@end deffn
+
 @node FAQ
 @chapter FAQ
 @cindex faq