flash/nor/stellaris: allow to recover a locked device that can't be examined

[openocd] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index ee94b24a4a470e8da3caa4d0562290e5e93415f8..40864373c1e10271065bb02cbb3c59731548861c 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -4133,22 +4133,6 @@ are examples; and there are many more.
 
 Several commands let you examine the list of targets:
 
-@deffn Command {target count}
-@emph{Note: target numbers are deprecated; don't use them.
-They will be removed shortly after August 2010, including this command.
-Iterate target using @command{target names}, not by counting.}
-
-Returns the number of targets, @math{N}.
-The highest numbered target is @math{N - 1}.
-@example
-set c [target count]
-for @{ set x 0 @} @{ $x < $c @} @{ incr x @} @{
-    # Assuming you have created this function
-    print_target_details $x
-@}
-@end example
-@end deffn
-
 @deffn Command {target current}
 Returns the name of the current target.
 @end deffn
@@ -4162,18 +4146,6 @@ foreach t [target names] @{
 @end example
 @end deffn
 
-@deffn Command {target number} number
-@emph{Note: target numbers are deprecated; don't use them.
-They will be removed shortly after August 2010, including this command.}
-
-The list of targets is numbered starting at zero.
-This command returns the name of the target at index @var{number}.
-@example
-set thename [target number $x]
-puts [format "Target %d is: %s\n" $x $thename]
-@end example
-@end deffn
-
 @c yep, "target list" would have been better.
 @c plus maybe "target setdefault".
 
@@ -5236,7 +5208,7 @@ supported.}
 @deffn {Flash Driver} lpc2000
 This is the driver to support internal flash of all members of the
 LPC11(x)00 and LPC1300 microcontroller families and most members of
-the LPC800, LPC1500, LPC1700, LPC1800, LPC2000, LPC4300 and LPC54100
+the LPC800, LPC1500, LPC1700, LPC1800, LPC2000, LPC4000 and LPC54100
 microcontroller families from NXP.
 
 @quotation Note
@@ -5253,15 +5225,16 @@ which must appear in the following order:
 @item @var{variant} ... required, may be
 @option{lpc2000_v1} (older LPC21xx and LPC22xx)
 @option{lpc2000_v2} (LPC213x, LPC214x, LPC210[123], LPC23xx and LPC24xx)
-@option{lpc1700} (LPC175x and LPC176x)
+@option{lpc1700} (LPC175x and LPC176x and LPC177x/8x)
 @option{lpc4300} - available also as @option{lpc1800} alias (LPC18x[2357] and
 LPC43x[2357])
 @option{lpc800} (LPC8xx)
 @option{lpc1100} (LPC11(x)xx and LPC13xx)
 @option{lpc1500} (LPC15xx)
 @option{lpc54100} (LPC541xx)
+@option{lpc4000} (LPC40xx)
 or @option{auto} - automatically detects flash variant and size for LPC11(x)00,
-LPC8xx, LPC13xx and LPC17xx
+LPC8xx, LPC13xx, LPC17xx and LPC40xx
 @item @var{clock_kHz} ... the frequency, in kiloHertz,
 at which the core is running
 @item @option{calc_checksum} ... optional (but you probably want to provide this!),
@@ -5495,11 +5468,10 @@ The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 
 @deffn {Flash Driver} stellaris
-All members of the Stellaris LM3Sxxx microcontroller family from
-Texas Instruments
-include internal flash and use ARM Cortex M3 cores.
-The driver automatically recognizes a number of these chips using
-the chip identification register, and autoconfigures itself.
+All members of the Stellaris LM3Sxxx, LM4x and Tiva C microcontroller
+families from Texas Instruments include internal flash. The driver
+automatically recognizes a number of these chips using the chip
+identification register, and autoconfigures itself.
 @footnote{Currently there is a @command{stellaris mass_erase} command.
 That seems pointless since the same effect can be had using the
 standard @command{flash erase_address} command.}
@@ -5508,12 +5480,12 @@ standard @command{flash erase_address} command.}
 flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME
 @end example
 
-@deffn Command {stellaris recover bank_id}
-Performs the @emph{Recovering a "Locked" Device} procedure to
-restore the flash specified by @var{bank_id} and its associated
-nonvolatile registers to their factory default values (erased).
-This is the only way to remove flash protection or re-enable
-debugging if that capability has been disabled.
+@deffn Command {stellaris recover}
+Performs the @emph{Recovering a "Locked" Device} procedure to restore
+the flash and its associated nonvolatile registers to their factory
+default values (erased). This is the only way to remove flash
+protection or re-enable debugging if that capability has been
+disabled.
 
 Note that the final "power cycle the chip" step in this procedure
 must be performed by hand, since OpenOCD can't do it.
@@ -8670,6 +8642,28 @@ Remember that most of the OpenOCD commands need to be prefixed with
 
 See @file{contrib/rpc_examples/} for specific client implementations.
 
+@section Tcl RPC server notifications
+@cindex RPC Notifications
+
+Notifications are sent asynchronously to other commands being executed over
+the RPC server, so the port must be polled continuously.
+
+Target event, state and reset notifications are emitted as Tcl associative arrays
+in the following format.
+
+@verbatim
+type target_event event [event-name]
+type target_state state [state-name]
+type target_reset mode [reset-mode]
+@end verbatim
+
+@deffn {Command} tcl_notifications [on/off]
+Toggle output of target notifications to the current Tcl RPC server.
+Only available from the Tcl RPC server.
+Defaults to off.
+
+@end deffn
+
 @node FAQ
 @chapter FAQ
 @cindex faq