cortex_a8: -Wshadow warning fixes

[openocd] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 5e703f1fa369e778fef473ca09c51236beea72bd..a3ca12475bca36eae98d6096d1816c7cca1f0598 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -537,7 +537,7 @@ command interpreter today is a mixture of (newer)
 JIM-Tcl commands, and (older) the orginal command interpreter.
 
 @item @b{Commands}
-@* At the OpenOCD telnet command line (or via the GDB mon command) one
+@* At the OpenOCD telnet command line (or via the GDB monitor command) one
 can type a Tcl for() loop, set variables, etc.
 Some of the commands documented in this guide are implemented
 as Tcl scripts, from a @file{startup.tcl} file internal to the server.
@@ -4672,6 +4672,26 @@ the flash clock.
 @end deffn
 @end deffn
 
+@deffn {Flash Driver} virtual
+This is a special driver that maps a previously defined bank to another
+address. All bank settings will be copied from the master physical bank.
+
+The @var{virtual} driver defines one mandatory parameters,
+
+@itemize
+@item @var{master_bank} The bank that this virtual address refers to.
+@end itemize
+
+So in the following example addresses 0xbfc00000 and 0x9fc00000 refer to
+the flash bank defined at address 0x1fc00000. Any cmds executed on
+the virtual banks are actually performed on the physical banks.
+@example
+flash bank $_FLASHNAME pic32mx 0x1fc00000 0 0 0 $_TARGETNAME
+flash bank vbank0 virtual 0xbfc00000 0 0 0 $_TARGETNAME $_FLASHNAME
+flash bank vbank1 virtual 0x9fc00000 0 0 0 $_TARGETNAME $_FLASHNAME
+@end example
+@end deffn
+
 @subsection str9xpec driver
 @cindex str9xpec