The resources in this chapter are available for developers wishing to explore
or expand the OpenOCD source code.
-@section OpenOCD Subversion Repository
+@section OpenOCD GIT Repository
-You can download the current SVN version with an SVN client of your
-choice from the following repositories:
+During the 0.3.x release cycle, OpenOCD switched from Subversion to
+a GIT repository hosted at SourceForge. The repository URL is:
- @uref{svn://svn.berlios.de/openocd/trunk}
+@uref{git://openocd.git.sourceforge.net/gitroot/openocd/openocd}
-or
+You may prefer to use a mirror and the HTTP protocol:
- @uref{http://svn.berlios.de/svnroot/repos/openocd/trunk}
+@uref{http://repo.or.cz/r/openocd.git}
-Using the SVN command line client, you can use the following command to
-fetch the latest version (make sure there is no (non-svn) directory
-called "openocd" in the current directory):
+With standard GIT tools, use @command{git clone} to initialize
+a local repository, and @command{git pull} to update it.
+There are also gitweb pages letting you browse the repository
+with a web browser, or download arbitrary snapshots without
+needing a GIT client:
- svn checkout svn://svn.berlios.de/openocd/trunk openocd
+@uref{http://openocd.git.sourceforge.net/git/gitweb.cgi?p=openocd/openocd}
-If you prefer GIT based tools, the @command{git-svn} package works too:
+@uref{http://repo.or.cz/w/openocd.git}
- git svn clone -s svn://svn.berlios.de/openocd
-
-The ``README'' file contains the instructions for building the project
-from the repository.
+The @file{README} file contains the instructions for building the project
+from the repository or a snapshot.
Developers that want to contribute patches to the OpenOCD system are
-@b{strongly} encouraged to base their work off of the most recent trunk
-revision. Patches created against older versions may require additional
+@b{strongly} encouraged to work against mainline.
+Patches created against older versions may require additional
work from their submitter in order to be updated for newer releases.
@section Doxygen Developer Manual
-During the development of the 0.2.0 release, the OpenOCD project began
+During the 0.2.x release cycle, the OpenOCD project began
providing a Doxygen reference manual. This document contains more
technical information about the software internals, development
processes, and similar documentation:
This document is a work-in-progress, but contributions would be welcome
to fill in the gaps. All of the source files are provided in-tree,
-listed in the Doxyfile configuration in the top of the repository trunk.
+listed in the Doxyfile configuration in the top of the source tree.
@section OpenOCD Developer Mailing List
@uref{https://lists.berlios.de/mailman/listinfo/openocd-development}
-All drivers developers are enouraged to also subscribe to the list of
-SVN commits to keep pace with the ongoing changes:
-
-@uref{https://lists.berlios.de/mailman/listinfo/openocd-svn}
+Discuss and submit patches to this list.
+The @file{PATCHES} file contains basic information about how
+to prepare patches.
@node JTAG Hardware Dongles
that the @code{reset-init} event handler does.
@item
-Likewise, the @command{arm9tdmi vector_catch} command (or
+Likewise, the @command{arm9 vector_catch} command (or
@cindex vector_catch
its siblings @command{xscale vector_catch}
and @command{cortex_m3 vector_catch}) can be a timesaver
You should find the following directories under @t{$(INSTALLDIR)/scripts},
with files including the ones listed here.
Use them as-is where you can; or as models for new files.
-
@itemize @bullet
@item @file{interface} ...
think JTAG Dongle. Files that configure JTAG adapters go here.
Because this is so very board-specific, and chip-specific, no examples
are included here.
Instead, look at the board config files distributed with OpenOCD.
-If you have a boot loader, its source code may also be useful.
+If you have a boot loader, its source code will help; so will
+configuration files for other JTAG tools
+(@pxref{Translating Configuration Files}).
@end quotation
Some of this code could probably be shared between different boards.
@item pxa270 - again - CS0 flash - it goes in the board file.
@end itemize
+@anchor{Translating Configuration Files}
+@section Translating Configuration Files
+@cindex translation
+If you have a configuration file for another hardware debugger
+or toolset (Abatron, BDI2000, BDI3000, CCS,
+Lauterbach, Segger, Macraigor, etc.), translating
+it into OpenOCD syntax is often quite straightforward. The most tricky
+part of creating a configuration script is oftentimes the reset init
+sequence where e.g. PLLs, DRAM and the like is set up.
+
+One trick that you can use when translating is to write small
+Tcl procedures to translate the syntax into OpenOCD syntax. This
+can avoid manual translation errors and make it easier to
+convert other scripts later on.
+
+Example of transforming quirky arguments to a simple search and
+replace job:
+
+@example
+# Lauterbach syntax(?)
+#
+# Data.Set c15:0x042f %long 0x40000015
+#
+# OpenOCD syntax when using procedure below.
+#
+# setc15 0x01 0x00050078
+
+proc setc15 @{regs value@} @{
+ global TARGETNAME
+
+ echo [format "set p15 0x%04x, 0x%08x" $regs $value]
+
+ arm11 mcr $TARGETNAME 15 [expr ($regs>>12)&0x7] \
+ [expr ($regs>>0)&0xf] [expr ($regs>>4)&0xf] \
+ [expr ($regs>>8)&0x7] $value
+@}
+@end example
+
+
+
@node Daemon Configuration
@chapter Daemon Configuration
@cindex initialization
the memory read/write commands. This includes @command{nand probe}.
@end deffn
+@deffn {Overridable Procedure} jtag_init
+This is invoked at server startup to verify that it can talk
+to the scan chain (list of TAPs) which has been configured.
+
+The default implementation first tries @command{jtag arp_init},
+which uses only a lightweight JTAG reset before examining the
+scan chain.
+If that fails, it tries again, using a harder reset
+from the overridable procedure @command{init_reset}.
+
+Implementations must have verified the JTAG scan chain before
+they return.
+This is done by calling @command{jtag arp_init}
+(or @command{jtag arp_init-reset}).
+@end deffn
+
@anchor{TCP/IP Ports}
@section TCP/IP Ports
@cindex TCP port
breakpoints if the memory map has been set up for flash regions.
@end deffn
-@deffn {Config Command} gdb_detach (@option{resume}|@option{reset}|@option{halt}|@option{nothing})
-Configures what OpenOCD will do when GDB detaches from the daemon.
-Default behaviour is @option{resume}.
-@end deffn
-
@anchor{gdb_flash_program}
@deffn {Config Command} gdb_flash_program (@option{enable}|@option{disable})
Set to @option{enable} to cause OpenOCD to program the flash memory when a
For example, certain JTAG commands might need to be issued while
the system as a whole is in a reset state (SRST active)
but the JTAG scan chain is usable (TRST inactive).
-(@xref{JTAG Commands}, where the @command{jtag_reset}
-command is presented.)
+Many systems treat combined assertion of SRST and TRST as a
+trigger for a harder reset than SRST alone.
+Such custom reset handling is discussed later in this chapter.
@end itemize
There can also be other issues.
@section Commands for Handling Resets
+@deffn {Command} jtag_nsrst_assert_width milliseconds
+Minimum amount of time (in milliseconds) OpenOCD should wait
+after asserting nSRST (active-low system reset) before
+allowing it to be deasserted.
+@end deffn
+
@deffn {Command} jtag_nsrst_delay milliseconds
How long (in milliseconds) OpenOCD should wait after deasserting
nSRST (active-low system reset) before starting new JTAG operations.
probably have hardware debouncing, implying you should use this.
@end deffn
+@deffn {Command} jtag_ntrst_assert_width milliseconds
+Minimum amount of time (in milliseconds) OpenOCD should wait
+after asserting nTRST (active-low JTAG TAP reset) before
+allowing it to be deasserted.
+@end deffn
+
@deffn {Command} jtag_ntrst_delay milliseconds
How long (in milliseconds) OpenOCD should wait after deasserting
nTRST (active-low JTAG TAP reset) before starting new JTAG operations.
@quotation Tip
If your board provides SRST and/or TRST through the JTAG connector,
-you must declare that or else those signals will not be used.
+you must declare that so those signals can be used.
@end quotation
@item
@end itemize
@end deffn
+@section Custom Reset Handling
+@cindex events
+
+OpenOCD has several ways to help support the various reset
+mechanisms provided by chip and board vendors.
+The commands shown in the previous section give standard parameters.
+There are also @emph{event handlers} associated with TAPs or Targets.
+Those handlers are Tcl procedures you can provide, which are invoked
+at particular points in the reset sequence.
+
+After configuring those mechanisms, you might still
+find your board doesn't start up or reset correctly.
+For example, maybe it needs a slightly different sequence
+of SRST and/or TRST manipulations, because of quirks that
+the @command{reset_config} mechanism doesn't address;
+or asserting both might trigger a stronger reset, which
+needs special attention.
+
+Experiment with lower level operations, such as @command{jtag_reset}
+and the @command{jtag arp_*} operations shown here,
+to find a sequence of operations that works.
+@xref{JTAG Commands}.
+When you find a working sequence, it can be used to override
+@command{jtag_init}, which fires during OpenOCD startup
+(@pxref{Configuration Stage});
+or @command{init_reset}, which fires during reset processing.
+
+You might also want to provide some project-specific reset
+schemes. For example, on a multi-target board the standard
+@command{reset} command would reset all targets, but you
+may need the ability to reset only one target at time and
+thus want to avoid using the board-wide SRST signal.
+
+@deffn {Overridable Procedure} init_reset mode
+This is invoked near the beginning of the @command{reset} command,
+usually to provide as much of a cold (power-up) reset as practical.
+By default it is also invoked from @command{jtag_init} if
+the scan chain does not respond to pure JTAG operations.
+The @var{mode} parameter is the parameter given to the
+low level reset command (@option{halt},
+@option{init}, or @option{run}), @option{setup},
+or potentially some other value.
+
+The default implementation just invokes @command{jtag arp_init-reset}.
+Replacements will normally build on low level JTAG
+operations such as @command{jtag_reset}.
+Operations here must not address individual TAPs
+(or their associated targets)
+until the JTAG scan chain has first been verified to work.
+
+Implementations must have verified the JTAG scan chain before
+they return.
+This is done by calling @command{jtag arp_init}
+(or @command{jtag arp_init-reset}).
+@end deffn
+
+@deffn Command {jtag arp_init}
+This validates the scan chain using just the four
+standard JTAG signals (TMS, TCK, TDI, TDO).
+It starts by issuing a JTAG-only reset.
+Then it performs checks to verify that the scan chain configuration
+matches the TAPs it can observe.
+Those checks include checking IDCODE values for each active TAP,
+and verifying the length of their instruction registers using
+TAP @code{-ircapture} and @code{-irmask} values.
+If these tests all pass, TAP @code{setup} events are
+issued to all TAPs with handlers for that event.
+@end deffn
+
+@deffn Command {jtag arp_init-reset}
+This uses TRST and SRST to try resetting
+everything on the JTAG scan chain
+(and anything else connected to SRST).
+It then invokes the logic of @command{jtag arp_init}.
+@end deffn
+
@node TAP Declaration
@chapter TAP Declaration
@section Other TAP commands
-@c @deffn Command {jtag arp_init-reset}
-@c ... more or less "toggle TRST ... and SRST too, what the heck"
-
@deffn Command {jtag cget} dotted.name @option{-event} name
@deffnx Command {jtag configure} dotted.name @option{-event} name string
At this writing this TAP attribute
@end ignore
@item @b{reset-assert-pre}
@* Issued as part of @command{reset} processing
-after SRST and/or TRST were activated and deactivated,
+after @command{reset_init} was triggered
but before SRST alone is re-asserted on the tap.
@item @b{reset-assert-post}
@* Issued as part of @command{reset} processing
the target clocks are fully set up.)
@item @b{reset-start}
@* Issued as part of @command{reset} processing
-before either SRST or TRST are activated.
+before @command{reset_init} is called.
-This is the most robust place to switch to a low JTAG clock rate, if
-SRST disables PLLs needed to use a fast clock.
+This is the most robust place to use @command{jtag_rclk}
+or @command{jtag_khz} to switch to a low JTAG clock rate,
+when reset disables PLLs needed to use a fast clock.
@ignore
@item @b{reset-wait-pos}
@* Currently not used
@end deffn
@anchor{flash write_image}
-@deffn Command {flash write_image} [erase] filename [offset] [type]
+@deffn Command {flash write_image} [erase] [unlock] filename [offset] [type]
Write the image @file{filename} to the current target's flash bank(s).
A relocation @var{offset} may be specified, in which case it is added
to the base address for each section in the image.
@option{elf} (ELF file), @option{s19} (Motorola s19).
@option{mem}, or @option{builder}.
The relevant flash sectors will be erased prior to programming
-if the @option{erase} parameter is given.
-The flash bank to use is inferred from the @var{address} of
+if the @option{erase} parameter is given. If @option{unlock} is
+provided, then the flash banks are unlocked before erase and
+program. The flash bank to use is inferred from the @var{address} of
each image segment.
@end deffn
about what TAP is the current target, or about MMU configuration.
@end enumerate
-@deffn Command mdw addr [count]
-@deffnx Command mdh addr [count]
-@deffnx Command mdb addr [count]
+@deffn Command mdw [phys] addr [count]
+@deffnx Command mdh [phys] addr [count]
+@deffnx Command mdb [phys] addr [count]
Display contents of address @var{addr}, as
32-bit words (@command{mdw}), 16-bit halfwords (@command{mdh}),
or 8-bit bytes (@command{mdb}).
If @var{count} is specified, displays that many units.
+@var{phys} is an optional flag to indicate to use
+physical address and bypass MMU
(If you want to manipulate the data instead of displaying it,
see the @code{mem2array} primitives.)
@end deffn
-@deffn Command mww addr word
-@deffnx Command mwh addr halfword
-@deffnx Command mwb addr byte
+@deffn Command mww [phys] addr word
+@deffnx Command mwh [phys] addr halfword
+@deffnx Command mwb [phys] addr byte
Writes the specified @var{word} (32 bits),
@var{halfword} (16 bits), or @var{byte} (8-bit) pattern,
at the specified address @var{addr}.
+@var{phys} is an optional flag to indicate to use
+physical address and bypass MMU
@end deffn
This is a software breakpoint, unless @option{hw} is specified
in which case it will be a hardware breakpoint.
-(@xref{arm9tdmi vector_catch}, or @pxref{xscale vector_catch},
+(@xref{arm9 vector_catch}, or @pxref{xscale vector_catch},
for similar mechanisms that do not consume hardware breakpoints.)
@end deffn
@quotation Issues
ETM support may be buggy, and at least some @command{etm config}
parameters should be detected by asking the ETM for them.
+
+ETM trigger events could also implement a kind of complex
+hardware breakpoint, much more powerful than the simple
+watchpoint hardware exported by EmbeddedICE modules.
+@emph{Such breakpoints can be triggered even when using the
+dummy trace port driver}.
+
It seems like a GDB hookup should be possible,
-as well as triggering trace on specific events
+as well as tracing only during specific states
(perhaps @emph{handling IRQ 23} or @emph{calls foo()}).
+
There should be GUI tools to manipulate saved trace data and help
analyse it in conjunction with the source code.
It's unclear how much of a common interface is shared
with the current XScale trace support, or should be
shared with eventual Nexus-style trace module support.
+
At this writing (September 2009) only ARM7 and ARM9 support
for ETM modules is available. The code should be able to
work with some newer cores; but not all of them support
Declares the ETM associated with @var{target}, and associates it
with a given trace port @var{driver}. @xref{Trace Port Drivers}.
-Several of the parameters must reflect the trace port configuration.
+Several of the parameters must reflect the trace port capabilities,
+which are a function of silicon capabilties (exposed later
+using @command{etm info}) and of what hardware is connected to
+that port (such as an external pod, or ETB).
The @var{width} must be either 4, 8, or 16.
The @var{mode} must be @option{normal}, @option{multiplexted},
or @option{demultiplexted}.
@deffn Command {etm info}
Displays information about the current target's ETM.
+This includes resource counts from the @code{ETM_CONFIG} register,
+as well as silicon capabilities (except on rather old modules).
+from the @code{ETM_SYS_CONFIG} register.
@end deffn
@deffn Command {etm status}
else if a @var{value} is provided, that value is written to that register.
@end deffn
-@deffn Command {arm720t mdw_phys} addr [count]
-@deffnx Command {arm720t mdh_phys} addr [count]
-@deffnx Command {arm720t mdb_phys} addr [count]
-Display contents of physical address @var{addr}, as
-32-bit words (@command{mdw_phys}), 16-bit halfwords (@command{mdh_phys}),
-or 8-bit bytes (@command{mdb_phys}).
-If @var{count} is specified, displays that many units.
-@end deffn
-
-@deffn Command {arm720t mww_phys} addr word
-@deffnx Command {arm720t mwh_phys} addr halfword
-@deffnx Command {arm720t mwb_phys} addr byte
-Writes the specified @var{word} (32 bits),
-@var{halfword} (16 bits), or @var{byte} (8-bit) pattern,
-at the specified physical address @var{addr}.
-@end deffn
-
-@deffn Command {arm720t virt2phys} va
-Translate a virtual address @var{va} to a physical address
-and display the result.
-@end deffn
-
@subsection ARM9 specific commands
@cindex ARM9
integer processors.
Such cores include the ARM920T, ARM926EJ-S, and ARM966.
-For historical reasons, one command shared by these cores starts
-with the @command{arm9tdmi} prefix.
-This is true even for ARM9E based processors, which implement the
-ARMv5TE architecture instead of ARMv4T.
-
@c 9-june-2009: tried this on arm920t, it didn't work.
@c no-params always lists nothing caught, and that's how it acts.
+@c 23-oct-2009: doesn't work _consistently_ ... as if the ICE
+@c versions have different rules about when they commit writes.
-@anchor{arm9tdmi vector_catch}
-@deffn Command {arm9tdmi vector_catch} [@option{all}|@option{none}|list]
+@anchor{arm9 vector_catch}
+@deffn Command {arm9 vector_catch} [@option{all}|@option{none}|list]
@cindex vector_catch
Vector Catch hardware provides a sort of dedicated breakpoint
for hardware events such as reset, interrupt, and abort.
@option{all} of the hardware vectors,
@option{none} of them,
or a list with one or more of the following:
-@option{reset} @option{undef} @option{swi} @option{pabt} @option{dabt} @option{reserved}
+@option{reset} @option{undef} @option{swi} @option{pabt} @option{dabt}
@option{irq} @option{fiq}.
@end deffn
or using zero if no other address is not provided.
@end deffn
-@deffn Command {arm920t mdw_phys} addr [count]
-@deffnx Command {arm920t mdh_phys} addr [count]
-@deffnx Command {arm920t mdb_phys} addr [count]
-Display contents of physical address @var{addr}, as
-32-bit words (@command{mdw_phys}), 16-bit halfwords (@command{mdh_phys}),
-or 8-bit bytes (@command{mdb_phys}).
-If @var{count} is specified, displays that many units.
-@end deffn
-
-@deffn Command {arm920t mww_phys} addr word
-@deffnx Command {arm920t mwh_phys} addr halfword
-@deffnx Command {arm920t mwb_phys} addr byte
-Writes the specified @var{word} (32 bits),
-@var{halfword} (16 bits), or @var{byte} (8-bit) pattern,
-at the specified physical address @var{addr}.
-@end deffn
-
@deffn Command {arm920t read_cache} filename
Dump the content of ICache and DCache to a file named @file{filename}.
@end deffn
Dump the content of the ITLB and DTLB to a file named @file{filename}.
@end deffn
-@deffn Command {arm920t virt2phys} va
-Translate a virtual address @var{va} to a physical address
-and display the result.
-@end deffn
-
@subsection ARM926ej-s specific commands
@cindex ARM926ej-s
Else that register is read and displayed.
@end deffn
-@deffn Command {arm926ejs mdw_phys} addr [count]
-@deffnx Command {arm926ejs mdh_phys} addr [count]
-@deffnx Command {arm926ejs mdb_phys} addr [count]
-Display contents of physical address @var{addr}, as
-32-bit words (@command{mdw_phys}), 16-bit halfwords (@command{mdh_phys}),
-or 8-bit bytes (@command{mdb_phys}).
-If @var{count} is specified, displays that many units.
-@end deffn
-
-@deffn Command {arm926ejs mww_phys} addr word
-@deffnx Command {arm926ejs mwh_phys} addr halfword
-@deffnx Command {arm926ejs mwb_phys} addr byte
-Writes the specified @var{word} (32 bits),
-@var{halfword} (16 bits), or @var{byte} (8-bit) pattern,
-at the specified physical address @var{addr}.
-@end deffn
-
-@deffn Command {arm926ejs virt2phys} va
-Translate a virtual address @var{va} to a physical address
-and display the result.
-@end deffn
-
@subsection ARM966E specific commands
@cindex ARM966E
@deffn Command {arm11 memwrite burst} [value]
Displays the value of the memwrite burst-enable flag,
-which is enabled by default.
+which is enabled by default. Burst writes are only used
+for memory writes larger than 1 word. Single word writes
+are likely to be from reset init scripts and those writes
+are often to non-memory locations which could easily have
+many wait states, which could easily break burst writes.
If @var{value} is defined, first assigns that.
@end deffn
Displays the result.
@end deffn
-@deffn Command {arm11 no_increment} [value]
-Displays the value of the flag controlling whether
-some read or write operations increment the pointer
-(the default behavior) or not (acting like a FIFO).
-If @var{value} is defined, first assigns that.
-@end deffn
-
@deffn Command {arm11 step_irq_enable} [value]
Displays the value of the flag controlling whether
IRQs are enabled during single stepping;
to configure how the board and JTAG adapter treat these two
signals, and to say if either signal is even present.
@xref{Reset Configuration}.
+
+Note that TRST is specially handled.
+It actually signifies JTAG's @sc{reset} state.
+So if the board doesn't support the optional TRST signal,
+or it doesn't support it along with the specified SRST value,
+JTAG reset is triggered with TMS and TCK signals
+instead of the TRST signal.
+And no matter how that JTAG reset is triggered, once
+the scan chain enters @sc{reset} with TRST inactive,
+TAP @code{post-reset} events are delivered to all TAPs
+with handlers for that event.
+@end deffn
+
+@deffn Command {pathmove} start_state [next_state ...]
+Start by moving to @var{start_state}, which
+must be one of the @emph{stable} states.
+Unless it is the only state given, this will often be the
+current state, so that no TCK transitions are needed.
+Then, in a series of single state transitions
+(conforming to the JTAG state machine) shift to
+each @var{next_state} in sequence, one per TCK cycle.
+The final state must also be stable.
@end deffn
@deffn Command {runtest} @var{num_cycles}
@cindex TAP state names
The @var{tap_state} names used by OpenOCD in the @command{drscan},
-and @command{irscan} commands are:
+@command{irscan}, and @command{pathmove} commands are the same
+as those used in SVF boundary scan documents, except that
+SVF uses @sc{idle} instead of @sc{run/idle}.
@itemize @bullet
-@item @b{RESET} ... should act as if TRST were active
-@item @b{RUN/IDLE} ... don't assume this always means IDLE
+@item @b{RESET} ... @emph{stable} (with TMS high);
+acts as if TRST were pulsed
+@item @b{RUN/IDLE} ... @emph{stable}; don't assume this always means IDLE
@item @b{DRSELECT}
@item @b{DRCAPTURE}
-@item @b{DRSHIFT} ... TDI/TDO shifting through the data register
+@item @b{DRSHIFT} ... @emph{stable}; TDI/TDO shifting
+through the data register
@item @b{DREXIT1}
-@item @b{DRPAUSE} ... data register ready for update or more shifting
+@item @b{DRPAUSE} ... @emph{stable}; data register ready
+for update or more shifting
@item @b{DREXIT2}
@item @b{DRUPDATE}
@item @b{IRSELECT}
@item @b{IRCAPTURE}
-@item @b{IRSHIFT} ... TDI/TDO shifting through the instruction register
+@item @b{IRSHIFT} ... @emph{stable}; TDI/TDO shifting
+through the instruction register
@item @b{IREXIT1}
-@item @b{IRPAUSE} ... instruction register ready for update or more shifting
+@item @b{IRPAUSE} ... @emph{stable}; instruction register ready
+for update or more shifting
@item @b{IREXIT2}
@item @b{IRUPDATE}
@end itemize
@item @sc{run/idle}, @sc{drpause}, and @sc{irpause} are reasonable
choices after @command{drscan} or @command{irscan} commands,
since they are free of JTAG side effects.
-However, @sc{run/idle} may have side effects that appear at other
+@item @sc{run/idle} may have side effects that appear at non-JTAG
levels, such as advancing the ARM9E-S instruction pipeline.
Consult the documentation for the TAP(s) you are working with.
@end itemize
messages are logged for comments and some retries.
@end deffn
+The OpenOCD sources also include two utility scripts
+for working with XSVF; they are not currently installed
+after building the software.
+You may find them useful:
+
+@itemize
+@item @emph{svf2xsvf} ... converts SVF files into the extended XSVF
+syntax understood by the @command{xsvf} command; see notes below.
+@item @emph{xsvfdump} ... converts XSVF files into a text output format;
+understands the OpenOCD extensions.
+@end itemize
+
+The input format accepts a handful of non-standard extensions.
+These include three opcodes corresponding to SVF extensions
+from Lattice Semiconductor (LCOUNT, LDELAY, LDSR), and
+two opcodes supporting a more accurate translation of SVF
+(XTRST, XWAITSTATE).
+If @emph{xsvfdump} shows a file is using those opcodes, it
+probably will not be usable with other XSVF tools.
+
+
@node TFTP
@chapter TFTP
@cindex TFTP
projects / openocd / blobdiff