that the @code{reset-init} event handler does.
@item
-Likewise, the @command{arm9tdmi vector_catch} command (or
+Likewise, the @command{arm9 vector_catch} command (or
@cindex vector_catch
its siblings @command{xscale vector_catch}
and @command{cortex_m3 vector_catch}) can be a timesaver
This is a software breakpoint, unless @option{hw} is specified
in which case it will be a hardware breakpoint.
-(@xref{arm9tdmi vector_catch}, or @pxref{xscale vector_catch},
+(@xref{arm9 vector_catch}, or @pxref{xscale vector_catch},
for similar mechanisms that do not consume hardware breakpoints.)
@end deffn
@quotation Issues
ETM support may be buggy, and at least some @command{etm config}
parameters should be detected by asking the ETM for them.
+
+ETM trigger events could also implement a kind of complex
+hardware breakpoint, much more powerful than the simple
+watchpoint hardware exported by EmbeddedICE modules.
+@emph{Such breakpoints can be triggered even when using the
+dummy trace port driver}.
+
It seems like a GDB hookup should be possible,
-as well as triggering trace on specific events
+as well as tracing only during specific states
(perhaps @emph{handling IRQ 23} or @emph{calls foo()}).
+
There should be GUI tools to manipulate saved trace data and help
analyse it in conjunction with the source code.
It's unclear how much of a common interface is shared
with the current XScale trace support, or should be
shared with eventual Nexus-style trace module support.
+
At this writing (September 2009) only ARM7 and ARM9 support
for ETM modules is available. The code should be able to
work with some newer cores; but not all of them support
Declares the ETM associated with @var{target}, and associates it
with a given trace port @var{driver}. @xref{Trace Port Drivers}.
-Several of the parameters must reflect the trace port configuration.
+Several of the parameters must reflect the trace port capabilities,
+which are a function of silicon capabilties (exposed later
+using @command{etm info}) and of what hardware is connected to
+that port (such as an external pod, or ETB).
The @var{width} must be either 4, 8, or 16.
The @var{mode} must be @option{normal}, @option{multiplexted},
or @option{demultiplexted}.
@deffn Command {etm info}
Displays information about the current target's ETM.
+This includes resource counts from the @code{ETM_CONFIG} register,
+as well as silicon capabilities (except on rather old modules).
+from the @code{ETM_SYS_CONFIG} register.
@end deffn
@deffn Command {etm status}
else if a @var{value} is provided, that value is written to that register.
@end deffn
-@deffn Command {arm720t mdw_phys} addr [count]
-@deffnx Command {arm720t mdh_phys} addr [count]
-@deffnx Command {arm720t mdb_phys} addr [count]
-Display contents of physical address @var{addr}, as
-32-bit words (@command{mdw_phys}), 16-bit halfwords (@command{mdh_phys}),
-or 8-bit bytes (@command{mdb_phys}).
-If @var{count} is specified, displays that many units.
-@end deffn
-
-@deffn Command {arm720t mww_phys} addr word
-@deffnx Command {arm720t mwh_phys} addr halfword
-@deffnx Command {arm720t mwb_phys} addr byte
-Writes the specified @var{word} (32 bits),
-@var{halfword} (16 bits), or @var{byte} (8-bit) pattern,
-at the specified physical address @var{addr}.
-@end deffn
-
@subsection ARM9 specific commands
@cindex ARM9
integer processors.
Such cores include the ARM920T, ARM926EJ-S, and ARM966.
-For historical reasons, one command shared by these cores starts
-with the @command{arm9tdmi} prefix.
-This is true even for ARM9E based processors, which implement the
-ARMv5TE architecture instead of ARMv4T.
-
@c 9-june-2009: tried this on arm920t, it didn't work.
@c no-params always lists nothing caught, and that's how it acts.
+@c 23-oct-2009: doesn't work _consistently_ ... as if the ICE
+@c versions have different rules about when they commit writes.
-@anchor{arm9tdmi vector_catch}
-@deffn Command {arm9tdmi vector_catch} [@option{all}|@option{none}|list]
+@anchor{arm9 vector_catch}
+@deffn Command {arm9 vector_catch} [@option{all}|@option{none}|list]
@cindex vector_catch
Vector Catch hardware provides a sort of dedicated breakpoint
for hardware events such as reset, interrupt, and abort.
@option{all} of the hardware vectors,
@option{none} of them,
or a list with one or more of the following:
-@option{reset} @option{undef} @option{swi} @option{pabt} @option{dabt} @option{reserved}
+@option{reset} @option{undef} @option{swi} @option{pabt} @option{dabt}
@option{irq} @option{fiq}.
@end deffn
or using zero if no other address is not provided.
@end deffn
-@deffn Command {arm920t mdw_phys} addr [count]
-@deffnx Command {arm920t mdh_phys} addr [count]
-@deffnx Command {arm920t mdb_phys} addr [count]
-Display contents of physical address @var{addr}, as
-32-bit words (@command{mdw_phys}), 16-bit halfwords (@command{mdh_phys}),
-or 8-bit bytes (@command{mdb_phys}).
-If @var{count} is specified, displays that many units.
-@end deffn
-
-@deffn Command {arm920t mww_phys} addr word
-@deffnx Command {arm920t mwh_phys} addr halfword
-@deffnx Command {arm920t mwb_phys} addr byte
-Writes the specified @var{word} (32 bits),
-@var{halfword} (16 bits), or @var{byte} (8-bit) pattern,
-at the specified physical address @var{addr}.
-@end deffn
-
@deffn Command {arm920t read_cache} filename
Dump the content of ICache and DCache to a file named @file{filename}.
@end deffn
Else that register is read and displayed.
@end deffn
-@deffn Command {arm926ejs mdw_phys} addr [count]
-@deffnx Command {arm926ejs mdh_phys} addr [count]
-@deffnx Command {arm926ejs mdb_phys} addr [count]
-Display contents of physical address @var{addr}, as
-32-bit words (@command{mdw_phys}), 16-bit halfwords (@command{mdh_phys}),
-or 8-bit bytes (@command{mdb_phys}).
-If @var{count} is specified, displays that many units.
-@end deffn
-
-@deffn Command {arm926ejs mww_phys} addr word
-@deffnx Command {arm926ejs mwh_phys} addr halfword
-@deffnx Command {arm926ejs mwb_phys} addr byte
-Writes the specified @var{word} (32 bits),
-@var{halfword} (16 bits), or @var{byte} (8-bit) pattern,
-at the specified physical address @var{addr}.
-@end deffn
-
@subsection ARM966E specific commands
@cindex ARM966E
projects / openocd / blobdiff