clk: Add Actions Semi OWL clock support

[u-boot] / doc / uImage.FIT / kernel.its

diff --git a/doc/uImage.FIT/kernel.its b/doc/uImage.FIT/kernel.its
index 539cdbfafec0d8f63d3cd298323525f2f3e04cb7..77ddf622deb84da04e3be6859da884496b39d6a5 100644 (file)
--- a/doc/uImage.FIT/kernel.its
+++ b/doc/uImage.FIT/kernel.its
@@ -1,5 +1,5 @@
 /*
- * Simple U-boot uImage source file containing a single kernel
+ * Simple U-Boot uImage source file containing a single kernel
  */
 
 /dts-v1/;
@@ -9,7 +9,7 @@
        #address-cells = <1>;
 
        images {
-               kernel@1 {
+               kernel {
                        description = "Vanilla Linux kernel";
                        data = /incbin/("./vmlinux.bin.gz");
                        type = "kernel";
@@ -18,20 +18,20 @@
                        compression = "gzip";
                        load = <00000000>;
                        entry = <00000000>;
-                       hash@1 {
+                       hash-1 {
                                algo = "crc32";
                        };
-                       hash@2 {
+                       hash-2 {
                                algo = "sha1";
                        };
                };
        };
 
        configurations {
-               default = "config@1";
-               config@1 {
+               default = "config-1";
+               config-1 {
                        description = "Boot Linux kernel";
-                       kernel = "kernel@1";
+                       kernel = "kernel";
                };
        };
 };
@@ -47,7 +47,7 @@ For x86 a setup node is also required: see x86-fit-boot.txt.
        #address-cells = <1>;
 
        images {
-               kernel@1 {
+               kernel {
                        description = "Vanilla Linux kernel";
                        data = /incbin/("./image.bin.lzo");
                        type = "kernel";
@@ -56,12 +56,12 @@ For x86 a setup node is also required: see x86-fit-boot.txt.
                        compression = "lzo";
                        load = <0x01000000>;
                        entry = <0x00000000>;
-                       hash@2 {
+                       hash-2 {
                                algo = "sha1";
                        };
                };
 
-               setup@1 {
+               setup {
                        description = "Linux setup.bin";
                        data = /incbin/("./setup.bin");
                        type = "x86_setup";
@@ -70,18 +70,22 @@ For x86 a setup node is also required: see x86-fit-boot.txt.
                        compression = "none";
                        load = <0x00090000>;
                        entry = <0x00090000>;
-                       hash@2 {
+                       hash-2 {
                                algo = "sha1";
                        };
                };
        };
 
        configurations {
-               default = "config@1";
-               config@1 {
+               default = "config-1";
+               config-1 {
                        description = "Boot Linux kernel";
-                       kernel = "kernel@1";
-                       setup = "setup@1";
+                       kernel = "kernel";
+                       setup = "setup";
                };
        };
 };
+
+Note: the above assumes a 32-bit kernel. To directly boot a 64-bit kernel,
+change both arch values to "x86_64". U-Boot will then change to 64-bit mode
+before booting the kernel (see boot_linux_kernel()).