* part of eCos, the Embedded Configurable Operating System.
* Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#define REG2OFF(reg) ((((uint32_t)reg) & 0x3) * 8)
static void set_ata_bus_timing(unsigned char mode)
{
- uint32_t val;
uint32_t T = 1000000000 / mxc_get_clock(MXC_IPG_CLK);
struct mxc_ata_config_regs *ata_regs;
return;
/* Write TIME_OFF/ON/1/2W */
- val = (3 << REG2OFF(&ata_regs->time_off)) |
- (3 << REG2OFF(&ata_regs->time_on)) |
- (((pio_t1[mode] + T) / T) << REG2OFF(&ata_regs->time_1)) |
- (((pio_t2_8[mode] + T) / T) << REG2OFF(&ata_regs->time_2w));
- writel(val, &ata_regs->time_off);
+ writeb(3, &ata_regs->time_off);
+ writeb(3, &ata_regs->time_on);
+ writeb((pio_t1[mode] + T) / T, &ata_regs->time_1);
+ writeb((pio_t2_8[mode] + T) / T, &ata_regs->time_2w);
/* Write TIME_2R/AX/RDX/4 */
- val = (((pio_t2_8[mode] + T) / T) << REG2OFF(&ata_regs->time_2r)) |
- (((pio_tA[mode] + T) / T + 2) << REG2OFF(&ata_regs->time_ax)) |
- (1 << REG2OFF(&ata_regs->time_pio_rdx)) |
- (((pio_t4[mode] + T) / T) << REG2OFF(&ata_regs->time_4));
- writel(val, &ata_regs->time_2r);
+ writeb((pio_t2_8[mode] + T) / T, &ata_regs->time_2r);
+ writeb((pio_tA[mode] + T) / T + 2, &ata_regs->time_ax);
+ writeb(1, &ata_regs->time_pio_rdx);
+ writeb((pio_t4[mode] + T) / T, &ata_regs->time_4);
/* Write TIME_9 ; the rest of timing registers is irrelevant for PIO */
- val = (((pio_t9[mode] + T) / T) << REG2OFF(&ata_regs->time_9));
- writel(val, &ata_regs->time_9);
+ writeb((pio_t9[mode] + T) / T, &ata_regs->time_9);
}
int ide_preinit(void)