Merge git://git.denx.de/u-boot-rockchip

[u-boot] / drivers / gpio / Kconfig

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 63951e0dbead9e444e7310d55b0baf8b95014640..b121979dddd7c42743b0e415513dba68a9111b13 100644 (file)
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -80,6 +80,13 @@ config IMX_RGPIO2P
        help
          This driver supports i.MX7ULP Rapid GPIO2P controller.
 
+config HSDK_CREG_GPIO
+       bool "HSDK CREG GPIO griver"
+       depends on DM_GPIO
+       default n
+       help
+         This driver supports CREG GPIOs on Synopsys HSDK SOC.
+
 config LPC32XX_GPIO
        bool "LPC32XX GPIO driver"
        depends on DM
@@ -109,6 +116,15 @@ config OMAP_GPIO
          Support GPIO controllers on the TI OMAP3/4/5 and related (such as
          AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs.
 
+config CMD_PCA953X
+       bool "Enable the pca953x command"
+       help
+         Deprecated: This should be converted to driver model.
+
+         This command provides access to a pca953x GPIO device using the
+         legacy GPIO interface. Several subcommands are provided which mirror
+         the standard 'gpio' command. It should use that instead.
+
 config PM8916_GPIO
        bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
        depends on DM_GPIO && PMIC_PM8916
@@ -126,6 +142,12 @@ config PCF8575_GPIO
         Support for PCF8575 I2C 16-bit GPIO expander. Most of these
         chips are from NXP and TI.
 
+config RCAR_GPIO
+       bool "Renesas RCar GPIO driver"
+       depends on DM_GPIO && ARCH_RMOBILE
+       help
+         This driver supports the GPIO banks on Renesas RCar SoCs.
+
 config ROCKCHIP_GPIO
        bool "Rockchip GPIO driver"
        depends on DM_GPIO
@@ -156,6 +178,15 @@ config SANDBOX_GPIO_COUNT
          of 'anonymous' GPIOs that do not belong to any device or bank.
          Select a suitable value depending on your needs.
 
+config CMD_TCA642X
+       bool "tca642x - Command to access tca642x state"
+       help
+         DEPRECATED - This needs conversion to driver model
+
+         This provides a way to looking at the pin state of this device.
+         This mirrors the 'gpio' command and that should be used in preference
+         to custom code.
+
 config TEGRA_GPIO
        bool "Tegra20..210 GPIO driver"
        depends on DM_GPIO
@@ -245,11 +276,11 @@ config DM_PCA953X
          Now, max 24 bits chips and PCA953X compatible chips are
          supported
 
-config MPC85XX_GPIO
-       bool "Freescale MPC85XX GPIO driver"
+config MPC8XXX_GPIO
+       bool "Freescale MPC8XXX GPIO driver"
        depends on DM_GPIO
        help
-         This driver supports the built-in GPIO controller of MPC85XX CPUs.
+         This driver supports the built-in GPIO controller of MPC8XXX CPUs.
          Each GPIO bank is identified by its own entry in the device tree,
          i.e.
 
@@ -267,7 +298,4 @@ config MPC85XX_GPIO
          Aside from the standard functions of input/output mode, and output
          value setting, the open-drain feature, which can configure individual
          GPIOs to work as open-drain outputs, is supported.
-
-         The driver has been tested on MPC85XX, but it is likely that other
-         PowerQUICC III devices will work as well.
 endmenu