Merge git://git.denx.de/u-boot-rockchip

[u-boot] / drivers / gpio / Kconfig

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index ffeda9425af13f07b10487e4a3110abff51d562e..b121979dddd7c42743b0e415513dba68a9111b13 100644 (file)
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -80,6 +80,13 @@ config IMX_RGPIO2P
        help
          This driver supports i.MX7ULP Rapid GPIO2P controller.
 
+config HSDK_CREG_GPIO
+       bool "HSDK CREG GPIO griver"
+       depends on DM_GPIO
+       default n
+       help
+         This driver supports CREG GPIOs on Synopsys HSDK SOC.
+
 config LPC32XX_GPIO
        bool "LPC32XX GPIO driver"
        depends on DM
@@ -135,6 +142,12 @@ config PCF8575_GPIO
         Support for PCF8575 I2C 16-bit GPIO expander. Most of these
         chips are from NXP and TI.
 
+config RCAR_GPIO
+       bool "Renesas RCar GPIO driver"
+       depends on DM_GPIO && ARCH_RMOBILE
+       help
+         This driver supports the GPIO banks on Renesas RCar SoCs.
+
 config ROCKCHIP_GPIO
        bool "Rockchip GPIO driver"
        depends on DM_GPIO
@@ -263,11 +276,11 @@ config DM_PCA953X
          Now, max 24 bits chips and PCA953X compatible chips are
          supported
 
-config MPC85XX_GPIO
-       bool "Freescale MPC85XX GPIO driver"
+config MPC8XXX_GPIO
+       bool "Freescale MPC8XXX GPIO driver"
        depends on DM_GPIO
        help
-         This driver supports the built-in GPIO controller of MPC85XX CPUs.
+         This driver supports the built-in GPIO controller of MPC8XXX CPUs.
          Each GPIO bank is identified by its own entry in the device tree,
          i.e.
 
@@ -285,7 +298,4 @@ config MPC85XX_GPIO
          Aside from the standard functions of input/output mode, and output
          value setting, the open-drain feature, which can configure individual
          GPIOs to work as open-drain outputs, is supported.
-
-         The driver has been tested on MPC85XX, but it is likely that other
-         PowerQUICC III devices will work as well.
 endmenu