i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ

[u-boot] / drivers / i2c / Kconfig

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 720e82d5ded11fce156d6ca73c8bcabb8fa304c6..1c8b8f7b3e1f77dd652e745920846eda95c38c79 100644 (file)
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -137,6 +137,17 @@ config SYS_I2C_IMX_LPI2C
        help
          Add support for the NXP i.MX LPI2C driver.
 
+config SYS_I2C_MESON
+       bool "Amlogic Meson I2C driver"
+       depends on DM_I2C && ARCH_MESON
+       help
+         Add support for the I2C controller available in Amlogic Meson
+         SoCs. The controller supports programmable bus speed including
+         standard (100kbits/s) and fast (400kbit/s) speed and allows the
+         software to define a flexible format of the bit streams. It has an
+         internal buffer holding up to 8 bytes for transfers and supports
+         both 7-bit and 10-bit addresses.
+
 config SYS_I2C_MXC
        bool "NXP i.MX I2C driver"
        depends on MX6
@@ -151,6 +162,26 @@ config SYS_I2C_OMAP24XX
        help
          Add support for the OMAP2+ I2C driver.
 
+if SYS_I2C_OMAP24XX
+config SYS_OMAP24_I2C_SLAVE
+       int "I2C Slave addr channel 0"
+       default 1
+       help
+         OMAP24xx I2C Slave address channel 0
+
+config SYS_OMAP24_I2C_SPEED
+       int "I2C Slave channel 0 speed"
+       default 100000
+       help
+         OMAP24xx Slave speed channel 0
+endif
+
+config SYS_I2C_RCAR_IIC
+       bool "Renesas RCar Gen3 IIC driver"
+       depends on (RCAR_GEN3 || RCAR_GEN2) && DM_I2C
+       help
+         Support for Renesas RCar Gen3 IIC controller.
+
 config SYS_I2C_ROCKCHIP
        bool "Rockchip I2C driver"
        depends on DM_I2C
@@ -174,6 +205,26 @@ config SYS_I2C_S3C24X0
        help
          Support for Samsung I2C controller as Samsung SoCs.
 
+config SYS_I2C_STM32F7
+       bool "STMicroelectronics STM32F7 I2C support"
+       depends on (STM32F7 || STM32H7) && DM_I2C
+       help
+         Enable this option to add support for STM32 I2C controller
+         introduced with STM32F7/H7 SoCs. This I2C controller supports :
+          _ Slave and master modes
+          _ Multimaster capability
+          _ Standard-mode (up to 100 kHz)
+          _ Fast-mode (up to 400 kHz)
+          _ Fast-mode Plus (up to 1 MHz)
+          _ 7-bit and 10-bit addressing mode
+          _ Multiple 7-bit slave addresses (2 addresses, 1 with configurable mask)
+          _ All 7-bit addresses acknowledge mode
+          _ General call
+          _ Programmable setup and hold times
+          _ Easy to use event management
+          _ Optional clock stretching
+          _ Software reset
+
 config SYS_I2C_UNIPHIER
        bool "UniPhier I2C driver"
        depends on ARCH_UNIPHIER && DM_I2C
@@ -207,6 +258,28 @@ config TEGRA186_BPMP_I2C
          by the BPMP, and can only be accessed by the main CPU via IPC
          requests to the BPMP. This driver covers the latter case.
 
+config SYS_I2C_BUS_MAX
+       int "Max I2C busses"
+       depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_SOCFPGA
+       default 2 if TI816X
+       default 3 if OMAP34XX || AM33XX || AM43XX || ARCH_KEYSTONE
+       default 4 if ARCH_SOCFPGA || OMAP44XX || TI814X
+       default 5 if OMAP54XX
+       help
+         Define the maximum number of available I2C buses.
+
+config SYS_I2C_ZYNQ
+       bool "Xilinx I2C driver"
+       depends on ARCH_ZYNQMP || ARCH_ZYNQ
+       help
+         Support for Xilinx I2C controller.
+
+config SYS_I2C_IHS
+        bool "gdsys IHS I2C driver"
+        depends on DM_I2C
+        help
+          Support for gdsys IHS I2C driver on FPGA bus.
+
 source "drivers/i2c/muxes/Kconfig"
 
 endmenu