Merge branch 'master' of http://git.denx.de/u-boot-sunxi

[u-boot] / drivers / i2c / Kconfig

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index ba43019ab99afd15d3086432f8861b5462a7b819..b3e84052ebbf10b46e986cd1144c91b08c04c5ac 100644 (file)
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -1,3 +1,9 @@
+#
+# I2C subsystem configuration
+#
+
+menu "I2C support"
+
 config DM_I2C
        bool "Enable Driver Model for I2C drivers"
        depends on DM
@@ -19,6 +25,30 @@ config DM_I2C_COMPAT
          to convert all code for a board in a single commit. It should not
          be enabled for any board in an official release.
 
+config I2C_CROS_EC_TUNNEL
+       tristate "Chrome OS EC tunnel I2C bus"
+       depends on CROS_EC
+       help
+         This provides an I2C bus that will tunnel i2c commands through to
+         the other side of the Chrome OS EC to the I2C bus connected there.
+         This will work whatever the interface used to talk to the EC (SPI,
+         I2C or LPC). Some Chromebooks use this when the hardware design
+         does not allow direct access to the main PMIC from the AP.
+
+config I2C_CROS_EC_LDO
+       bool "Provide access to LDOs on the Chrome OS EC"
+       depends on CROS_EC
+       ---help---
+       On many Chromebooks the main PMIC is inaccessible to the AP. This is
+       often dealt with by using an I2C pass-through interface provided by
+       the EC. On some unfortunate models (e.g. Spring) the pass-through
+       is not available, and an LDO message is available instead. This
+       option enables a driver which provides very basic access to those
+       regulators, via the EC. We implement this as an I2C bus which
+       emulates just the TPS65090 messages we know about. This is done to
+       avoid duplicating the logic in the TPS65090 regulator driver for
+       enabling/disabling an LDO.
+
 config DM_I2C_GPIO
        bool "Enable Driver Model for software emulated I2C bus driver"
        depends on DM_I2C && DM_GPIO
@@ -28,6 +58,56 @@ config DM_I2C_GPIO
          bindings are supported.
          Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt
 
+config SYS_I2C_FSL
+       bool "Freescale I2C bus driver"
+       depends on DM_I2C
+       help
+         Add support for Freescale I2C busses as used on MPC8240, MPC8245, and
+         MPC85xx processors.
+
+config SYS_I2C_CADENCE
+       tristate "Cadence I2C Controller"
+       depends on DM_I2C && (ARCH_ZYNQ || ARM64)
+       help
+         Say yes here to select Cadence I2C Host Controller. This controller is
+         e.g. used by Xilinx Zynq.
+
+config SYS_I2C_DW
+       bool "Designware I2C Controller"
+       default n
+       help
+         Say yes here to select the Designware I2C Host Controller. This
+         controller is used in various SoCs, e.g. the ST SPEAr, Altera
+         SoCFPGA, Synopsys ARC700 and some Intel x86 SoCs.
+
+config SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED
+       bool "DW I2C Enable Status Register not supported"
+       depends on SYS_I2C_DW && (TARGET_SPEAR300 || TARGET_SPEAR310 || \
+               TARGET_SPEAR320 || TARGET_SPEAR600 || TARGET_X600)
+       default y
+       help
+         Some versions of the Designware I2C controller do not support the
+         enable status register. This config option can be enabled in such
+         cases.
+
+config SYS_I2C_INTEL
+       bool "Intel I2C/SMBUS driver"
+       depends on DM_I2C
+       help
+         Add support for the Intel SMBUS driver. So far this driver is just
+         a stub which perhaps some basic init. There is no implementation of
+         the I2C API meaning that any I2C operations will immediately fail
+         for now.
+
+config SYS_I2C_ROCKCHIP
+       bool "Rockchip I2C driver"
+       depends on DM_I2C
+       help
+         Add support for the Rockchip I2C driver. This is used with various
+         Rockchip parts such as RK3126, RK3128, RK3036 and RK3288. All chips
+         have several I2C ports and all are provided, controled by the
+         device tree.
+
 config SYS_I2C_SANDBOX
        bool "Sandbox I2C driver"
        depends on SANDBOX && DM_I2C
@@ -63,13 +143,24 @@ config SYS_I2C_UNIPHIER
        depends on ARCH_UNIPHIER && DM_I2C
        default y
        help
-         Support for Panasonic UniPhier I2C controller driver.  This I2C
-         controller is used on PH1-LD4, PH1-sLD8 or older UniPhier SoCs.
+         Support for UniPhier I2C controller driver.  This I2C controller
+         is used on PH1-LD4, PH1-sLD8 or older UniPhier SoCs.
 
 config SYS_I2C_UNIPHIER_F
        bool "UniPhier FIFO-builtin I2C driver"
        depends on ARCH_UNIPHIER && DM_I2C
        default y
        help
-         Support for Panasonic UniPhier FIFO-builtin I2C controller driver.
+         Support for UniPhier FIFO-builtin I2C controller driver.
          This I2C controller is used on PH1-Pro4 or newer UniPhier SoCs.
+
+config SYS_I2C_MVTWSI
+       bool "Marvell I2C driver"
+       depends on DM_I2C
+       help
+         Support for Marvell I2C controllers as used on the orion5x and
+         kirkwood SoC families.
+
+source "drivers/i2c/muxes/Kconfig"
+
+endmenu