dm: core: Move dev_get_addr() etc. into a separate file

[u-boot] / drivers / i2c / Kconfig

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 39f62daf5d7f4bccad7b2fab6432e0ea5ffaa86c..c58bc1e1cf56feb12d35b611a7dbc2d15fe3b63e 100644 (file)
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -49,6 +49,20 @@ config I2C_CROS_EC_LDO
        avoid duplicating the logic in the TPS65090 regulator driver for
        enabling/disabling an LDO.
 
+config I2C_SET_DEFAULT_BUS_NUM
+       bool "Set default I2C bus number"
+       depends on DM_I2C
+       help
+         Set default number of I2C bus to be accessed. This option provides
+         behaviour similar to old (i.e. pre DM) I2C bus driver.
+
+config I2C_DEFAULT_BUS_NUMBER
+       hex "I2C default bus number"
+       depends on I2C_SET_DEFAULT_BUS_NUM
+       default 0x0
+       help
+         Number of default I2C bus to use
+
 config DM_I2C_GPIO
        bool "Enable Driver Model for software emulated I2C bus driver"
        depends on DM_I2C && DM_GPIO
@@ -100,6 +114,15 @@ config SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED
          enable status register. This config option can be enabled in such
          cases.
 
+config SYS_I2C_ASPEED
+       bool "Aspeed I2C Controller"
+       depends on DM_I2C && ARCH_ASPEED
+       help
+         Say yes here to select Aspeed I2C Host Controller. The driver
+         supports AST2500 and AST2400 controllers, but is very limited.
+         Only single master mode is supported and only byte-by-byte
+         synchronous reads and writes are supported, no Pool Buffers or DMA.
+
 config SYS_I2C_INTEL
        bool "Intel I2C/SMBUS driver"
        depends on DM_I2C
@@ -109,6 +132,12 @@ config SYS_I2C_INTEL
          the I2C API meaning that any I2C operations will immediately fail
          for now.
 
+config SYS_I2C_IMX_LPI2C
+       bool "NXP i.MX LPI2C driver"
+       depends on ARCH_MX7ULP
+       help
+         Add support for the NXP i.MX LPI2C driver.
+
 config SYS_I2C_MXC
        bool "NXP i.MX I2C driver"
        depends on MX6