+// SPDX-License-Identifier: GPL-2.0+
/*
* LPC32xx I2C interface driver
*
* (C) Copyright 2014-2015 DENX Software Engineering GmbH
* Written-by: Albert ARIBAUD - 3ADEV <albert.aribaud@3adev.fr>
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * NOTE: This driver should be converted to driver model before June 2017.
- * Please see doc/driver-model/i2c-howto.txt for instructions.
*/
#include <common.h>
#include <i2c.h>
#include <linux/errno.h>
#include <asm/arch/clk.h>
+#include <asm/arch/i2c.h>
+#include <dm.h>
+#include <mapmem.h>
/*
* Provide default speed and slave if target did not
#define CONFIG_SYS_I2C_LPC32XX_SLAVE 0
#endif
-/* i2c register set */
-struct lpc32xx_i2c_base {
- union {
- u32 rx;
- u32 tx;
- };
- u32 stat;
- u32 ctrl;
- u32 clk_hi;
- u32 clk_lo;
- u32 adr;
- u32 rxfl;
- u32 txfl;
- u32 rxb;
- u32 txb;
- u32 stx;
- u32 stxfl;
-};
-
/* TX register fields */
#define LPC32XX_I2C_TX_START 0x00000100
#define LPC32XX_I2C_TX_STOP 0x00000200
#define LPC32XX_I2C_STAT_NAI 0x00000004
#define LPC32XX_I2C_STAT_TDI 0x00000001
+#ifndef CONFIG_DM_I2C
static struct lpc32xx_i2c_base *lpc32xx_i2c[] = {
(struct lpc32xx_i2c_base *)I2C1_BASE,
(struct lpc32xx_i2c_base *)I2C2_BASE,
(struct lpc32xx_i2c_base *)(USB_BASE + 0x300)
};
+#endif
/* Set I2C bus speed */
static unsigned int __i2c_set_bus_speed(struct lpc32xx_i2c_base *base,
return 0;
}
+#ifndef CONFIG_DM_I2C
static void lpc32xx_i2c_init(struct i2c_adapter *adap,
int requested_speed, int slaveadd)
{
100000,
0,
2)
+#else /* CONFIG_DM_I2C */
+static int lpc32xx_i2c_probe(struct udevice *bus)
+{
+ struct lpc32xx_i2c_dev *dev = dev_get_platdata(bus);
+ bus->seq = dev->index;
+
+ __i2c_init(dev->base, dev->speed, 0, dev->index);
+ return 0;
+}
+
+static int lpc32xx_i2c_probe_chip(struct udevice *bus, u32 chip_addr,
+ u32 chip_flags)
+{
+ struct lpc32xx_i2c_dev *dev = dev_get_platdata(bus);
+ return __i2c_probe_chip(dev->base, chip_addr);
+}
+
+static int lpc32xx_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
+ int nmsgs)
+{
+ struct lpc32xx_i2c_dev *dev = dev_get_platdata(bus);
+ struct i2c_msg *dmsg, *omsg, dummy;
+ uint i = 0, address = 0;
+
+ memset(&dummy, 0, sizeof(struct i2c_msg));
+
+ /* We expect either two messages (one with an offset and one with the
+ * actual data) or one message (just data)
+ */
+ if (nmsgs > 2 || nmsgs == 0) {
+ debug("%s: Only one or two messages are supported.", __func__);
+ return -1;
+ }
+
+ omsg = nmsgs == 1 ? &dummy : msg;
+ dmsg = nmsgs == 1 ? msg : msg + 1;
+
+ /* the address is expected to be a uint, not a array. */
+ address = omsg->buf[0];
+ for (i = 1; i < omsg->len; i++)
+ address = (address << 8) + omsg->buf[i];
+
+ if (dmsg->flags & I2C_M_RD)
+ return __i2c_read(dev->base, dmsg->addr, address,
+ omsg->len, dmsg->buf, dmsg->len);
+ else
+ return __i2c_write(dev->base, dmsg->addr, address,
+ omsg->len, dmsg->buf, dmsg->len);
+}
+
+static int lpc32xx_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
+{
+ struct lpc32xx_i2c_dev *dev = dev_get_platdata(bus);
+ return __i2c_set_bus_speed(dev->base, speed, dev->index);
+}
+
+static int lpc32xx_i2c_reset(struct udevice *bus)
+{
+ struct lpc32xx_i2c_dev *dev = dev_get_platdata(bus);
+
+ __i2c_init(dev->base, dev->speed, 0, dev->index);
+ return 0;
+}
+
+static const struct dm_i2c_ops lpc32xx_i2c_ops = {
+ .xfer = lpc32xx_i2c_xfer,
+ .probe_chip = lpc32xx_i2c_probe_chip,
+ .deblock = lpc32xx_i2c_reset,
+ .set_bus_speed = lpc32xx_i2c_set_bus_speed,
+};
+
+U_BOOT_DRIVER(i2c_lpc32xx) = {
+ .id = UCLASS_I2C,
+ .name = "i2c_lpc32xx",
+ .probe = lpc32xx_i2c_probe,
+ .ops = &lpc32xx_i2c_ops,
+};
+#endif /* CONFIG_DM_I2C */