mmc: Add Marvell Xenon SDHCI controller driver

[u-boot] / drivers / mmc / Kconfig

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index e1f8f9dacfe495c452932561f239f600dd7cf114..147e52d33225f9416a70da14fbfb8a6071caee03 100644 (file)
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -68,15 +68,86 @@ config ATMEL_SDHCI
          It is compliant with the SD Host Controller Standard V3.0
          specification.
 
+config MMC_DAVINCI
+       bool "TI DAVINCI Multimedia Card Interface support"
+       depends on ARCH_DAVINCI
+       default y
+       help
+         This selects the TI DAVINCI Multimedia card Interface.
+         If you have an DAVINCI board with a Multimedia Card slot,
+         say Y here.  If unsure, say N.
+
+config MMC_DW
+       bool "Synopsys DesignWare Memory Card Interface"
+       help
+         This selects support for the Synopsys DesignWare Mobile Storage IP
+         block, this provides host support for SD and MMC interfaces, in both
+         PIO, internal DMA mode and external DMA mode.
+
+config MMC_DW_EXYNOS
+       bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
+       depends on ARCH_EXYNOS
+       depends on MMC_DW
+       default y
+       help
+         This selects support for Samsung Exynos SoC specific extensions to the
+         Synopsys DesignWare Memory Card Interface driver. Select this option
+         for platforms based on Exynos4 and Exynos5 SoC's.
+
+config MMC_DW_K3
+       bool "K3 specific extensions for Synopsys DW Memory Card Interface"
+       depends on MMC_DW
+       help
+         This selects support for Hisilicon K3 SoC specific extensions to the
+         Synopsys DesignWare Memory Card Interface driver. Select this option
+         for platforms based on Hisilicon K3 SoC's.
+
 config MMC_DW_ROCKCHIP
        bool "Rockchip SD/MMC controller support"
        depends on DM_MMC && OF_CONTROL
+       depends on MMC_DW
        help
          This enables support for the Rockchip SD/MMM controller, which is
          based on Designware IP. The device is compatible with at least
          SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
          as removeable SD and micro-SD cards.
 
+config MMC_DW_SOCFPGA
+       bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
+       depends on ARCH_SOCFPGA
+       depends on MMC_DW
+       default y
+       help
+         This selects support for Altera SOCFPGA specific extensions to the
+         Synopsys DesignWare Memory Card Interface driver. Select this option
+         for platforms based on Altera SOCFPGA.
+
+config MMC_MXC
+       bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
+       help
+         This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
+         Multimedia Card Interface. If you have an i.MX or MPC512x platform
+         with a Multimedia Card slot, say Y here.
+
+         If unsure, say N.
+
+config MMC_MXS
+       bool "Freescale MXS Multimedia Card Interface support"
+       help
+         This selects the Freescale SSP MMC controller found on MXS based
+         platforms like mx23/28.
+
+         If unsure, say N.
+
+config MMC_OMAP_HS
+       bool "TI OMAP High Speed Multimedia Card Interface support"
+       help
+         This selects the TI OMAP High Speed Multimedia card Interface.
+         If you have an omap2plus board with a Multimedia Card slot,
+         say Y here.
+
+         If unsure, say N.
+
 config SH_SDHI
        bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
        depends on RMOBILE
@@ -216,6 +287,35 @@ config MMC_SDHCI_SPEAR
 
          If unsure, say N.
 
+config MMC_SDHCI_XENON
+       bool "SDHCI support for the Xenon SDHCI controller"
+       depends on MMC_SDHCI && DM_MMC && OF_CONTROL
+       help
+         Support for Xenon SDHCI host controller on Marvell Armada 3700
+         7k/8k ARM SoCs platforms
+
+         If you have a controller with this interface, say Y here.
+
+         If unsure, say N.
+
+config MMC_SDHCI_TEGRA
+       bool "SDHCI platform support for the Tegra SD/MMC Controller"
+       depends on TEGRA
+       default y
+       help
+         This selects the Tegra SD/MMC controller. If you have a Tegra
+         platform with SD or MMC devices, say Y here.
+
+         If unsure, say N.
+
+config MMC_SUNXI
+       bool "Allwinner sunxi SD/MMC Host Controller support"
+       depends on ARCH_SUNXI && !UART0_PORT_F
+       default y
+       help
+         This selects support for the SD/MMC Host Controller on
+         Allwinner sunxi SoCs.
+
 endif
 
 endmenu