If you want MMC/SD/SDIO support, you should say Y here and
also to your specific host controller driver.
+config GENERIC_MMC
+ bool "Generic MMC driver framework"
+ default MMC
+
config DM_MMC
bool "Enable MMC controllers using Driver Model"
depends on DM
operations too, which can remove the need for malloc support in SPL
and thus further reduce footprint.
-config MSM_SDHCI
- bool "Qualcomm SDHCI controller"
- depends on DM_MMC && BLK && DM_MMC_OPS
- depends on MMC_SDHCI
+config MMC_DAVINCI
+ bool "TI DAVINCI Multimedia Card Interface support"
+ depends on ARCH_DAVINCI
+ default y
help
- Enables support for SDHCI 2.0 controller present on some Qualcomm
- Snapdragon devices. This device is compatible with eMMC v4.5 and
- SD 3.0 specifications. Both SD and eMMC devices are supported.
- Card-detect gpios are not supported.
+ This selects the TI DAVINCI Multimedia card Interface.
+ If you have an DAVINCI board with a Multimedia Card slot,
+ say Y here. If unsure, say N.
-config ATMEL_SDHCI
- bool "Atmel SDHCI controller support"
- depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
- depends on MMC_SDHCI
+config MMC_DW
+ bool "Synopsys DesignWare Memory Card Interface"
help
- This enables support for the Atmel SDHCI controller, which supports
- the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
- Memory Card Specification V3.0, and the SDIO V3.0 specification.
- It is compliant with the SD Host Controller Standard V3.0
- specification.
+ This selects support for the Synopsys DesignWare Mobile Storage IP
+ block, this provides host support for SD and MMC interfaces, in both
+ PIO, internal DMA mode and external DMA mode.
+
+config MMC_DW_EXYNOS
+ bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
+ depends on ARCH_EXYNOS
+ depends on MMC_DW
+ default y
+ help
+ This selects support for Samsung Exynos SoC specific extensions to the
+ Synopsys DesignWare Memory Card Interface driver. Select this option
+ for platforms based on Exynos4 and Exynos5 SoC's.
+
+config MMC_DW_K3
+ bool "K3 specific extensions for Synopsys DW Memory Card Interface"
+ depends on MMC_DW
+ help
+ This selects support for Hisilicon K3 SoC specific extensions to the
+ Synopsys DesignWare Memory Card Interface driver. Select this option
+ for platforms based on Hisilicon K3 SoC's.
-config ROCKCHIP_DWMMC
+config MMC_DW_ROCKCHIP
bool "Rockchip SD/MMC controller support"
depends on DM_MMC && OF_CONTROL
+ depends on MMC_DW
help
This enables support for the Rockchip SD/MMM controller, which is
based on Designware IP. The device is compatible with at least
SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
as removeable SD and micro-SD cards.
-config SH_SDHI
- bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
- depends on RMOBILE
+config MMC_DW_SOCFPGA
+ bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
+ depends on ARCH_SOCFPGA
+ depends on MMC_DW
+ default y
help
- Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
+ This selects support for Altera SOCFPGA specific extensions to the
+ Synopsys DesignWare Memory Card Interface driver. Select this option
+ for platforms based on Altera SOCFPGA.
-config PIC32_SDHCI
- bool "Microchip PIC32 on-chip SDHCI support"
- depends on DM_MMC && MACH_PIC32
- depends on MMC_SDHCI
+config MMC_MXC
+ bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
help
- Support for Microchip PIC32 SDHCI controller.
+ This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
+ Multimedia Card Interface. If you have an i.MX or MPC512x platform
+ with a Multimedia Card slot, say Y here.
-config ZYNQ_SDHCI
- bool "Arasan SDHCI controller support"
- depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS
- depends on MMC_SDHCI
+ If unsure, say N.
+
+config MMC_MXS
+ bool "Freescale MXS Multimedia Card Interface support"
help
- Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
+ This selects the Freescale SSP MMC controller found on MXS based
+ platforms like mx23/28.
-config ROCKCHIP_SDHCI
- bool "Arasan SDHCI controller for Rockchip support"
- depends on DM_MMC && BLK && DM_MMC_OPS
- depends on MMC_SDHCI
+ If unsure, say N.
+
+config MMC_PCI
+ bool "Support for MMC controllers on PCI"
help
- Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
+ This selects PCI-based MMC controllers.
+ If you have an MMC controller on a PCI bus, say Y here.
+
+ If unsure, say N.
+
+config MMC_OMAP_HS
+ bool "TI OMAP High Speed Multimedia Card Interface support"
+ help
+ This selects the TI OMAP High Speed Multimedia card Interface.
+ If you have an omap2plus board with a Multimedia Card slot,
+ say Y here.
+
+ If unsure, say N.
+
+config MMC_OMAP36XX_PINS
+ bool "Enable MMC1 on OMAP36xx/37xx"
+ depends on OMAP34XX && MMC_OMAP_HS
+ help
+ This enables extended-drain in the MMC/SD/SDIO1I/O and
+ GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
+ specific to the OMAP36xx/37xx using MMC1
+
+ If you have a controller with this interface, say Y here.
+
+ If unsure, say N.
+
+config SH_SDHI
+ bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
+ depends on RMOBILE
+ help
+ Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
config MMC_UNIPHIER
bool "UniPhier SD/MMC Host Controller support"
help
This selects support for the SD/MMC Host Controller on UniPhier SoCs.
-config SANDBOX_MMC
+config MMC_SANDBOX
bool "Sandbox MMC support"
- depends on MMC && SANDBOX
+ depends on SANDBOX
+ depends on BLK && DM_MMC_OPS && OF_CONTROL
help
This select a dummy sandbox MMC driver. At present this does nothing
other than allow sandbox to be build with MMC support. This
This enables support for the SDMA (Single Operation DMA) defined
in the SD Host Controller Standard Specification Version 1.00 .
+config MMC_SDHCI_ATMEL
+ bool "Atmel SDHCI controller support"
+ depends on ARCH_AT91
+ depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
+ depends on MMC_SDHCI
+ help
+ This enables support for the Atmel SDHCI controller, which supports
+ the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
+ Memory Card Specification V3.0, and the SDIO V3.0 specification.
+ It is compliant with the SD Host Controller Standard V3.0
+ specification.
+
config MMC_SDHCI_BCM2835
tristate "SDHCI support for the BCM2835 SD/MMC Controller"
depends on ARCH_BCM283X
If you have a controller with this interface, say Y here.
+config MMC_SDHCI_MSM
+ bool "Qualcomm SDHCI controller"
+ depends on BLK && DM_MMC_OPS
+ depends on MMC_SDHCI
+ help
+ Enables support for SDHCI 2.0 controller present on some Qualcomm
+ Snapdragon devices. This device is compatible with eMMC v4.5 and
+ SD 3.0 specifications. Both SD and eMMC devices are supported.
+ Card-detect gpios are not supported.
+
config MMC_SDHCI_MV
bool "SDHCI support on Marvell platform"
depends on ARCH_MVEBU
If unsure, say N.
+config MMC_SDHCI_PIC32
+ bool "Microchip PIC32 on-chip SDHCI support"
+ depends on DM_MMC && MACH_PIC32
+ depends on MMC_SDHCI
+ help
+ Support for Microchip PIC32 SDHCI controller.
+
+config MMC_SDHCI_ROCKCHIP
+ bool "Arasan SDHCI controller for Rockchip support"
+ depends on ARCH_ROCKCHIP
+ depends on DM_MMC && BLK && DM_MMC_OPS
+ depends on MMC_SDHCI
+ help
+ Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
+
config MMC_SDHCI_S5P
bool "SDHCI support on Samsung S5P SoC"
depends on MMC_SDHCI
If unsure, say N.
+config MMC_SDHCI_STI
+ bool "SDHCI support for STMicroelectronics SoC"
+ depends on MMC_SDHCI && OF_CONTROL
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ on STMicroelectronics STiH410 SoC.
+
+config MMC_SDHCI_XENON
+ bool "SDHCI support for the Xenon SDHCI controller"
+ depends on MMC_SDHCI && DM_MMC && OF_CONTROL
+ help
+ Support for Xenon SDHCI host controller on Marvell Armada 3700
+ 7k/8k ARM SoCs platforms
+
+ If you have a controller with this interface, say Y here.
+
+ If unsure, say N.
+
+config MMC_SDHCI_TANGIER
+ bool "Tangier SDHCI controller support"
+ depends on DM_MMC && BLK
+ depends on MMC_SDHCI
+ help
+ This selects support for SDHCI controller on Tanginer
+ SoC. Note that this controller does not sit on PCI bus and,
+ hence, cannot be enumerated by standard PCI means.
+
+ If you're using an Intel Tangier SoC (available on Intel
+ Edison board), say Y here.
+
+ If unsure, say N.
+
+config MMC_SDHCI_TEGRA
+ bool "SDHCI platform support for the Tegra SD/MMC Controller"
+ depends on TEGRA
+ default y
+ help
+ This selects the Tegra SD/MMC controller. If you have a Tegra
+ platform with SD or MMC devices, say Y here.
+
+ If unsure, say N.
+
+config MMC_SDHCI_ZYNQ
+ bool "Arasan SDHCI controller support"
+ depends on ARCH_ZYNQ || ARCH_ZYNQMP
+ depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS
+ depends on MMC_SDHCI
+ help
+ Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
+
+config MMC_SUNXI
+ bool "Allwinner sunxi SD/MMC Host Controller support"
+ depends on ARCH_SUNXI && !UART0_PORT_F
+ default y
+ help
+ This selects support for the SD/MMC Host Controller on
+ Allwinner sunxi SoCs.
+
endif
+config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
+ bool "Disable external clock loopback"
+ depends on MMC_SDHCI_TEGRA && TEGRA124
+ help
+ Disable the external clock loopback and use the internal one on SDMMC3
+ as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
+ being set to 0xfffd according to the TRM.
+
+ TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
+ approach once proper kernel integration made it mainline.
+
endmenu
config SYS_FSL_ERRATUM_ESDHC111
projects / u-boot / blobdiff