#include <bouncebuf.h>
#include <common.h>
+#include <errno.h>
#include <malloc.h>
+#include <memalign.h>
#include <mmc.h>
#include <dwmmc.h>
#include <asm-generic/errno.h>
while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
if (get_timer(start) > timeout) {
- printf("%s: Timeout on data busy\n", __func__);
+ debug("%s: Timeout on data busy\n", __func__);
return TIMEOUT;
}
}
}
if (i == retry) {
- printf("%s: Timeout.\n", __func__);
+ debug("%s: Timeout.\n", __func__);
return TIMEOUT;
}
debug("%s: Response Timeout.\n", __func__);
return TIMEOUT;
} else if (mask & DWMCI_INTMSK_RE) {
- printf("%s: Response Error.\n", __func__);
- return -1;
+ debug("%s: Response Error.\n", __func__);
+ return -EIO;
}
if (data) {
start = get_timer(0);
- timeout = 1000;
+ timeout = 240000;
for (;;) {
mask = dwmci_readl(host, DWMCI_RINTSTS);
/* Error during data transfer. */
if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) {
- printf("%s: DATA ERROR!\n", __func__);
+ debug("%s: DATA ERROR!\n", __func__);
ret = -EINVAL;
break;
}
/* Check for timeout. */
if (get_timer(start) > timeout) {
- printf("%s: Timeout waiting for data!\n",
+ debug("%s: Timeout waiting for data!\n",
__func__);
ret = TIMEOUT;
break;
* host->bus_hz should be set by user.
*/
if (host->get_mmc_clk)
- sclk = host->get_mmc_clk(host);
+ sclk = host->get_mmc_clk(host, freq);
else if (host->bus_hz)
sclk = host->bus_hz;
else {
- printf("%s: Didn't get source clock value.\n", __func__);
+ debug("%s: Didn't get source clock value.\n", __func__);
return -EINVAL;
}
do {
status = dwmci_readl(host, DWMCI_CMD);
if (timeout-- < 0) {
- printf("%s: Timeout!\n", __func__);
+ debug("%s: Timeout!\n", __func__);
return -ETIMEDOUT;
}
} while (status & DWMCI_CMD_START);
do {
status = dwmci_readl(host, DWMCI_CMD);
if (timeout-- < 0) {
- printf("%s: Timeout!\n", __func__);
+ debug("%s: Timeout!\n", __func__);
return -ETIMEDOUT;
}
} while (status & DWMCI_CMD_START);
dwmci_writel(host, DWMCI_PWREN, 1);
if (!dwmci_wait_reset(host, DWMCI_RESET_ALL)) {
- printf("%s[%d] Fail-reset!!\n", __func__, __LINE__);
- return -1;
+ debug("%s[%d] Fail-reset!!\n", __func__, __LINE__);
+ return -EIO;
}
/* Enumerate at 400KHz */
dwmci_writel(host, DWMCI_IDINTEN, 0);
dwmci_writel(host, DWMCI_BMOD, 1);
- if (host->fifoth_val) {
- dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
+ if (!host->fifoth_val) {
+ uint32_t fifo_size;
+
+ fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
+ fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
+ host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
+ TX_WMARK(fifo_size / 2);
}
+ dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
dwmci_writel(host, DWMCI_CLKENA, 0);
dwmci_writel(host, DWMCI_CLKSRC, 0);