/*
- * Copyright 2007,2010 Freescale Semiconductor, Inc
+ * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc
* Andy Fleming
*
* Based vaguely on the pxa mmc code:
* (C) Copyright 2003
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
DECLARE_GLOBAL_DATA_PTR;
struct fsl_esdhc {
- uint dsaddr;
- uint blkattr;
- uint cmdarg;
- uint xfertyp;
- uint cmdrsp0;
- uint cmdrsp1;
- uint cmdrsp2;
- uint cmdrsp3;
- uint datport;
- uint prsstat;
- uint proctl;
- uint sysctl;
- uint irqstat;
- uint irqstaten;
- uint irqsigen;
- uint autoc12err;
- uint hostcapblt;
- uint wml;
- char reserved1[8];
- uint fevt;
- char reserved2[168];
- uint hostver;
- char reserved3[780];
- uint scr;
+ uint dsaddr; /* SDMA system address register */
+ uint blkattr; /* Block attributes register */
+ uint cmdarg; /* Command argument register */
+ uint xfertyp; /* Transfer type register */
+ uint cmdrsp0; /* Command response 0 register */
+ uint cmdrsp1; /* Command response 1 register */
+ uint cmdrsp2; /* Command response 2 register */
+ uint cmdrsp3; /* Command response 3 register */
+ uint datport; /* Buffer data port register */
+ uint prsstat; /* Present state register */
+ uint proctl; /* Protocol control register */
+ uint sysctl; /* System Control Register */
+ uint irqstat; /* Interrupt status register */
+ uint irqstaten; /* Interrupt status enable register */
+ uint irqsigen; /* Interrupt signal enable register */
+ uint autoc12err; /* Auto CMD error status register */
+ uint hostcapblt; /* Host controller capabilities register */
+ uint wml; /* Watermark level register */
+ uint mixctrl; /* For USDHC */
+ char reserved1[4]; /* reserved */
+ uint fevt; /* Force event register */
+ uint admaes; /* ADMA error status register */
+ uint adsaddr; /* ADMA system address register */
+ char reserved2[160]; /* reserved */
+ uint hostver; /* Host controller version register */
+ char reserved3[4]; /* reserved */
+ uint dmaerraddr; /* DMA error address register */
+ char reserved4[4]; /* reserved */
+ uint dmaerrattr; /* DMA error attribute register */
+ char reserved5[4]; /* reserved */
+ uint hostcapblt2; /* Host controller capabilities register 2 */
+ char reserved6[8]; /* reserved */
+ uint tcr; /* Tuning control register */
+ char reserved7[28]; /* reserved */
+ uint sddirctl; /* SD direction control register */
+ char reserved8[712]; /* reserved */
+ uint scr; /* eSDHC control register */
};
/* Return the XFERTYP flags for a given command and data packet */
-uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
+static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
{
uint xfertyp = 0;
if (data->blocks > 1) {
xfertyp |= XFERTYP_MSBSEL;
xfertyp |= XFERTYP_BCEN;
+#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
+ xfertyp |= XFERTYP_AC12EN;
+#endif
}
if (data->flags & MMC_DATA_READ)
else if (cmd->resp_type & MMC_RSP_PRESENT)
xfertyp |= XFERTYP_RSPTYP_48;
+#if defined(CONFIG_MX53) || defined(CONFIG_PPC_T4240)
+ if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
+ xfertyp |= XFERTYP_CMDTYP_ABORT;
+#endif
return XFERTYP_CMD(cmd->cmdidx) | xfertyp;
}
static void
esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data)
{
- struct fsl_esdhc *regs = mmc->priv;
+ struct fsl_esdhc_cfg *cfg = mmc->priv;
+ struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
uint blocks;
char *buffer;
uint databuf;
static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
{
int timeout;
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ struct fsl_esdhc_cfg *cfg = mmc->priv;
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
-#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
+
uint wml_value;
wml_value = data->blocksize/4;
if (data->flags & MMC_DATA_READ) {
- if (wml_value > 0x10)
- wml_value = 0x10;
+ if (wml_value > WML_RD_WML_MAX)
+ wml_value = WML_RD_WML_MAX_VAL;
esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value);
+#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
esdhc_write32(®s->dsaddr, (u32)data->dest);
+#endif
} else {
- if (wml_value > 0x80)
- wml_value = 0x80;
+#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
+ flush_dcache_range((ulong)data->src,
+ (ulong)data->src+data->blocks
+ *data->blocksize);
+#endif
+ if (wml_value > WML_WR_WML_MAX)
+ wml_value = WML_WR_WML_MAX_VAL;
if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) {
printf("\nThe SD card is locked. Can not write to a locked card.\n\n");
return TIMEOUT;
esdhc_clrsetbits32(®s->wml, WML_WR_WML_MASK,
wml_value << 16);
+#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
esdhc_write32(®s->dsaddr, (u32)data->src);
+#endif
}
-#else /* CONFIG_SYS_FSL_ESDHC_USE_PIO */
- if (!(data->flags & MMC_DATA_READ)) {
- if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) {
- printf("\nThe SD card is locked. "
- "Can not write to a locked card.\n\n");
- return TIMEOUT;
- }
- esdhc_write32(®s->dsaddr, (u32)data->src);
- } else
- esdhc_write32(®s->dsaddr, (u32)data->dest);
-#endif /* CONFIG_SYS_FSL_ESDHC_USE_PIO */
esdhc_write32(®s->blkattr, data->blocks << 16 | data->blocksize);
/* Calculate the timeout period for data transactions */
- timeout = fls(mmc->tran_speed/10) - 1;
+ /*
+ * 1)Timeout period = (2^(timeout+13)) SD Clock cycles
+ * 2)Timeout period should be minimum 0.250sec as per SD Card spec
+ * So, Number of SD Clock cycles for 0.25sec should be minimum
+ * (SD Clock/sec * 0.25 sec) SD Clock cycles
+ * = (mmc->clock * 1/4) SD Clock cycles
+ * As 1) >= 2)
+ * => (2^(timeout+13)) >= mmc->clock * 1/4
+ * Taking log2 both the sides
+ * => timeout + 13 >= log2(mmc->clock/4)
+ * Rounding up to next power of 2
+ * => timeout + 13 = log2(mmc->clock/4) + 1
+ * => timeout + 13 = fls(mmc->clock/4)
+ */
+ timeout = fls(mmc->clock/4);
timeout -= 13;
if (timeout > 14)
if (timeout < 0)
timeout = 0;
+#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
+ if ((timeout == 4) || (timeout == 8) || (timeout == 12))
+ timeout++;
+#endif
+
+#ifdef ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
+ timeout = 0xE;
+#endif
esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, timeout << 16);
return 0;
}
+#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
+static void check_and_invalidate_dcache_range
+ (struct mmc_cmd *cmd,
+ struct mmc_data *data) {
+ unsigned start = (unsigned)data->dest ;
+ unsigned size = roundup(ARCH_DMA_MINALIGN,
+ data->blocks*data->blocksize);
+ unsigned end = start+size ;
+ invalidate_dcache_range(start, end);
+}
+#endif
/*
* Sends a command out on the bus. Takes the mmc pointer,
static int
esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
{
+ int err = 0;
uint xfertyp;
uint irqstat;
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ struct fsl_esdhc_cfg *cfg = mmc->priv;
volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
+ if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
+ return 0;
+#endif
+
esdhc_write32(®s->irqstat, -1);
sync();
/* Set up for a data transfer if we have one */
if (data) {
- int err;
-
err = esdhc_setup_data(mmc, data);
if(err)
return err;
/* Figure out the transfer arguments */
xfertyp = esdhc_xfertyp(cmd, data);
+ /* Mask all irqs */
+ esdhc_write32(®s->irqsigen, 0);
+
/* Send the command */
esdhc_write32(®s->cmdarg, cmd->cmdarg);
+#if defined(CONFIG_FSL_USDHC)
+ esdhc_write32(®s->mixctrl,
+ (esdhc_read32(®s->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F));
+ esdhc_write32(®s->xfertyp, xfertyp & 0xFFFF0000);
+#else
esdhc_write32(®s->xfertyp, xfertyp);
+#endif
/* Wait for the command to complete */
- while (!(esdhc_read32(®s->irqstat) & IRQSTAT_CC))
+ while (!(esdhc_read32(®s->irqstat) & (IRQSTAT_CC | IRQSTAT_CTOE)))
;
irqstat = esdhc_read32(®s->irqstat);
- esdhc_write32(®s->irqstat, irqstat);
- if (irqstat & CMD_ERR)
- return COMM_ERR;
+ if (irqstat & CMD_ERR) {
+ err = COMM_ERR;
+ goto out;
+ }
- if (irqstat & IRQSTAT_CTOE)
- return TIMEOUT;
+ if (irqstat & IRQSTAT_CTOE) {
+ err = TIMEOUT;
+ goto out;
+ }
+
+ /* Workaround for ESDHC errata ENGcm03648 */
+ if (!data && (cmd->resp_type & MMC_RSP_BUSY)) {
+ int timeout = 2500;
+
+ /* Poll on DATA0 line for cmd with busy signal for 250 ms */
+ while (timeout > 0 && !(esdhc_read32(®s->prsstat) &
+ PRSSTAT_DAT0)) {
+ udelay(100);
+ timeout--;
+ }
+
+ if (timeout <= 0) {
+ printf("Timeout waiting for DAT0 to go high!\n");
+ err = TIMEOUT;
+ goto out;
+ }
+ }
/* Copy the response to the response buffer */
if (cmd->resp_type & MMC_RSP_136) {
do {
irqstat = esdhc_read32(®s->irqstat);
- if (irqstat & DATA_ERR)
- return COMM_ERR;
+ if (irqstat & IRQSTAT_DTOE) {
+ err = TIMEOUT;
+ goto out;
+ }
+
+ if (irqstat & DATA_ERR) {
+ err = COMM_ERR;
+ goto out;
+ }
+ } while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE);
- if (irqstat & IRQSTAT_DTOE)
- return TIMEOUT;
- } while (!(irqstat & IRQSTAT_TC) &&
- (esdhc_read32(®s->prsstat) & PRSSTAT_DLA));
+ if (data->flags & MMC_DATA_READ)
+ check_and_invalidate_dcache_range(cmd, data);
#endif
}
+out:
+ /* Reset CMD and DATA portions on error */
+ if (err) {
+ esdhc_write32(®s->sysctl, esdhc_read32(®s->sysctl) |
+ SYSCTL_RSTC);
+ while (esdhc_read32(®s->sysctl) & SYSCTL_RSTC)
+ ;
+
+ if (data) {
+ esdhc_write32(®s->sysctl,
+ esdhc_read32(®s->sysctl) |
+ SYSCTL_RSTD);
+ while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTD))
+ ;
+ }
+ }
+
esdhc_write32(®s->irqstat, -1);
- return 0;
+ return err;
}
-void set_sysctl(struct mmc *mmc, uint clock)
+static void set_sysctl(struct mmc *mmc, uint clock)
{
- int sdhc_clk = gd->sdhc_clk;
int div, pre_div;
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ struct fsl_esdhc_cfg *cfg = mmc->priv;
volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ int sdhc_clk = cfg->sdhc_clk;
uint clk;
- if (clock < mmc->f_min)
- clock = mmc->f_min;
+ if (clock < mmc->cfg->f_min)
+ clock = mmc->cfg->f_min;
if (sdhc_clk / 16 > clock) {
for (pre_div = 2; pre_div < 256; pre_div *= 2)
static void esdhc_set_ios(struct mmc *mmc)
{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ struct fsl_esdhc_cfg *cfg = mmc->priv;
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
/* Set the clock speed */
static int esdhc_init(struct mmc *mmc)
{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ struct fsl_esdhc_cfg *cfg = mmc->priv;
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
int timeout = 1000;
- int ret = 0;
- u8 card_absent;
/* Reset the entire host controller */
- esdhc_write32(®s->sysctl, SYSCTL_RSTA);
+ esdhc_setbits32(®s->sysctl, SYSCTL_RSTA);
/* Wait until the controller is available */
while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout)
udelay(1000);
+#ifndef ARCH_MXC
/* Enable cache snooping */
- if (cfg && !cfg->no_snoop)
- esdhc_write32(®s->scr, 0x00000040);
+ esdhc_write32(®s->scr, 0x00000040);
+#endif
- esdhc_write32(®s->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
+ esdhc_setbits32(®s->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
/* Set the initial clock speed */
mmc_set_clock(mmc, 400000);
/* Set timout to the maximum value */
esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16);
- /* Check if there is a callback for detecting the card */
- if (board_mmc_getcd(&card_absent, mmc)) {
- timeout = 1000;
- while (!(esdhc_read32(®s->prsstat) & PRSSTAT_CINS) &&
- --timeout)
- udelay(1000);
+ return 0;
+}
- if (timeout <= 0)
- ret = NO_CARD_ERR;
- } else {
- if (card_absent)
- ret = NO_CARD_ERR;
- }
+static int esdhc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = mmc->priv;
+ struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ int timeout = 1000;
- return ret;
+#ifdef CONFIG_ESDHC_DETECT_QUIRK
+ if (CONFIG_ESDHC_DETECT_QUIRK)
+ return 1;
+#endif
+ while (!(esdhc_read32(®s->prsstat) & PRSSTAT_CINS) && --timeout)
+ udelay(1000);
+
+ return timeout > 0;
}
static void esdhc_reset(struct fsl_esdhc *regs)
unsigned long timeout = 100; /* wait max 100 ms */
/* reset the controller */
- esdhc_write32(®s->sysctl, SYSCTL_RSTA);
+ esdhc_setbits32(®s->sysctl, SYSCTL_RSTA);
/* hardware clears the bit when it is done */
while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout)
printf("MMC/SD: Reset never completed.\n");
}
+static const struct mmc_ops esdhc_ops = {
+ .send_cmd = esdhc_send_cmd,
+ .set_ios = esdhc_set_ios,
+ .init = esdhc_init,
+ .getcd = esdhc_getcd,
+};
+
int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
{
struct fsl_esdhc *regs;
struct mmc *mmc;
- u32 caps;
+ u32 caps, voltage_caps;
if (!cfg)
return -1;
- mmc = malloc(sizeof(struct mmc));
-
- sprintf(mmc->name, "FSL_ESDHC");
regs = (struct fsl_esdhc *)cfg->esdhc_base;
/* First reset the eSDHC controller */
esdhc_reset(regs);
- mmc->priv = cfg;
- mmc->send_cmd = esdhc_send_cmd;
- mmc->set_ios = esdhc_set_ios;
- mmc->init = esdhc_init;
+ esdhc_setbits32(®s->sysctl, SYSCTL_PEREN | SYSCTL_HCKEN
+ | SYSCTL_IPGEN | SYSCTL_CKEN);
+
+ memset(&cfg->cfg, 0, sizeof(cfg->cfg));
+ voltage_caps = 0;
caps = regs->hostcapblt;
+#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC135
+ caps = caps & ~(ESDHC_HOSTCAPBLT_SRS |
+ ESDHC_HOSTCAPBLT_VS18 | ESDHC_HOSTCAPBLT_VS30);
+#endif
+
+/* T4240 host controller capabilities register should have VS33 bit */
+#ifdef CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+ caps = caps | ESDHC_HOSTCAPBLT_VS33;
+#endif
+
if (caps & ESDHC_HOSTCAPBLT_VS18)
- mmc->voltages |= MMC_VDD_165_195;
+ voltage_caps |= MMC_VDD_165_195;
if (caps & ESDHC_HOSTCAPBLT_VS30)
- mmc->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
+ voltage_caps |= MMC_VDD_29_30 | MMC_VDD_30_31;
if (caps & ESDHC_HOSTCAPBLT_VS33)
- mmc->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
+ voltage_caps |= MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ cfg->cfg.name = "FSL_SDHC";
+ cfg->cfg.ops = &esdhc_ops;
+#ifdef CONFIG_SYS_SD_VOLTAGE
+ cfg->cfg.voltages = CONFIG_SYS_SD_VOLTAGE;
+#else
+ cfg->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+#endif
+ if ((cfg->cfg.voltages & voltage_caps) == 0) {
+ printf("voltage not supported by controller\n");
+ return -1;
+ }
+
+ cfg->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | MMC_MODE_HC;
- mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
+ if (cfg->max_bus_width > 0) {
+ if (cfg->max_bus_width < 8)
+ cfg->cfg.host_caps &= ~MMC_MODE_8BIT;
+ if (cfg->max_bus_width < 4)
+ cfg->cfg.host_caps &= ~MMC_MODE_4BIT;
+ }
if (caps & ESDHC_HOSTCAPBLT_HSS)
- mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
+ cfg->cfg.host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
- mmc->f_min = 400000;
- mmc->f_max = MIN(gd->sdhc_clk, 50000000);
+#ifdef CONFIG_ESDHC_DETECT_8_BIT_QUIRK
+ if (CONFIG_ESDHC_DETECT_8_BIT_QUIRK)
+ cfg->cfg.host_caps &= ~MMC_MODE_8BIT;
+#endif
+
+ cfg->cfg.f_min = 400000;
+ cfg->cfg.f_max = MIN(gd->arch.sdhc_clk, 52000000);
- mmc_register(mmc);
+ cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+
+ mmc = mmc_create(&cfg->cfg, cfg);
+ if (mmc == NULL)
+ return -1;
return 0;
}
{
struct fsl_esdhc_cfg *cfg;
- cfg = malloc(sizeof(struct fsl_esdhc_cfg));
- memset(cfg, 0, sizeof(struct fsl_esdhc_cfg));
+ cfg = calloc(sizeof(struct fsl_esdhc_cfg), 1);
cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
+ cfg->sdhc_clk = gd->arch.sdhc_clk;
return fsl_esdhc_initialize(bis, cfg);
}
void fdt_fixup_esdhc(void *blob, bd_t *bd)
{
const char *compat = "fsl,esdhc";
- const char *status = "okay";
+#ifdef CONFIG_FSL_ESDHC_PIN_MUX
if (!hwconfig("esdhc")) {
- status = "disabled";
- goto out;
+ do_fixup_by_compat(blob, compat, "status", "disabled",
+ 8 + 1, 1);
+ return;
}
+#endif
do_fixup_by_compat_u32(blob, compat, "clock-frequency",
- gd->sdhc_clk, 1);
-out:
- do_fixup_by_compat(blob, compat, "status", status,
- strlen(status) + 1, 1);
+ gd->arch.sdhc_clk, 1);
+
+ do_fixup_by_compat(blob, compat, "status", "okay",
+ 4 + 1, 1);
}
#endif
projects / u-boot / blobdiff