#include <part.h>
#include <malloc.h>
#include <asm/io.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
#include <asm/byteorder.h>
#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
struct mmc_config cfg;
struct atmel_mci *mci;
unsigned int initialized:1;
+ unsigned int curr_clk;
};
/* Read Atmel MCI IP version */
}
}
-
+ if (version >= 0x500)
+ priv->curr_clk = bus_hz / (clkdiv * 2 + clkodd + 2);
+ else
+ priv->curr_clk = (bus_hz / (clkdiv + 1)) / 2;
blklen &= 0xfffc;
mr = MMCI_BF(CLKDIV, clkdiv);
if (mmc->card_caps & mmc->cfg->host_caps & MMC_MODE_HS)
writel(MMCI_BIT(HSMODE), &mci->cfg);
- udelay(50);
-
priv->initialized = 1;
}
if (!priv->initialized) {
puts ("MCI not initialized!\n");
- return COMM_ERR;
+ return -ECOMM;
}
/* Figure out the transfer arguments */
if ((status & error_flags) & MMCI_BIT(RTOE)) {
dump_cmd(cmdr, cmd->cmdarg, status, "Command Time Out");
- return TIMEOUT;
+ return -ETIMEDOUT;
} else if (status & error_flags) {
dump_cmd(cmdr, cmd->cmdarg, status, "Command Failed");
- return COMM_ERR;
+ return -ECOMM;
}
/* Copy the response to the response buffer */
if (status) {
dump_cmd(cmdr, cmd->cmdarg, status,
"Data Transfer Failed");
- return COMM_ERR;
+ return -ECOMM;
}
}
if (status & error_flags) {
dump_cmd(cmdr, cmd->cmdarg, status,
"DTIP Wait Failed");
- return COMM_ERR;
+ return -ECOMM;
}
i++;
} while ((status & MMCI_BIT(DTIP)) && i < 10000);
}
}
+ /*
+ * After the switch command, wait for 8 clocks before the next
+ * command
+ */
+ if (cmd->cmdidx == MMC_CMD_SWITCH)
+ udelay(8*1000000 / priv->curr_clk); /* 8 clk in us */
+
return 0;
}