#include <i2c.h>
#include <twl4030.h>
#include <twl6030.h>
-#include <twl6035.h>
+#include <palmas.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/mmc_host_def.h>
struct omap_hsmmc_data {
struct hsmmc *base_addr;
int cd_gpio;
+ int wp_gpio;
};
/* If we fail after 1 second wait, something is really bad */
int cd_gpio = ((struct omap_hsmmc_data *)mmc->priv)->cd_gpio;
return gpio_get_value(cd_gpio);
}
+
+static int omap_mmc_getwp(struct mmc *mmc)
+{
+ int wp_gpio = ((struct omap_hsmmc_data *)mmc->priv)->wp_gpio;
+ return gpio_get_value(wp_gpio);
+}
#else
static inline int omap_mmc_setup_gpio_in(int gpio, const char *label)
{
}
#define omap_mmc_getcd NULL
+#define omap_mmc_getwp NULL
#endif
#if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER)
static void omap4_vmmc_pbias_config(struct mmc *mmc)
{
u32 value = 0;
- struct omap_sys_ctrl_regs *const ctrl =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
- value = readl(&ctrl->control_pbiaslite);
+ value = readl((*ctrl)->control_pbiaslite);
value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ);
- writel(value, &ctrl->control_pbiaslite);
+ writel(value, (*ctrl)->control_pbiaslite);
/* set VMMC to 3V */
twl6030_power_mmc_init();
- value = readl(&ctrl->control_pbiaslite);
+ value = readl((*ctrl)->control_pbiaslite);
value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ;
- writel(value, &ctrl->control_pbiaslite);
+ writel(value, (*ctrl)->control_pbiaslite);
}
#endif
-#if defined(CONFIG_OMAP54XX) && defined(CONFIG_TWL6035_POWER)
+#if defined(CONFIG_OMAP54XX) && defined(CONFIG_PALMAS_POWER)
static void omap5_pbias_config(struct mmc *mmc)
{
u32 value = 0;
- struct omap_sys_ctrl_regs *const ctrl =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
- value = readl(&ctrl->control_pbias);
- value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
- value |= SDCARD_BIAS_HIZ_MODE;
- writel(value, &ctrl->control_pbias);
-
- twl6035_mmc1_poweron_ldo();
-
- value = readl(&ctrl->control_pbias);
- value &= ~SDCARD_BIAS_HIZ_MODE;
- value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ;
- writel(value, &ctrl->control_pbias);
-
- value = readl(&ctrl->control_pbias);
- if (value & (1 << 23)) {
- value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
- value |= SDCARD_BIAS_HIZ_MODE;
- writel(value, &ctrl->control_pbias);
- }
+
+ value = readl((*ctrl)->control_pbias);
+ value &= ~SDCARD_PWRDNZ;
+ writel(value, (*ctrl)->control_pbias);
+ udelay(10); /* wait 10 us */
+ value &= ~SDCARD_BIAS_PWRDNZ;
+ writel(value, (*ctrl)->control_pbias);
+
+ palmas_mmc1_poweron_ldo();
+
+ value = readl((*ctrl)->control_pbias);
+ value |= SDCARD_BIAS_PWRDNZ;
+ writel(value, (*ctrl)->control_pbias);
+ udelay(150); /* wait 150 us */
+ value |= SDCARD_PWRDNZ;
+ writel(value, (*ctrl)->control_pbias);
+ udelay(150); /* wait 150 us */
}
#endif
if (mmc->block_dev.dev == 0)
omap4_vmmc_pbias_config(mmc);
#endif
-#if defined(CONFIG_OMAP54XX) && defined(CONFIG_TWL6035_POWER)
+#if defined(CONFIG_OMAP54XX) && defined(CONFIG_PALMAS_POWER)
if (mmc->block_dev.dev == 0)
omap5_pbias_config(mmc);
#endif
mmc_reg_out(&mmc_base->sysctl, bit, bit);
+ /*
+ * CMD(DAT) lines reset procedures are slightly different
+ * for OMAP3 and OMAP4(AM335x,OMAP5,DRA7xx).
+ * According to OMAP3 TRM:
+ * Set SRC(SRD) bit in MMCHS_SYSCTL register to 0x1 and wait until it
+ * returns to 0x0.
+ * According to OMAP4(AM335x,OMAP5,DRA7xx) TRMs, CMD(DATA) lines reset
+ * procedure steps must be as follows:
+ * 1. Initiate CMD(DAT) line reset by writing 0x1 to SRC(SRD) bit in
+ * MMCHS_SYSCTL register (SD_SYSCTL for AM335x).
+ * 2. Poll the SRC(SRD) bit until it is set to 0x1.
+ * 3. Wait until the SRC (SRD) bit returns to 0x0
+ * (reset procedure is completed).
+ */
+#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \
+ defined(CONFIG_AM33XX)
+ if (!(readl(&mmc_base->sysctl) & bit)) {
+ start = get_timer(0);
+ while (!(readl(&mmc_base->sysctl) & bit)) {
+ if (get_timer(0) - start > MAX_RETRY_MS)
+ return;
+ }
+ }
+#endif
start = get_timer(0);
while ((readl(&mmc_base->sysctl) & bit) != 0) {
if (get_timer(0) - start > MAX_RETRY_MS) {
}
writel(cmd->cmdarg, &mmc_base->arg);
+ udelay(20); /* To fix "No status update" error on eMMC */
writel((cmd->cmdidx << 24) | flags, &mmc_base->cmd);
start = get_timer(0);
unsigned int count;
/*
- * Start Polled Read
+ * Start Polled Write
*/
count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size;
count /= 4;
writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl);
}
-int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio)
+int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
+ int wp_gpio)
{
struct mmc *mmc = &hsmmc_dev[dev_index];
struct omap_hsmmc_data *priv_data = &hsmmc_dev_data[dev_index];
+ uint host_caps_val = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS |
+ MMC_MODE_HC;
sprintf(mmc->name, "OMAP SD/MMC");
mmc->send_cmd = mmc_send_cmd;
mmc->set_ios = mmc_set_ios;
mmc->init = mmc_init_setup;
- mmc->getcd = omap_mmc_getcd;
mmc->priv = priv_data;
switch (dev_index) {
#ifdef OMAP_HSMMC2_BASE
case 1:
priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE;
+#if (defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \
+ defined(CONFIG_DRA7XX)) && defined(CONFIG_HSMMC2_8BIT)
+ /* Enable 8-bit interface for eMMC on OMAP4/5 or DRA7XX */
+ host_caps_val |= MMC_MODE_8BIT;
+#endif
break;
#endif
#ifdef OMAP_HSMMC3_BASE
case 2:
priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE;
+#if defined(CONFIG_DRA7XX) && defined(CONFIG_HSMMC3_8BIT)
+ /* Enable 8-bit interface for eMMC on DRA7XX */
+ host_caps_val |= MMC_MODE_8BIT;
+#endif
break;
#endif
default:
return 1;
}
priv_data->cd_gpio = omap_mmc_setup_gpio_in(cd_gpio, "mmc_cd");
+ if (priv_data->cd_gpio != -1)
+ mmc->getcd = omap_mmc_getcd;
+
+ priv_data->wp_gpio = omap_mmc_setup_gpio_in(wp_gpio, "mmc_wp");
+ if (priv_data->wp_gpio != -1)
+ mmc->getwp = omap_mmc_getwp;
+
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
- mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS |
- MMC_MODE_HC) & ~host_caps_mask;
+ mmc->host_caps = host_caps_val & ~host_caps_mask;
mmc->f_min = 400000;
projects / u-boot / blobdiff