* Copyright 2011, Marvell Semiconductor Inc.
* Lei Wen <leiwen@marvell.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*
* Back ported to the 8xx platform (from the 8260 platform) by
* Murray.Jensen@cmst.csiro.au, 27-Jan-01.
unsigned int stat, rdy, mask, timeout, block = 0;
#ifdef CONFIG_MMC_SDMA
unsigned char ctrl;
- ctrl = sdhci_readl(host, SDHCI_HOST_CONTROL);
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
ctrl &= ~SDHCI_CTRL_DMA_MASK;
- ctrl |= SDHCI_CTRL_SDMA;
- sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL);
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
#endif
timeout = 1000000;
return 0;
}
+/*
+ * No command will be sent by driver if card is busy, so driver must wait
+ * for card ready state.
+ * Every time when card is busy after timeout then (last) timeout value will be
+ * increased twice but only if it doesn't exceed global defined maximum.
+ * Each function call will use last timeout value. Max timeout can be redefined
+ * in board config file.
+ */
+#ifndef CONFIG_SDHCI_CMD_MAX_TIMEOUT
+#define CONFIG_SDHCI_CMD_MAX_TIMEOUT 3200
+#endif
+#define CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT 100
+
int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
struct mmc_data *data)
{
int ret = 0;
int trans_bytes = 0, is_aligned = 1;
u32 mask, flags, mode;
- unsigned int timeout, start_addr = 0;
+ unsigned int time = 0, start_addr = 0;
unsigned int retry = 10000;
+ int mmc_dev = mmc->block_dev.dev;
- /* Wait max 10 ms */
- timeout = 10;
+ /* Timeout unit - ms */
+ static unsigned int cmd_timeout = CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT;
sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS);
mask = SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT;
mask &= ~SDHCI_DATA_INHIBIT;
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
- if (timeout == 0) {
- printf("Controller never released inhibit bit(s).\n");
- return COMM_ERR;
+ if (time >= cmd_timeout) {
+ printf("MMC: %d busy ", mmc_dev);
+ if (2 * cmd_timeout <= CONFIG_SDHCI_CMD_MAX_TIMEOUT) {
+ cmd_timeout += cmd_timeout;
+ printf("timeout increasing to: %u ms.\n",
+ cmd_timeout);
+ } else {
+ puts("timeout.\n");
+ return COMM_ERR;
+ }
}
- timeout--;
+ time++;
udelay(1000);
}
if (clock == 0)
return 0;
- if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) {
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
/* Version 3.00 divisors must be a multiple of 2. */
if (mmc->f_max <= clock)
div = 1;
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
if (mmc->bus_width == 8) {
ctrl &= ~SDHCI_CTRL_4BITBUS;
- if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
+ if ((SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) ||
+ (host->quirks & SDHCI_QUIRK_USE_WIDE8))
ctrl |= SDHCI_CTRL_8BITBUS;
} else {
- if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
ctrl &= ~SDHCI_CTRL_8BITBUS;
if (mmc->bus_width == 4)
ctrl |= SDHCI_CTRL_4BITBUS;
if (max_clk)
mmc->f_max = max_clk;
else {
- if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
mmc->f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK)
>> SDHCI_CLOCK_BASE_SHIFT;
else
if (min_clk)
mmc->f_min = min_clk;
else {
- if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_300;
else
mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_200;
mmc->voltages |= host->voltages;
mmc->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
- if (caps & SDHCI_CAN_DO_8BIT)
- mmc->host_caps |= MMC_MODE_8BIT;
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
+ if (caps & SDHCI_CAN_DO_8BIT)
+ mmc->host_caps |= MMC_MODE_8BIT;
+ }
if (host->host_caps)
mmc->host_caps |= host->host_caps;