nand/fsl_ifc: Convert to self-init

[u-boot] / drivers / mtd / nand / fsl_elbc_nand.c

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 9076ad4cdc36ac517ef1658f91a0955c2223ab16..fb34d129b1559726536c445156b1dd1507e3b503 100644 (file)
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -748,7 +748,7 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
 
        /* set up nand options */
        nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
-                       NAND_USE_FLASH_BBT;
+                       NAND_USE_FLASH_BBT | NAND_NO_SUBPAGE_WRITE;
 
        nand->controller = &elbc_ctrl->controller;
        nand->priv = priv;
@@ -756,20 +756,8 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
        nand->ecc.read_page = fsl_elbc_read_page;
        nand->ecc.write_page = fsl_elbc_write_page;
 
-#ifdef CONFIG_FSL_ELBC_FMR
-       priv->fmr = CONFIG_FSL_ELBC_FMR;
-#else
        priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT);
 
-       /*
-        * Hardware expects small page has ECCM0, large page has ECCM1
-        * when booting from NAND.  Board config can override if not
-        * booting from NAND.
-        */
-       if (or & OR_FCM_PGS)
-               priv->fmr |= FMR_ECCM;
-#endif
-
        /* If CS Base Register selects full hardware ECC then use it */
        if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
                nand->ecc.mode = NAND_ECC_HW;
@@ -786,11 +774,26 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
                nand->ecc.mode = NAND_ECC_SOFT;
        }
 
+       ret = nand_scan_ident(mtd, 1, NULL);
+       if (ret)
+               return ret;
+
        /* Large-page-specific setup */
-       if (or & OR_FCM_PGS) {
+       if (mtd->writesize == 2048) {
+               setbits_be32(&elbc_ctrl->regs->bank[priv->bank].or,
+                            OR_FCM_PGS);
+               in_be32(&elbc_ctrl->regs->bank[priv->bank].or);
+
                priv->page_size = 1;
                nand->badblock_pattern = &largepage_memorybased;
 
+               /*
+                * Hardware expects small page has ECCM0, large page has
+                * ECCM1 when booting from NAND, and we follow that even
+                * when not booting from NAND.
+                */
+               priv->fmr |= FMR_ECCM;
+
                /* adjust ecc setup if needed */
                if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
                        nand->ecc.steps = 4;
@@ -798,12 +801,14 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
                                           &fsl_elbc_oob_lp_eccm1 :
                                           &fsl_elbc_oob_lp_eccm0;
                }
+       } else if (mtd->writesize == 512) {
+               clrbits_be32(&elbc_ctrl->regs->bank[priv->bank].or,
+                            OR_FCM_PGS);
+               in_be32(&elbc_ctrl->regs->bank[priv->bank].or);
+       } else {
+               return -ENODEV;
        }
 
-       ret = nand_scan_ident(mtd, 1, NULL);
-       if (ret)
-               return ret;
-
        ret = nand_scan_tail(mtd);
        if (ret)
                return ret;