#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 0
#endif
#define MXS_NAND_METADATA_SIZE 10
-
+#define MXS_NAND_BITS_PER_ECC_LEVEL 13
#define MXS_NAND_COMMAND_BUFFER_SIZE 32
#define MXS_NAND_BCH_TIMEOUT 10000
};
struct nand_ecclayout fake_ecc_layout;
+static int chunk_data_size = MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+static int galois_field = 13;
/*
* Cache management functions
static uint32_t mxs_nand_ecc_chunk_cnt(uint32_t page_data_size)
{
- return page_data_size / MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+ return page_data_size / chunk_data_size;
}
static uint32_t mxs_nand_ecc_size_in_bits(uint32_t ecc_strength)
{
- return ecc_strength * 13;
+ return ecc_strength * galois_field;
}
static uint32_t mxs_nand_aux_status_offset(void)
static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size,
uint32_t page_oob_size)
{
- if (page_data_size == 2048) {
- if (page_oob_size == 64)
- return 8;
-
- if (page_oob_size == 112)
- return 14;
- }
+ int ecc_strength;
+ int max_ecc_strength_supported;
- if (page_data_size == 4096) {
- if (page_oob_size == 128)
- return 8;
-
- if (page_oob_size == 218)
- return 16;
+ /* Refer to Chapter 17 for i.MX6DQ, Chapter 18 for i.MX6SX */
+ if (is_cpu_type(MXC_CPU_MX6SX))
+ max_ecc_strength_supported = 62;
+ else
+ max_ecc_strength_supported = 40;
- if (page_oob_size == 224)
- return 16;
- }
+ /*
+ * Determine the ECC layout with the formula:
+ * ECC bits per chunk = (total page spare data bits) /
+ * (bits per ECC level) / (chunks per page)
+ * where:
+ * total page spare data bits =
+ * (page oob size - meta data size) * (bits per byte)
+ */
+ ecc_strength = ((page_oob_size - MXS_NAND_METADATA_SIZE) * 8)
+ / (galois_field *
+ mxs_nand_ecc_chunk_cnt(page_data_size));
- return 0;
+ return min(round_down(ecc_strength, 2), max_ecc_strength_supported);
}
static inline uint32_t mxs_nand_get_mark_offset(uint32_t page_data_size,
uint32_t block_mark_chunk_bit_offset;
uint32_t block_mark_bit_offset;
- chunk_data_size_in_bits = MXS_NAND_CHUNK_DATA_CHUNK_SIZE * 8;
+ chunk_data_size_in_bits = chunk_data_size * 8;
chunk_ecc_size_in_bits = mxs_nand_ecc_size_in_bits(ecc_strength);
chunk_total_size_in_bits =
mxs_dma_desc_append(channel, d);
+ /* Invalidate caches */
+ mxs_nand_inval_data_buf(nand_info);
+
/* Execute the DMA chain. */
ret = mxs_dma_go(channel);
if (ret) {
d->cmd.data =
MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ |
MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END |
- (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+ (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
(length << MXS_DMA_DESC_BYTES_OFFSET);
d->cmd.address = (dma_addr_t)nand_info->data_buf;
mxs_dma_desc_append(channel, d);
+ /* Invalidate caches */
+ mxs_nand_inval_data_buf(nand_info);
+
/* Execute the DMA chain. */
ret = mxs_dma_go(channel);
if (ret) {
struct mxs_bch_regs *bch_regs = (struct mxs_bch_regs *)MXS_BCH_BASE;
uint32_t tmp;
+ if (mtd->oobsize > MXS_NAND_CHUNK_DATA_CHUNK_SIZE) {
+ galois_field = 14;
+ chunk_data_size = MXS_NAND_CHUNK_DATA_CHUNK_SIZE * 2;
+ }
+
+ if (mtd->oobsize > chunk_data_size) {
+ printf("Not support the NAND chips whose oob size is larger then %d bytes!\n", chunk_data_size);
+ return -EINVAL;
+ }
+
/* Configure BCH and set NFC geometry */
mxs_reset_block(&bch_regs->hw_bch_ctrl_reg);
tmp |= MXS_NAND_METADATA_SIZE << BCH_FLASHLAYOUT0_META_SIZE_OFFSET;
tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
<< BCH_FLASHLAYOUT0_ECC0_OFFSET;
- tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE
- >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
+ tmp |= chunk_data_size >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
+ tmp |= (14 == galois_field ? 1 : 0) <<
+ BCH_FLASHLAYOUT0_GF13_0_GF14_1_OFFSET;
writel(tmp, &bch_regs->hw_bch_flash0layout0);
tmp = (mtd->writesize + mtd->oobsize)
<< BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET;
tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
<< BCH_FLASHLAYOUT1_ECCN_OFFSET;
- tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE
- >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
+ tmp |= chunk_data_size >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
+ tmp |= (14 == galois_field ? 1 : 0) <<
+ BCH_FLASHLAYOUT1_GF13_0_GF14_1_OFFSET;
writel(tmp, &bch_regs->hw_bch_flash0layout1);
/* Set *all* chip selects to use layout 0 */