*
*/
-/* XXX U-BOOT XXX */
-#if 0
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/compatmac.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/leds.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-
-#endif
-
#include <common.h>
#define ENOTSUPP 524 /* Operation is not supported */
#include <asm/io.h>
#include <asm/errno.h>
-#ifdef CONFIG_JFFS2_NAND
-#include <jffs2/jffs2.h>
-#endif
-
/*
* CONFIG_SYS_NAND_RESET_CNT is used as a timeout mechanism when resetting
* a flash. NAND flash is initialized prior to interrupts so standard timers
static int nand_wait(struct mtd_info *mtd, struct nand_chip *this);
-/*
- * For devices which display every fart in the system on a separate LED. Is
- * compiled away when LED support is disabled.
- */
-/* XXX U-BOOT XXX */
-#if 0
-DEFINE_LED_TRIGGER(nand_led_trigger);
-#endif
-
/**
* nand_release_device - [GENERIC] release chip
* @mtd: MTD device structure
*
* Deselect, release chip lock and wake up anyone waiting on the device
*/
-/* XXX U-BOOT XXX */
-#if 0
-static void nand_release_device(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- /* De-select the NAND device */
- chip->select_chip(mtd, -1);
-
- /* Release the controller and the chip */
- spin_lock(&chip->controller->lock);
- chip->controller->active = NULL;
- chip->state = FL_READY;
- wake_up(&chip->controller->wq);
- spin_unlock(&chip->controller->lock);
-}
-#else
static void nand_release_device (struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
this->select_chip(mtd, -1); /* De-select the NAND device */
}
-#endif
/**
* nand_read_byte - [DEFAULT] read one byte from the chip
* Wait for the ready pin, after a command
* The timeout is catched later.
*/
-/* XXX U-BOOT XXX */
-#if 0
-void nand_wait_ready(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
- unsigned long timeo = jiffies + 2;
-
- led_trigger_event(nand_led_trigger, LED_FULL);
- /* wait until command is processed or timeout occures */
- do {
- if (chip->dev_ready(mtd))
- break;
- touch_softlockup_watchdog();
- } while (time_before(jiffies, timeo));
- led_trigger_event(nand_led_trigger, LED_OFF);
-}
-EXPORT_SYMBOL_GPL(nand_wait_ready);
-#else
void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
break;
}
}
-#endif
/**
* nand_command - [DEFAULT] Send command to NAND device
*
* Get the device and lock it for exclusive access
*/
-/* XXX U-BOOT XXX */
-#if 0
-static int
-nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
-{
- spinlock_t *lock = &chip->controller->lock;
- wait_queue_head_t *wq = &chip->controller->wq;
- DECLARE_WAITQUEUE(wait, current);
- retry:
- spin_lock(lock);
-
- /* Hardware controller shared among independend devices */
- /* Hardware controller shared among independend devices */
- if (!chip->controller->active)
- chip->controller->active = chip;
-
- if (chip->controller->active == chip && chip->state == FL_READY) {
- chip->state = new_state;
- spin_unlock(lock);
- return 0;
- }
- if (new_state == FL_PM_SUSPENDED) {
- spin_unlock(lock);
- return (chip->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN;
- }
- set_current_state(TASK_UNINTERRUPTIBLE);
- add_wait_queue(wq, &wait);
- spin_unlock(lock);
- schedule();
- remove_wait_queue(wq, &wait);
- goto retry;
-}
-#else
static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state)
{
this->state = new_state;
return 0;
}
-#endif
/**
* nand_wait - [DEFAULT] wait until the command is done
* Erase can take up to 400ms and program up to 20ms according to
* general NAND and SmartMedia specs
*/
-/* XXX U-BOOT XXX */
-#if 0
-static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
-{
-
- unsigned long timeo = jiffies;
- int status, state = chip->state;
-
- if (state == FL_ERASING)
- timeo += (HZ * 400) / 1000;
- else
- timeo += (HZ * 20) / 1000;
-
- led_trigger_event(nand_led_trigger, LED_FULL);
-
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
- ndelay(100);
-
- if ((state == FL_ERASING) && (chip->options & NAND_IS_AND))
- chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
- else
- chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
-
- while (time_before(jiffies, timeo)) {
- if (chip->dev_ready) {
- if (chip->dev_ready(mtd))
- break;
- } else {
- if (chip->read_byte(mtd) & NAND_STATUS_READY)
- break;
- }
- cond_resched();
- }
- led_trigger_event(nand_led_trigger, LED_OFF);
-
- status = (int)chip->read_byte(mtd);
- return status;
-}
-#else
static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
{
unsigned long timeo;
return this->read_byte(mtd);
}
-#endif
/**
* nand_read_page_raw - [Intern] read raw page data without ecc
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
+ *
+ * Not for syndrome calculating ecc controllers, which use a special oob layout
*/
static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
return 0;
}
+/**
+ * nand_read_page_raw_syndrome - [Intern] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
+ *
+ * We need a special oob layout and handling even when OOB isn't used.
+ */
+static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page)
+{
+ int eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ uint8_t *oob = chip->oob_poi;
+ int steps, size;
+
+ for (steps = chip->ecc.steps; steps > 0; steps--) {
+ chip->read_buf(mtd, buf, eccsize);
+ buf += eccsize;
+
+ if (chip->ecc.prepad) {
+ chip->read_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ chip->read_buf(mtd, oob, eccbytes);
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->read_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ size = mtd->oobsize - (oob - chip->oob_poi);
+ if (size)
+ chip->read_buf(mtd, oob, size);
+
+ return 0;
+}
+
/**
* nand_read_page_swecc - [REPLACABLE] software ecc based page read function
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*/
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
* nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
* @mtd: mtd info structure
* @chip: nand chip info structure
- * @dataofs offset of requested data within the page
- * @readlen data length
- * @buf: buffer to store read data
+ * @data_offs: offset of requested data within the page
+ * @readlen: data length
+ * @bufpoi: buffer to store read data
*/
static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
{
int stat;
stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
- if (stat < 0)
+ if (stat == -1)
mtd->ecc_stats.failed++;
else
mtd->ecc_stats.corrected += stat;
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* Not for syndrome calculating ecc controllers which need a special oob layout
*/
int stat;
stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
- if (stat == -1)
+ if (stat < 0)
mtd->ecc_stats.failed++;
else
mtd->ecc_stats.corrected += stat;
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* Hardware ECC for large page chips, require OOB to be read first.
* For this ECC mode, the write_page method is re-used from ECC_HW.
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* The hw generator calculates the error syndrome automatically. Therefor
* we need a special oob layout and handling.
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: data buffer
+ *
+ * Not for syndrome calculating ecc controllers, which use a special oob layout
*/
static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
}
+/**
+ * nand_write_page_raw_syndrome - [Intern] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ *
+ * We need a special oob layout and handling even when ECC isn't checked.
+ */
+static void nand_write_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf)
+{
+ int eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ uint8_t *oob = chip->oob_poi;
+ int steps, size;
+
+ for (steps = chip->ecc.steps; steps > 0; steps--) {
+ chip->write_buf(mtd, buf, eccsize);
+ buf += eccsize;
+
+ if (chip->ecc.prepad) {
+ chip->write_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ chip->read_buf(mtd, oob, eccbytes);
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->write_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ size = mtd->oobsize - (oob - chip->oob_poi);
+ if (size)
+ chip->write_buf(mtd, oob, size);
+}
/**
* nand_write_page_swecc - [REPLACABLE] software ecc based page write function
* @mtd: mtd info structure
if (!writelen)
return 0;
- /* reject writes, which are not page aligned */
- if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
- printk(KERN_NOTICE "nand_write: "
- "Attempt to write not page aligned data\n");
- return -EINVAL;
- }
-
column = to & (mtd->writesize - 1);
subpage = column || (writelen & (mtd->writesize - 1));
return chip->block_markbad(mtd, ofs);
}
-/**
- * nand_suspend - [MTD Interface] Suspend the NAND flash
- * @mtd: MTD device structure
- */
-static int nand_suspend(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- return nand_get_device(chip, mtd, FL_PM_SUSPENDED);
-}
-
-/**
- * nand_resume - [MTD Interface] Resume the NAND flash
- * @mtd: MTD device structure
- */
-static void nand_resume(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (chip->state == FL_PM_SUSPENDED)
- nand_release_device(mtd);
- else
- printk(KERN_ERR "nand_resume() called for a chip which is not "
- "in suspended state\n");
-}
-
/*
* Set default functions
*/
chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
if (!chip->scan_bbt)
chip->scan_bbt = nand_default_bbt;
-
- if (!chip->controller) {
+ if (!chip->controller)
chip->controller = &chip->hwcontrol;
-
- /* XXX U-BOOT XXX */
-#if 0
- spin_lock_init(&chip->controller->lock);
- init_waitqueue_head(&chip->controller->wq);
-#endif
- }
-
}
/*
}
}
- if (!type)
+ if (!type) {
+ /* supress warning if there is no nand */
+ if (*maf_id != 0x00 && *maf_id != 0xff &&
+ dev_id != 0x00 && dev_id != 0xff)
+ printk(KERN_INFO "%s: unknown NAND device: "
+ "Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
+ __func__, *maf_id, dev_id);
return ERR_PTR(-ENODEV);
+ }
if (!mtd->name)
mtd->name = type->name;
chip->bbt_erase_shift = chip->phys_erase_shift =
ffs(mtd->erasesize) - 1;
if (chip->chipsize & 0xffffffff)
- chip->chip_shift = ffs(chip->chipsize) - 1;
+ chip->chip_shift = ffs((unsigned)chip->chipsize) - 1;
else
chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32)) + 31;
/**
* nand_scan_tail - [NAND Interface] Scan for the NAND device
* @mtd: MTD device structure
- * @maxchips: Number of chips to scan for
*
* This is the second phase of the normal nand_scan() function. It
* fills out all the uninitialized function pointers with the defaults
default:
printk(KERN_WARNING "No oob scheme defined for "
"oobsize %d\n", mtd->oobsize);
-/* BUG(); */
}
}
* check ECC mode, default to software if 3byte/512byte hardware ECC is
* selected and we have 256 byte pagesize fallback to software ECC
*/
- if (!chip->ecc.read_page_raw)
- chip->ecc.read_page_raw = nand_read_page_raw;
- if (!chip->ecc.write_page_raw)
- chip->ecc.write_page_raw = nand_write_page_raw;
switch (chip->ecc.mode) {
case NAND_ECC_HW_OOB_FIRST:
chip->ecc.read_page = nand_read_page_hwecc;
if (!chip->ecc.write_page)
chip->ecc.write_page = nand_write_page_hwecc;
+ if (!chip->ecc.read_page_raw)
+ chip->ecc.read_page_raw = nand_read_page_raw;
+ if (!chip->ecc.write_page_raw)
+ chip->ecc.write_page_raw = nand_write_page_raw;
if (!chip->ecc.read_oob)
chip->ecc.read_oob = nand_read_oob_std;
if (!chip->ecc.write_oob)
chip->ecc.read_page = nand_read_page_syndrome;
if (!chip->ecc.write_page)
chip->ecc.write_page = nand_write_page_syndrome;
+ if (!chip->ecc.read_page_raw)
+ chip->ecc.read_page_raw = nand_read_page_raw_syndrome;
+ if (!chip->ecc.write_page_raw)
+ chip->ecc.write_page_raw = nand_write_page_raw_syndrome;
if (!chip->ecc.read_oob)
chip->ecc.read_oob = nand_read_oob_syndrome;
if (!chip->ecc.write_oob)
chip->ecc.read_page = nand_read_page_swecc;
chip->ecc.read_subpage = nand_read_subpage;
chip->ecc.write_page = nand_write_page_swecc;
+ chip->ecc.read_page_raw = nand_read_page_raw;
+ chip->ecc.write_page_raw = nand_write_page_raw;
chip->ecc.read_oob = nand_read_oob_std;
chip->ecc.write_oob = nand_write_oob_std;
chip->ecc.size = 256;
chip->ecc.read_page = nand_read_page_raw;
chip->ecc.write_page = nand_write_page_raw;
chip->ecc.read_oob = nand_read_oob_std;
+ chip->ecc.read_page_raw = nand_read_page_raw;
+ chip->ecc.write_page_raw = nand_write_page_raw;
chip->ecc.write_oob = nand_write_oob_std;
chip->ecc.size = mtd->writesize;
chip->ecc.bytes = 0;
* the out of band area
*/
chip->ecc.layout->oobavail = 0;
- for (i = 0; chip->ecc.layout->oobfree[i].length; i++)
+ for (i = 0; chip->ecc.layout->oobfree[i].length
+ && i < ARRAY_SIZE(chip->ecc.layout->oobfree); i++)
chip->ecc.layout->oobavail +=
chip->ecc.layout->oobfree[i].length;
mtd->oobavail = chip->ecc.layout->oobavail;
break;
case 4:
case 8:
+ case 16:
mtd->subpage_sft = 2;
break;
}
mtd->sync = nand_sync;
mtd->lock = NULL;
mtd->unlock = NULL;
- mtd->suspend = nand_suspend;
- mtd->resume = nand_resume;
mtd->block_isbad = nand_block_isbad;
mtd->block_markbad = nand_block_markbad;
return 0;
}
-/* module_text_address() isn't exported, and it's mostly a pointless
- test if this is a module _anyway_ -- they'd have to try _really_ hard
- to call us from in-kernel code if the core NAND support is modular. */
-#ifdef MODULE
-#define caller_is_module() (1)
-#else
-#define caller_is_module() \
- module_text_address((unsigned long)__builtin_return_address(0))
-#endif
-
/**
* nand_scan - [NAND Interface] Scan for the NAND device
* @mtd: MTD device structure
{
int ret;
- /* Many callers got this wrong, so check for it for a while... */
- /* XXX U-BOOT XXX */
-#if 0
- if (!mtd->owner && caller_is_module()) {
- printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n");
- BUG();
- }
-#endif
-
ret = nand_scan_ident(mtd, maxchips);
if (!ret)
ret = nand_scan_tail(mtd);
/* Deregister partitions */
del_mtd_partitions(mtd);
#endif
- /* Deregister the device */
- /* XXX U-BOOT XXX */
-#if 0
- del_mtd_device(mtd);
-#endif
/* Free bad block table memory */
kfree(chip->bbt);
if (!(chip->options & NAND_OWN_BUFFERS))
kfree(chip->buffers);
}
-
-/* XXX U-BOOT XXX */
-#if 0
-EXPORT_SYMBOL_GPL(nand_scan);
-EXPORT_SYMBOL_GPL(nand_scan_ident);
-EXPORT_SYMBOL_GPL(nand_scan_tail);
-EXPORT_SYMBOL_GPL(nand_release);
-
-static int __init nand_base_init(void)
-{
- led_trigger_register_simple("nand-disk", &nand_led_trigger);
- return 0;
-}
-
-static void __exit nand_base_exit(void)
-{
- led_trigger_unregister_simple(nand_led_trigger);
-}
-
-module_init(nand_base_init);
-module_exit(nand_base_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
-MODULE_DESCRIPTION("Generic NAND flash driver code");
-#endif
projects / u-boot / blobdiff