*
*/
-#ifndef __UBOOT__
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/nand_bch.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/leds.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-#else
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <common.h>
#include <malloc.h>
#include <asm/io.h>
#include <asm/errno.h>
-/*
- * CONFIG_SYS_NAND_RESET_CNT is used as a timeout mechanism when resetting
- * a flash. NAND flash is initialized prior to interrupts so standard timers
- * can't be used. CONFIG_SYS_NAND_RESET_CNT should be set to a value
- * which is greater than (max NAND reset time / NAND status read time).
- * A conservative default of 200000 (500 us / 25 ns) is used as a default.
- */
-#ifndef CONFIG_SYS_NAND_RESET_CNT
-#define CONFIG_SYS_NAND_RESET_CNT 200000
-#endif
-
static bool is_module_text_address(unsigned long addr) {return 0;}
-#endif
/* Define default oob placement schemes for large and small page devices */
static struct nand_ecclayout nand_oob_8 = {
{
struct nand_chip *chip = mtd->priv;
-#ifndef __UBOOT__
- /* Release the controller and the chip */
- spin_lock(&chip->controller->lock);
- chip->controller->active = NULL;
- chip->state = FL_READY;
- wake_up(&chip->controller->wq);
- spin_unlock(&chip->controller->lock);
-#else
/* De-select the NAND device */
chip->select_chip(mtd, -1);
-#endif
}
/**
*
* Default read function for 8bit buswidth
*/
-#ifndef __UBOOT__
-static uint8_t nand_read_byte(struct mtd_info *mtd)
-#else
uint8_t nand_read_byte(struct mtd_info *mtd)
-#endif
{
struct nand_chip *chip = mtd->priv;
return readb(chip->IO_ADDR_R);
}
/**
- * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
* nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
* @mtd: MTD device structure
*
chip->write_buf(mtd, (uint8_t *)&word, 2);
}
-#if defined(__UBOOT__) && !defined(CONFIG_BLACKFIN)
+#if !defined(CONFIG_BLACKFIN)
static void iowrite8_rep(void *addr, const uint8_t *buf, int len)
{
int i;
*
* Default write function for 8bit buswidth.
*/
-#ifndef __UBOOT__
-static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-#else
void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-#endif
{
struct nand_chip *chip = mtd->priv;
*
* Default read function for 8bit buswidth.
*/
-#ifndef __UBOOT__
-static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-#else
void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-#endif
{
struct nand_chip *chip = mtd->priv;
ioread8_rep(chip->IO_ADDR_R, buf, len);
}
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-/**
- * nand_verify_buf - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
- *
- * Default verify function for 8bit buswidth.
- */
-static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-{
- int i;
- struct nand_chip *chip = mtd->priv;
-
- for (i = 0; i < len; i++)
- if (buf[i] != readb(chip->IO_ADDR_R))
- return -EFAULT;
- return 0;
-}
-
-/**
- * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
- *
- * Default verify function for 16bit buswidth.
- */
-static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
-{
- int i;
- struct nand_chip *chip = mtd->priv;
- u16 *p = (u16 *) buf;
- len >>= 1;
-
- for (i = 0; i < len; i++)
- if (p[i] != readw(chip->IO_ADDR_R))
- return -EFAULT;
-
- return 0;
-}
-#endif
-#endif
-
/**
* nand_write_buf16 - [DEFAULT] write buffer to chip
* @mtd: MTD device structure
*
* Default write function for 16bit buswidth.
*/
-#ifndef __UBOOT__
-static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
-#else
void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
-#endif
{
struct nand_chip *chip = mtd->priv;
u16 *p = (u16 *) buf;
*
* Default read function for 16bit buswidth.
*/
-#ifndef __UBOOT__
-static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
-#else
void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
-#endif
{
struct nand_chip *chip = mtd->priv;
u16 *p = (u16 *) buf;
uint8_t buf[2] = { 0, 0 };
int ret = 0, res, i = 0;
- ops.datbuf = NULL;
+ memset(&ops, 0, sizeof(ops));
ops.oobbuf = buf;
ops.ooboffs = chip->badblockpos;
if (chip->options & NAND_BUSWIDTH_16) {
return (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1;
}
+/**
+ * nand_block_isreserved - [GENERIC] Check if a block is marked reserved.
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ *
+ * Check if the block is marked as reserved.
+ */
+static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (!chip->bbt)
+ return 0;
+ /* Return info from the table */
+ return nand_isreserved_bbt(mtd, ofs);
+}
+
/**
* nand_block_checkbad - [GENERIC] Check if a block is marked bad
* @mtd: MTD device structure
{
struct nand_chip *chip = mtd->priv;
- if (!(chip->options & NAND_BBT_SCANNED)) {
+ if (!(chip->options & NAND_SKIP_BBTSCAN) &&
+ !(chip->options & NAND_BBT_SCANNED)) {
chip->options |= NAND_BBT_SCANNED;
chip->scan_bbt(mtd);
}
return nand_isbad_bbt(mtd, ofs, allowbbt);
}
-#ifndef __UBOOT__
-/**
- * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
- * @mtd: MTD device structure
- * @timeo: Timeout
- *
- * Helper function for nand_wait_ready used when needing to wait in interrupt
- * context.
- */
-static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
-{
- struct nand_chip *chip = mtd->priv;
- int i;
-
- /* Wait for the device to get ready */
- for (i = 0; i < timeo; i++) {
- if (chip->dev_ready(mtd))
- break;
- touch_softlockup_watchdog();
- mdelay(1);
- }
-}
-#endif
-
/* Wait for the ready pin, after a command. The timeout is caught later. */
void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
-#ifndef __UBOOT__
- unsigned long timeo = jiffies + msecs_to_jiffies(20);
-
- /* 400ms timeout */
- if (in_interrupt() || oops_in_progress)
- return panic_nand_wait_ready(mtd, 400);
-
- led_trigger_event(nand_led_trigger, LED_FULL);
- /* Wait until command is processed or timeout occurs */
- do {
- if (chip->dev_ready(mtd))
- break;
- touch_softlockup_watchdog();
- } while (time_before(jiffies, timeo));
- led_trigger_event(nand_led_trigger, LED_OFF);
-#else
u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
u32 time_start;
if (chip->dev_ready(mtd))
break;
}
-#endif
}
EXPORT_SYMBOL_GPL(nand_wait_ready);
+/**
+ * nand_wait_status_ready - [GENERIC] Wait for the ready status after commands.
+ * @mtd: MTD device structure
+ * @timeo: Timeout in ms
+ *
+ * Wait for status ready (i.e. command done) or timeout.
+ */
+static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo)
+{
+ register struct nand_chip *chip = mtd->priv;
+ u32 time_start;
+
+ timeo = (CONFIG_SYS_HZ * timeo) / 1000;
+ time_start = get_timer(0);
+ while (get_timer(time_start) < timeo) {
+ if ((chip->read_byte(mtd) & NAND_STATUS_READY))
+ break;
+ WATCHDOG_RESET();
+ }
+};
+
/**
* nand_command - [DEFAULT] Send command to NAND device
* @mtd: MTD device structure
{
register struct nand_chip *chip = mtd->priv;
int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
- uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT;
/* Write out the command to the device */
if (command == NAND_CMD_SEQIN) {
NAND_CTRL_CLE | NAND_CTRL_CHANGE);
chip->cmd_ctrl(mtd,
NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
- while (!(chip->read_byte(mtd) & NAND_STATUS_READY) &&
- (rst_sts_cnt--));
+ /* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+ nand_wait_status_ready(mtd, 250);
return;
/* This applies to read commands */
int column, int page_addr)
{
register struct nand_chip *chip = mtd->priv;
- uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT;
/* Emulate NAND_CMD_READOOB */
if (command == NAND_CMD_READOOB) {
/*
* Program and erase have their own busy handlers status, sequential
- * in, and deplete1 need no delay.
+ * in and status need no delay.
*/
switch (command) {
NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
chip->cmd_ctrl(mtd, NAND_CMD_NONE,
NAND_NCE | NAND_CTRL_CHANGE);
- while (!(chip->read_byte(mtd) & NAND_STATUS_READY) &&
- (rst_sts_cnt--));
+ /* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+ nand_wait_status_ready(mtd, 250);
return;
case NAND_CMD_RNDOUT:
nand_get_device(struct mtd_info *mtd, int new_state)
{
struct nand_chip *chip = mtd->priv;
-#ifndef __UBOOT__
- spinlock_t *lock = &chip->controller->lock;
- wait_queue_head_t *wq = &chip->controller->wq;
- DECLARE_WAITQUEUE(wait, current);
-retry:
- spin_lock(lock);
-
- /* Hardware controller shared among independent devices */
- if (!chip->controller->active)
- chip->controller->active = chip;
-
- if (chip->controller->active == chip && chip->state == FL_READY) {
- chip->state = new_state;
- spin_unlock(lock);
- return 0;
- }
- if (new_state == FL_PM_SUSPENDED) {
- if (chip->controller->active->state == FL_PM_SUSPENDED) {
- chip->state = FL_PM_SUSPENDED;
- spin_unlock(lock);
- return 0;
- }
- }
- set_current_state(TASK_UNINTERRUPTIBLE);
- add_wait_queue(wq, &wait);
- spin_unlock(lock);
- schedule();
- remove_wait_queue(wq, &wait);
- goto retry;
-#else
chip->state = new_state;
return 0;
-#endif
}
/**
chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
-#ifndef __UBOOT__
- if (in_interrupt() || oops_in_progress)
- panic_nand_wait(mtd, chip, timeo);
- else {
- timeo = jiffies + msecs_to_jiffies(timeo);
- while (time_before(jiffies, timeo)) {
- if (chip->dev_ready) {
- if (chip->dev_ready(mtd))
- break;
- } else {
- if (chip->read_byte(mtd) & NAND_STATUS_READY)
- break;
- }
- cond_resched();
- }
- }
-#else
u32 timer = (CONFIG_SYS_HZ * timeo) / 1000;
u32 time_start;
break;
}
}
-#endif
-#ifdef PPCHAMELON_NAND_TIMER_HACK
- time_start = get_timer(0);
- while (get_timer(time_start) < 10)
- ;
-#endif /* PPCHAMELON_NAND_TIMER_HACK */
led_trigger_event(nand_led_trigger, LED_OFF);
status = (int)chip->read_byte(mtd);
return status;
}
-#ifndef __UBOOT__
-/**
- * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- * @mtd: mtd info
- * @ofs: offset to start unlock from
- * @len: length to unlock
- * @invert: when = 0, unlock the range of blocks within the lower and
- * upper boundary address
- * when = 1, unlock the range of blocks outside the boundaries
- * of the lower and upper boundary address
- *
- * Returs unlock status.
- */
-static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
- uint64_t len, int invert)
-{
- int ret = 0;
- int status, page;
- struct nand_chip *chip = mtd->priv;
-
- /* Submit address of first page to unlock */
- page = ofs >> chip->page_shift;
- chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask);
-
- /* Submit address of last page to unlock */
- page = (ofs + len) >> chip->page_shift;
- chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1,
- (page | invert) & chip->pagemask);
-
- /* Call wait ready function */
- status = chip->waitfunc(mtd, chip);
- /* See if device thinks it succeeded */
- if (status & NAND_STATUS_FAIL) {
- pr_debug("%s: error status = 0x%08x\n",
- __func__, status);
- ret = -EIO;
- }
-
- return ret;
-}
-
-/**
- * nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- * @mtd: mtd info
- * @ofs: offset to start unlock from
- * @len: length to unlock
- *
- * Returns unlock status.
- */
-int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
- int ret = 0;
- int chipnr;
- struct nand_chip *chip = mtd->priv;
-
- pr_debug("%s: start = 0x%012llx, len = %llu\n",
- __func__, (unsigned long long)ofs, len);
-
- if (check_offs_len(mtd, ofs, len))
- ret = -EINVAL;
-
- /* Align to last block address if size addresses end of the device */
- if (ofs + len == mtd->size)
- len -= mtd->erasesize;
-
- nand_get_device(mtd, FL_UNLOCKING);
-
- /* Shift to get chip number */
- chipnr = ofs >> chip->chip_shift;
-
- chip->select_chip(mtd, chipnr);
-
- /* Check, if it is write protected */
- if (nand_check_wp(mtd)) {
- pr_debug("%s: device is write protected!\n",
- __func__);
- ret = -EIO;
- goto out;
- }
-
- ret = __nand_unlock(mtd, ofs, len, 0);
-
-out:
- chip->select_chip(mtd, -1);
- nand_release_device(mtd);
-
- return ret;
-}
-EXPORT_SYMBOL(nand_unlock);
-
-/**
- * nand_lock - [REPLACEABLE] locks all blocks present in the device
- * @mtd: mtd info
- * @ofs: offset to start unlock from
- * @len: length to unlock
- *
- * This feature is not supported in many NAND parts. 'Micron' NAND parts do
- * have this feature, but it allows only to lock all blocks, not for specified
- * range for block. Implementing 'lock' feature by making use of 'unlock', for
- * now.
- *
- * Returns lock status.
- */
-int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
- int ret = 0;
- int chipnr, status, page;
- struct nand_chip *chip = mtd->priv;
-
- pr_debug("%s: start = 0x%012llx, len = %llu\n",
- __func__, (unsigned long long)ofs, len);
-
- if (check_offs_len(mtd, ofs, len))
- ret = -EINVAL;
-
- nand_get_device(mtd, FL_LOCKING);
-
- /* Shift to get chip number */
- chipnr = ofs >> chip->chip_shift;
-
- chip->select_chip(mtd, chipnr);
-
- /* Check, if it is write protected */
- if (nand_check_wp(mtd)) {
- pr_debug("%s: device is write protected!\n",
- __func__);
- status = MTD_ERASE_FAILED;
- ret = -EIO;
- goto out;
- }
-
- /* Submit address of first page to lock */
- page = ofs >> chip->page_shift;
- chip->cmdfunc(mtd, NAND_CMD_LOCK, -1, page & chip->pagemask);
-
- /* Call wait ready function */
- status = chip->waitfunc(mtd, chip);
- /* See if device thinks it succeeded */
- if (status & NAND_STATUS_FAIL) {
- pr_debug("%s: error status = 0x%08x\n",
- __func__, status);
- ret = -EIO;
- goto out;
- }
-
- ret = __nand_unlock(mtd, ofs, len, 0x1);
-
-out:
- chip->select_chip(mtd, -1);
- nand_release_device(mtd);
-
- return ret;
-}
-EXPORT_SYMBOL(nand_lock);
-#endif
-
/**
* nand_read_page_raw - [INTERN] read raw page data without ecc
* @mtd: mtd info structure
* ecc.pos. Let's make sure that there are no gaps in ECC positions.
*/
for (i = 0; i < eccfrag_len - 1; i++) {
- if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
- eccpos[i + start_step * chip->ecc.bytes + 1]) {
+ if (eccpos[i + index] + 1 != eccpos[i + index + 1]) {
gaps = 1;
break;
}
mtd->oobavail : mtd->oobsize;
uint8_t *bufpoi, *oob, *buf;
+ int use_bufpoi;
unsigned int max_bitflips = 0;
int retry_mode = 0;
bool ecc_fail = false;
bytes = min(mtd->writesize - col, readlen);
aligned = (bytes == mtd->writesize);
+ if (!aligned)
+ use_bufpoi = 1;
+ else
+ use_bufpoi = 0;
+
/* Is the current page in the buffer? */
if (realpage != chip->pagebuf || oob) {
- bufpoi = aligned ? buf : chip->buffers->databuf;
+ bufpoi = use_bufpoi ? chip->buffers->databuf : buf;
+
+ if (use_bufpoi && aligned)
+ pr_debug("%s: using read bounce buffer for buf@%p\n",
+ __func__, buf);
read_retry:
chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
ret = chip->ecc.read_page(mtd, chip, bufpoi,
oob_required, page);
if (ret < 0) {
- if (!aligned)
+ if (use_bufpoi)
/* Invalidate page cache */
chip->pagebuf = -1;
break;
max_bitflips = max_t(unsigned int, max_bitflips, ret);
/* Transfer not aligned data */
- if (!aligned) {
+ if (use_bufpoi) {
if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
!(mtd->ecc_stats.failed - ecc_failures) &&
(ops->mode != MTD_OPS_RAW)) {
int ret;
nand_get_device(mtd, FL_READING);
+ memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = buf;
- ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_read_ops(mtd, from, &ops);
*retlen = ops.retlen;
static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
int page)
{
- uint8_t *buf = chip->oob_poi;
int length = mtd->oobsize;
int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
int eccsize = chip->ecc.size;
- uint8_t *bufpoi = buf;
+ uint8_t *bufpoi = chip->oob_poi;
int i, toread, sndrnd = 0, pos;
chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page);
/**
- * nand_write_subpage_hwecc - [REPLACABLE] hardware ECC based subpage write
+ * nand_write_subpage_hwecc - [REPLACEABLE] hardware ECC based subpage write
* @mtd: mtd info structure
* @chip: nand chip info structure
* @offset: column address of subpage within the page
status = chip->waitfunc(mtd, chip);
}
-
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
- /* Send command to read back the data */
- chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
-
- if (chip->verify_buf(mtd, buf, mtd->writesize))
- return -EIO;
-
- /* Make sure the next page prog is preceded by a status read */
- chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
-#endif
-#endif
-
return 0;
}
if (!writelen)
return 0;
-#ifndef __UBOOT__
- /* Reject writes, which are not page aligned */
- if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
-#else
/* Reject writes, which are not page aligned */
if (NOTALIGNED(to)) {
-#endif
pr_notice("%s: attempt to write non page aligned data\n",
__func__);
return -EINVAL;
blockmask = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
/* Invalidate the page cache, when we write to the cached page */
- if (to <= (chip->pagebuf << chip->page_shift) &&
- (chip->pagebuf << chip->page_shift) < (to + ops->len))
+ if (to <= ((loff_t)chip->pagebuf << chip->page_shift) &&
+ ((loff_t)chip->pagebuf << chip->page_shift) < (to + ops->len))
chip->pagebuf = -1;
/* Don't allow multipage oob writes with offset */
int bytes = mtd->writesize;
int cached = writelen > bytes && page != blockmask;
uint8_t *wbuf = buf;
+ int use_bufpoi;
+ int part_pagewr = (column || writelen < (mtd->writesize - 1));
+
+ if (part_pagewr)
+ use_bufpoi = 1;
+ else
+ use_bufpoi = 0;
WATCHDOG_RESET();
- /* Partial page write? */
- if (unlikely(column || writelen < (mtd->writesize - 1))) {
+ /* Partial page write?, or need to use bounce buffer */
+ if (use_bufpoi) {
+ pr_debug("%s: using write bounce buffer for buf@%p\n",
+ __func__, buf);
cached = 0;
- bytes = min_t(int, bytes - column, (int) writelen);
+ if (part_pagewr)
+ bytes = min_t(int, bytes - column, writelen);
chip->pagebuf = -1;
memset(chip->buffers->databuf, 0xff, mtd->writesize);
memcpy(&chip->buffers->databuf[column], buf, bytes);
/* Grab the device */
panic_nand_get_device(chip, mtd, FL_WRITING);
+ memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = (uint8_t *)buf;
- ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_write_ops(mtd, to, &ops);
int ret;
nand_get_device(mtd, FL_WRITING);
+ memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = (uint8_t *)buf;
- ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_write_ops(mtd, to, &ops);
*retlen = ops.retlen;
}
/**
- * single_erase_cmd - [GENERIC] NAND standard block erase command function
+ * single_erase - [GENERIC] NAND standard block erase command function
* @mtd: MTD device structure
* @page: the page address of the block which will be erased
*
- * Standard erase command for NAND chips.
+ * Standard erase command for NAND chips. Returns NAND status.
*/
-static void single_erase_cmd(struct mtd_info *mtd, int page)
+static int single_erase(struct mtd_info *mtd, int page)
{
struct nand_chip *chip = mtd->priv;
/* Send commands to erase a block */
chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+
+ return chip->waitfunc(mtd, chip);
}
/**
(page + pages_per_block))
chip->pagebuf = -1;
- chip->erase_cmd(mtd, page & chip->pagemask);
-
- status = chip->waitfunc(mtd, chip);
+ status = chip->erase(mtd, page & chip->pagemask);
/*
* See if operation failed and additional status checks are
return 0;
}
-#ifndef __UBOOT__
-/**
- * nand_suspend - [MTD Interface] Suspend the NAND flash
- * @mtd: MTD device structure
- */
-static int nand_suspend(struct mtd_info *mtd)
-{
- return nand_get_device(mtd, FL_PM_SUSPENDED);
-}
-
-/**
- * nand_resume - [MTD Interface] Resume the NAND flash
- * @mtd: MTD device structure
- */
-static void nand_resume(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (chip->state == FL_PM_SUSPENDED)
- nand_release_device(mtd);
- else
- pr_err("%s called for a chip which is not in suspended state\n",
- __func__);
-}
-#endif
-
/* Set default functions */
static void nand_set_defaults(struct nand_chip *chip, int busw)
{
chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;
if (!chip->scan_bbt)
chip->scan_bbt = nand_default_bbt;
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
- if (!chip->verify_buf)
- chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
-#endif
-#endif
if (!chip->controller) {
chip->controller = &chip->hwcontrol;
}
/* Sanitize ONFI strings so we can safely print them */
-#ifndef __UBOOT__
-static void sanitize_string(uint8_t *s, size_t len)
-#else
static void sanitize_string(char *s, size_t len)
-#endif
{
ssize_t i;
* Check the signature.
* Do not strictly follow the ONFI spec, maybe changed in future.
*/
-#ifndef __UBOOT__
- if (strncmp(ep->sig, "EPPS", 4)) {
-#else
if (strncmp((char *)ep->sig, "EPPS", 4)) {
-#endif
pr_debug("The signature is invalid.\n");
goto ext_out;
}
static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
struct nand_flash_dev *type, u8 *id_data, int *busw)
{
-#ifndef __UBOOT__
- if (!strncmp(type->id, id_data, type->id_len)) {
-#else
if (!strncmp((char *)type->id, (char *)id_data, type->id_len)) {
-#endif
mtd->writesize = type->pagesize;
mtd->erasesize = type->erasesize;
mtd->oobsize = type->oobsize;
chip->options |= type->options;
chip->ecc_strength_ds = NAND_ECC_STRENGTH(type);
chip->ecc_step_ds = NAND_ECC_STEP(type);
+ chip->onfi_timing_mode_default =
+ type->onfi_timing_mode_default;
*busw = type->options & NAND_BUSWIDTH_16;
chip->onfi_version = 0;
if (!type->name || !type->pagesize) {
- /* Check is chip is ONFI compliant */
+ /* Check if the chip is ONFI compliant */
if (nand_flash_detect_onfi(mtd, chip, &busw))
goto ident_done;
}
chip->badblockbits = 8;
- chip->erase_cmd = single_erase_cmd;
+ chip->erase = single_erase;
/* Do not replace user supplied command function! */
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
type->name);
#endif
- pr_info("%dMiB, %s, page size: %d, OOB size: %d\n",
+ pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n",
(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
- mtd->writesize, mtd->oobsize);
+ mtd->erasesize >> 10, mtd->writesize, mtd->oobsize);
return type;
}
}
EXPORT_SYMBOL(nand_scan_ident);
+/*
+ * Check if the chip configuration meet the datasheet requirements.
+
+ * If our configuration corrects A bits per B bytes and the minimum
+ * required correction level is X bits per Y bytes, then we must ensure
+ * both of the following are true:
+ *
+ * (1) A / B >= X / Y
+ * (2) A >= X
+ *
+ * Requirement (1) ensures we can correct for the required bitflip density.
+ * Requirement (2) ensures we can correct even when all bitflips are clumped
+ * in the same sector.
+ */
+static bool nand_ecc_strength_good(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int corr, ds_corr;
+
+ if (ecc->size == 0 || chip->ecc_step_ds == 0)
+ /* Not enough information */
+ return true;
+
+ /*
+ * We get the number of corrected bits per page to compare
+ * the correction density.
+ */
+ corr = (mtd->writesize * ecc->strength) / ecc->size;
+ ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds;
+
+ return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
+}
/**
* nand_scan_tail - [NAND Interface] Scan for the NAND device
!(chip->bbt_options & NAND_BBT_USE_FLASH));
if (!(chip->options & NAND_OWN_BUFFERS)) {
-#ifndef __UBOOT__
- nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
- + mtd->oobsize * 3, GFP_KERNEL);
- if (!nbuf)
- return -ENOMEM;
- nbuf->ecccalc = (uint8_t *)(nbuf + 1);
- nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
- nbuf->databuf = nbuf->ecccode + mtd->oobsize;
-#else
nbuf = kzalloc(sizeof(struct nand_buffers), GFP_KERNEL);
-#endif
-
chip->buffers = nbuf;
} else {
if (!chip->buffers)
case NAND_ECC_HW_OOB_FIRST:
/* Similar to NAND_ECC_HW, but a separate read_page handle */
if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
- pr_warn("No ECC functions supplied; "
- "hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; hardware ECC not possible\n");
BUG();
}
if (!ecc->read_page)
ecc->read_page == nand_read_page_hwecc ||
!ecc->write_page ||
ecc->write_page == nand_write_page_hwecc)) {
- pr_warn("No ECC functions supplied; "
- "hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; hardware ECC not possible\n");
BUG();
}
/* Use standard syndrome read/write page function? */
}
break;
}
- pr_warn("%d byte HW ECC not possible on "
- "%d byte page size, fallback to SW ECC\n",
- ecc->size, mtd->writesize);
+ pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
+ ecc->size, mtd->writesize);
ecc->mode = NAND_ECC_SOFT;
case NAND_ECC_SOFT:
ecc->read_oob = nand_read_oob_std;
ecc->write_oob = nand_write_oob_std;
/*
- * Board driver should supply ecc.size and ecc.bytes values to
- * select how many bits are correctable; see nand_bch_init()
- * for details. Otherwise, default to 4 bits for large page
- * devices.
+ * Board driver should supply ecc.size and ecc.strength values
+ * to select how many bits are correctable. Otherwise, default
+ * to 4 bits for large page devices.
*/
if (!ecc->size && (mtd->oobsize >= 64)) {
ecc->size = 512;
- ecc->bytes = 7;
+ ecc->strength = 4;
}
+
+ /* See nand_bch_init() for details. */
+ ecc->bytes = DIV_ROUND_UP(
+ ecc->strength * fls(8 * ecc->size), 8);
ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
&ecc->layout);
if (!ecc->priv) {
pr_warn("BCH ECC initialization failed!\n");
BUG();
}
- ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size);
break;
case NAND_ECC_NONE:
- pr_warn("NAND_ECC_NONE selected by board driver. "
- "This is not recommended!\n");
+ pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
ecc->read_page = nand_read_page_raw;
ecc->write_page = nand_write_page_raw;
ecc->read_oob = nand_read_oob_std;
ecc->layout->oobavail += ecc->layout->oobfree[i].length;
mtd->oobavail = ecc->layout->oobavail;
+ /* ECC sanity check: warn if it's too weak */
+ if (!nand_ecc_strength_good(mtd))
+ pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
+ mtd->name);
+
/*
* Set the number of read / write steps for one page depending on ECC
* mode.
chip->pagebuf = -1;
/* Large page NAND with SOFT_ECC should support subpage reads */
- if ((ecc->mode == NAND_ECC_SOFT) && (chip->page_shift > 9))
- chip->options |= NAND_SUBPAGE_READ;
+ switch (ecc->mode) {
+ case NAND_ECC_SOFT:
+ case NAND_ECC_SOFT_BCH:
+ if (chip->page_shift > 9)
+ chip->options |= NAND_SUBPAGE_READ;
+ break;
+
+ default:
+ break;
+ }
/* Fill in remaining MTD driver data */
mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH;
mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
MTD_CAP_NANDFLASH;
mtd->_erase = nand_erase;
-#ifndef __UBOOT__
- mtd->_point = NULL;
- mtd->_unpoint = NULL;
-#endif
mtd->_read = nand_read;
mtd->_write = nand_write;
mtd->_panic_write = panic_nand_write;
mtd->_sync = nand_sync;
mtd->_lock = NULL;
mtd->_unlock = NULL;
-#ifndef __UBOOT__
- mtd->_suspend = nand_suspend;
- mtd->_resume = nand_resume;
-#endif
+ mtd->_block_isreserved = nand_block_isreserved;
mtd->_block_isbad = nand_block_isbad;
mtd->_block_markbad = nand_block_markbad;
mtd->writebufsize = mtd->writesize;
* properly set.
*/
if (!mtd->bitflip_threshold)
- mtd->bitflip_threshold = mtd->ecc_strength;
-
- /* Check, if we should skip the bad block table scan */
- if (chip->options & NAND_SKIP_BBTSCAN)
- chip->options |= NAND_BBT_SCANNED;
+ mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4);
return 0;
}
}
EXPORT_SYMBOL(nand_scan);
-#ifndef __UBOOT__
-/**
- * nand_release - [NAND Interface] Free resources held by the NAND device
- * @mtd: MTD device structure
- */
-void nand_release(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (chip->ecc.mode == NAND_ECC_SOFT_BCH)
- nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
-
- mtd_device_unregister(mtd);
-
- /* Free bad block table memory */
- kfree(chip->bbt);
- if (!(chip->options & NAND_OWN_BUFFERS))
- kfree(chip->buffers);
-
- /* Free bad block descriptor memory */
- if (chip->badblock_pattern && chip->badblock_pattern->options
- & NAND_BBT_DYNAMICSTRUCT)
- kfree(chip->badblock_pattern);
-}
-EXPORT_SYMBOL_GPL(nand_release);
-
-static int __init nand_base_init(void)
-{
- led_trigger_register_simple("nand-disk", &nand_led_trigger);
- return 0;
-}
-
-static void __exit nand_base_exit(void)
-{
- led_trigger_unregister_simple(nand_led_trigger);
-}
-#endif
-
module_init(nand_base_init);
module_exit(nand_base_exit);