Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx

[u-boot] / drivers / mtd / nand / nand_spl_simple.c

diff --git a/drivers/mtd/nand/nand_spl_simple.c b/drivers/mtd/nand/nand_spl_simple.c
index 7eb08a3b089dfdfb9d031caba651fe62967fc540..4a4d02f4c8b5c1c4d95c8735a52862ab4c7fd4fe 100644 (file)
--- a/drivers/mtd/nand/nand_spl_simple.c
+++ b/drivers/mtd/nand/nand_spl_simple.c
@@ -27,6 +27,11 @@ static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS;
 static nand_info_t mtd;
 static struct nand_chip nand_chip;
 
+#define ECCSTEPS       (CONFIG_SYS_NAND_PAGE_SIZE / \
+                                       CONFIG_SYS_NAND_ECCSIZE)
+#define ECCTOTAL       (ECCSTEPS * CONFIG_SYS_NAND_ECCBYTES)
+
+
 #if (CONFIG_SYS_NAND_PAGE_SIZE <= 512)
 /*
  * NAND command for small page NAND devices (512)
@@ -145,29 +150,21 @@ static int nand_is_bad_block(int block)
 static int nand_read_page(int block, int page, uchar *dst)
 {
        struct nand_chip *this = mtd.priv;
-       u_char *ecc_calc;
-       u_char *ecc_code;
-       u_char *oob_data;
+       u_char ecc_calc[ECCTOTAL];
+       u_char ecc_code[ECCTOTAL];
+       u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
        int i;
        int eccsize = CONFIG_SYS_NAND_ECCSIZE;
        int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
-       int eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
+       int eccsteps = ECCSTEPS;
        uint8_t *p = dst;
 
-       /*
-        * No malloc available for now, just use some temporary locations
-        * in SDRAM
-        */
-       ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000);
-       ecc_code = ecc_calc + 0x100;
-       oob_data = ecc_calc + 0x200;
-
        nand_command(block, page, 0, NAND_CMD_READOOB);
        this->read_buf(&mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
        nand_command(block, page, 0, NAND_CMD_READ0);
 
        /* Pick the ECC bytes out of the oob data */
-       for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++)
+       for (i = 0; i < ECCTOTAL; i++)
                ecc_code[i] = oob_data[nand_ecc_pos[i]];
 
 
@@ -184,24 +181,17 @@ static int nand_read_page(int block, int page, uchar *dst)
 static int nand_read_page(int block, int page, void *dst)
 {
        struct nand_chip *this = mtd.priv;
-       u_char *ecc_calc;
-       u_char *ecc_code;
-       u_char *oob_data;
+       u_char ecc_calc[ECCTOTAL];
+       u_char ecc_code[ECCTOTAL];
+       u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
        int i;
        int eccsize = CONFIG_SYS_NAND_ECCSIZE;
        int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
-       int eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
+       int eccsteps = ECCSTEPS;
        uint8_t *p = dst;
 
        nand_command(block, page, 0, NAND_CMD_READ0);
 
-       /* No malloc available for now, just use some temporary locations
-        * in SDRAM
-        */
-       ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000);
-       ecc_code = ecc_calc + 0x100;
-       oob_data = ecc_calc + 0x200;
-
        for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
                if (this->ecc.mode != NAND_ECC_SOFT)
                        this->ecc.hwctl(&mtd, NAND_ECC_READ);
@@ -211,10 +201,10 @@ static int nand_read_page(int block, int page, void *dst)
        this->read_buf(&mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
 
        /* Pick the ECC bytes out of the oob data */
-       for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++)
+       for (i = 0; i < ECCTOTAL; i++)
                ecc_code[i] = oob_data[nand_ecc_pos[i]];
 
-       eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
+       eccsteps = ECCSTEPS;
        p = dst;
 
        for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {