* Copyright (C) 2008 Nokia Corporation: drop_ffs() function by
* Artem Bityutskiy <dedekind1@gmail.com> from mtd-utils
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
* Copyright 2010 Freescale Semiconductor
- * The portions of this file whose copyright is held by Freescale and which
- * are not considered a derived work of GPL v2-only code may be distributed
- * and/or modified under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
+ *
+ * SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <command.h>
#include <watchdog.h>
#include <malloc.h>
+#include <memalign.h>
#include <div64.h>
#include <asm/errno.h>
struct jffs2_unknown_node cleanmarker;
erase_info_t erase;
unsigned long erase_length, erased_length; /* in blocks */
- int bbtest = 1;
int result;
int percent_complete = -1;
const char *mtd_device = meminfo->name;
struct mtd_oob_ops oob_opts;
struct nand_chip *chip = meminfo->priv;
- if ((opts->offset & (meminfo->writesize - 1)) != 0) {
- printf("Attempt to erase non page-aligned data\n");
+ if ((opts->offset & (meminfo->erasesize - 1)) != 0) {
+ printf("Attempt to erase non block-aligned data\n");
return -1;
}
kfree(chip->bbt);
}
chip->bbt = NULL;
+ chip->options &= ~NAND_BBT_SCANNED;
}
for (erased_length = 0;
WATCHDOG_RESET();
- if (!opts->scrub && bbtest) {
- int ret = meminfo->block_isbad(meminfo, erase.addr);
+ if (opts->lim && (erase.addr >= (opts->offset + opts->lim))) {
+ puts("Size of erase exceeds limit\n");
+ return -EFBIG;
+ }
+ if (!opts->scrub) {
+ int ret = mtd_block_isbad(meminfo, erase.addr);
if (ret > 0) {
if (!opts->quiet)
printf("\rSkipping bad block at "
erased_length++;
- result = meminfo->erase(meminfo, &erase);
+ result = mtd_erase(meminfo, &erase);
if (result != 0) {
printf("\n%s: MTD Erase failure: %d\n",
mtd_device, result);
/* format for JFFS2 ? */
if (opts->jffs2 && chip->ecc.layout->oobavail >= 8) {
- chip->ops.ooblen = 8;
- chip->ops.datbuf = NULL;
- chip->ops.oobbuf = (uint8_t *)&cleanmarker;
- chip->ops.ooboffs = 0;
- chip->ops.mode = MTD_OOB_AUTO;
-
- result = meminfo->write_oob(meminfo,
- erase.addr,
- &chip->ops);
+ struct mtd_oob_ops ops;
+ ops.ooblen = 8;
+ ops.datbuf = NULL;
+ ops.oobbuf = (uint8_t *)&cleanmarker;
+ ops.ooboffs = 0;
+ ops.mode = MTD_OPS_AUTO_OOB;
+
+ result = mtd_write_oob(meminfo,
+ erase.addr,
+ &ops);
if (result != 0) {
printf("\n%s: MTD writeoob failure: %d\n",
mtd_device, result);
if (!opts->quiet)
printf("\n");
- if (opts->scrub)
- chip->scan_bbt(meminfo);
-
return 0;
}
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
+#define NAND_CMD_LOCK_TIGHT 0x2c
+#define NAND_CMD_LOCK_STATUS 0x7a
+
/******************************************************************************
* Support for locking / unlocking operations of some NAND devices
*****************************************************************************/
/* select the NAND device */
chip->select_chip(mtd, 0);
+ /* check the Lock Tight Status */
+ chip->cmdfunc(mtd, NAND_CMD_LOCK_STATUS, -1, 0);
+ if (chip->read_byte(mtd) & NAND_LOCK_STATUS_TIGHT) {
+ printf("nand_lock: Device is locked tight!\n");
+ ret = -1;
+ goto out;
+ }
+
chip->cmdfunc(mtd,
(tight ? NAND_CMD_LOCK_TIGHT : NAND_CMD_LOCK),
-1, -1);
ret = -1;
}
+ out:
/* de-select the NAND device */
chip->select_chip(mtd, -1);
return ret;
int page;
struct nand_chip *chip = mtd->priv;
- debug("nand_unlock%s: start: %08llx, length: %d!\n",
+ debug("nand_unlock%s: start: %08llx, length: %zd!\n",
allexcept ? " (allexcept)" : "", start, length);
/* select the NAND device */
goto out;
}
+ /* check the Lock Tight Status */
+ page = (int)(start >> chip->page_shift);
+ chip->cmdfunc(mtd, NAND_CMD_LOCK_STATUS, -1, page & chip->pagemask);
+ if (chip->read_byte(mtd) & NAND_LOCK_STATUS_TIGHT) {
+ printf("nand_unlock: Device is locked tight!\n");
+ ret = -1;
+ goto out;
+ }
+
if ((start & (mtd->erasesize - 1)) != 0) {
printf("nand_unlock: Start address must be beginning of "
"nand block!\n");
length -= mtd->erasesize;
/* submit address of first page to unlock */
- page = (int)(start >> chip->page_shift);
chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask);
/* submit ADDRESS of LAST page to unlock */
* @param nand NAND device
* @param offset offset in flash
* @param length image length
+ * @param used length of flash needed for the requested length
* @return 0 if the image fits and there are no bad blocks
* 1 if the image fits, but there are bad blocks
* -1 if the image does not fit
*/
-static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length)
+static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length,
+ size_t *used)
{
size_t len_excl_bad = 0;
int ret = 0;
ret = 1;
offset += block_len;
+ *used += block_len;
}
+ /* If the length is not a multiple of block_len, adjust. */
+ if (len_excl_bad > length)
+ *used -= (len_excl_bad - length);
+
return ret;
}
static size_t drop_ffs(const nand_info_t *nand, const u_char *buf,
const size_t *len)
{
- size_t i, l = *len;
+ size_t l = *len;
+ ssize_t i;
for (i = l - 1; i >= 0; i--)
if (buf[i] != 0xFF)
}
#endif
+/**
+ * nand_verify_page_oob:
+ *
+ * Verify a page of NAND flash, including the OOB.
+ * Reads page of NAND and verifies the contents and OOB against the
+ * values in ops.
+ *
+ * @param nand NAND device
+ * @param ops MTD operations, including data to verify
+ * @param ofs offset in flash
+ * @return 0 in case of success
+ */
+int nand_verify_page_oob(nand_info_t *nand, struct mtd_oob_ops *ops, loff_t ofs)
+{
+ int rval;
+ struct mtd_oob_ops vops;
+ size_t verlen = nand->writesize + nand->oobsize;
+
+ memcpy(&vops, ops, sizeof(vops));
+
+ vops.datbuf = memalign(ARCH_DMA_MINALIGN, verlen);
+
+ if (!vops.datbuf)
+ return -ENOMEM;
+
+ vops.oobbuf = vops.datbuf + nand->writesize;
+
+ rval = mtd_read_oob(nand, ofs, &vops);
+ if (!rval)
+ rval = memcmp(ops->datbuf, vops.datbuf, vops.len);
+ if (!rval)
+ rval = memcmp(ops->oobbuf, vops.oobbuf, vops.ooblen);
+
+ free(vops.datbuf);
+
+ return rval ? -EIO : 0;
+}
+
+/**
+ * nand_verify:
+ *
+ * Verify a region of NAND flash.
+ * Reads NAND in page-sized chunks and verifies the contents against
+ * the contents of a buffer. The offset into the NAND must be
+ * page-aligned, and the function doesn't handle skipping bad blocks.
+ *
+ * @param nand NAND device
+ * @param ofs offset in flash
+ * @param len buffer length
+ * @param buf buffer to read from
+ * @return 0 in case of success
+ */
+int nand_verify(nand_info_t *nand, loff_t ofs, size_t len, u_char *buf)
+{
+ int rval = 0;
+ size_t verofs;
+ size_t verlen = nand->writesize;
+ uint8_t *verbuf = memalign(ARCH_DMA_MINALIGN, verlen);
+
+ if (!verbuf)
+ return -ENOMEM;
+
+ /* Read the NAND back in page-size groups to limit malloc size */
+ for (verofs = ofs; verofs < ofs + len;
+ verofs += verlen, buf += verlen) {
+ verlen = min(nand->writesize, (uint32_t)(ofs + len - verofs));
+ rval = nand_read(nand, verofs, &verlen, verbuf);
+ if (!rval || (rval == -EUCLEAN))
+ rval = memcmp(buf, verbuf, verlen);
+
+ if (rval)
+ break;
+ }
+
+ free(verbuf);
+
+ return rval ? -EIO : 0;
+}
+
+
+
/**
* nand_write_skip_bad:
*
* Write image to NAND flash.
* Blocks that are marked bad are skipped and the is written to the next
* block instead as long as the image is short enough to fit even after
- * skipping the bad blocks.
+ * skipping the bad blocks. Due to bad blocks we may not be able to
+ * perform the requested write. In the case where the write would
+ * extend beyond the end of the NAND device, both length and actual (if
+ * not NULL) are set to 0. In the case where the write would extend
+ * beyond the limit we are passed, length is set to 0 and actual is set
+ * to the required length.
*
* @param nand NAND device
* @param offset offset in flash
* @param length buffer length
+ * @param actual set to size required to write length worth of
+ * buffer or 0 on error, if not NULL
+ * @param lim maximum size that actual may be in order to not
+ * exceed the buffer
* @param buffer buffer to read from
* @param flags flags modifying the behaviour of the write to NAND
* @return 0 in case of success
*/
int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
- u_char *buffer, int flags)
+ size_t *actual, loff_t lim, u_char *buffer, int flags)
{
int rval = 0, blocksize;
size_t left_to_write = *length;
+ size_t used_for_write = 0;
u_char *p_buffer = buffer;
int need_skip;
-#ifdef CONFIG_CMD_NAND_YAFFS
- if (flags & WITH_YAFFS_OOB) {
- if (flags & ~WITH_YAFFS_OOB)
- return -EINVAL;
-
- int pages;
- pages = nand->erasesize / nand->writesize;
- blocksize = (pages * nand->oobsize) + nand->erasesize;
- if (*length % (nand->writesize + nand->oobsize)) {
- printf("Attempt to write incomplete page"
- " in yaffs mode\n");
- return -EINVAL;
- }
- } else
-#endif
- {
- blocksize = nand->erasesize;
- }
+ if (actual)
+ *actual = 0;
+
+ blocksize = nand->erasesize;
/*
* nand_write() handles unaligned, partial page writes.
return -EINVAL;
}
- need_skip = check_skip_len(nand, offset, *length);
+ need_skip = check_skip_len(nand, offset, *length, &used_for_write);
+
+ if (actual)
+ *actual = used_for_write;
+
if (need_skip < 0) {
printf("Attempt to write outside the flash area\n");
*length = 0;
return -EINVAL;
}
+ if (used_for_write > lim) {
+ puts("Size of write exceeds partition or device limit\n");
+ *length = 0;
+ return -EFBIG;
+ }
+
if (!need_skip && !(flags & WITH_DROP_FFS)) {
rval = nand_write(nand, offset, length, buffer);
+
+ if ((flags & WITH_WR_VERIFY) && !rval)
+ rval = nand_verify(nand, offset, *length, buffer);
+
if (rval == 0)
return 0;
else
write_size = blocksize - block_offset;
-#ifdef CONFIG_CMD_NAND_YAFFS
- if (flags & WITH_YAFFS_OOB) {
- int page, pages;
- size_t pagesize = nand->writesize;
- size_t pagesize_oob = pagesize + nand->oobsize;
- struct mtd_oob_ops ops;
-
- ops.len = pagesize;
- ops.ooblen = nand->oobsize;
- ops.mode = MTD_OOB_AUTO;
- ops.ooboffs = 0;
-
- pages = write_size / pagesize_oob;
- for (page = 0; page < pages; page++) {
- WATCHDOG_RESET();
-
- ops.datbuf = p_buffer;
- ops.oobbuf = ops.datbuf + pagesize;
-
- rval = nand->write_oob(nand, offset, &ops);
- if (rval != 0)
- break;
-
- offset += pagesize;
- p_buffer += pagesize_oob;
- }
- }
- else
-#endif
- {
- truncated_write_size = write_size;
+ truncated_write_size = write_size;
#ifdef CONFIG_CMD_NAND_TRIMFFS
- if (flags & WITH_DROP_FFS)
- truncated_write_size = drop_ffs(nand, p_buffer,
- &write_size);
+ if (flags & WITH_DROP_FFS)
+ truncated_write_size = drop_ffs(nand, p_buffer,
+ &write_size);
#endif
- rval = nand_write(nand, offset, &truncated_write_size,
- p_buffer);
- offset += write_size;
- p_buffer += write_size;
- }
+ rval = nand_write(nand, offset, &truncated_write_size,
+ p_buffer);
+
+ if ((flags & WITH_WR_VERIFY) && !rval)
+ rval = nand_verify(nand, offset,
+ truncated_write_size, p_buffer);
+
+ offset += write_size;
+ p_buffer += write_size;
if (rval != 0) {
printf("NAND write to offset %llx failed %d\n",
*
* Read image from NAND flash.
* Blocks that are marked bad are skipped and the next block is read
- * instead as long as the image is short enough to fit even after skipping the
- * bad blocks.
+ * instead as long as the image is short enough to fit even after
+ * skipping the bad blocks. Due to bad blocks we may not be able to
+ * perform the requested read. In the case where the read would extend
+ * beyond the end of the NAND device, both length and actual (if not
+ * NULL) are set to 0. In the case where the read would extend beyond
+ * the limit we are passed, length is set to 0 and actual is set to the
+ * required length.
*
* @param nand NAND device
* @param offset offset in flash
* @param length buffer length, on return holds number of read bytes
+ * @param actual set to size required to read length worth of buffer or 0
+ * on error, if not NULL
+ * @param lim maximum size that actual may be in order to not exceed the
+ * buffer
* @param buffer buffer to write to
* @return 0 in case of success
*/
int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
- u_char *buffer)
+ size_t *actual, loff_t lim, u_char *buffer)
{
int rval;
size_t left_to_read = *length;
+ size_t used_for_read = 0;
u_char *p_buffer = buffer;
int need_skip;
if ((offset & (nand->writesize - 1)) != 0) {
printf("Attempt to read non page-aligned data\n");
*length = 0;
+ if (actual)
+ *actual = 0;
return -EINVAL;
}
- need_skip = check_skip_len(nand, offset, *length);
+ need_skip = check_skip_len(nand, offset, *length, &used_for_read);
+
+ if (actual)
+ *actual = used_for_read;
+
if (need_skip < 0) {
printf("Attempt to read outside the flash area\n");
*length = 0;
return -EINVAL;
}
+ if (used_for_read > lim) {
+ puts("Size of read exceeds partition or device limit\n");
+ *length = 0;
+ return -EFBIG;
+ }
+
if (!need_skip) {
rval = nand_read(nand, offset, length, buffer);
if (!rval || rval == -EUCLEAN)
return 0;
}
+
+#ifdef CONFIG_CMD_NAND_TORTURE
+
+/**
+ * check_pattern:
+ *
+ * Check if buffer contains only a certain byte pattern.
+ *
+ * @param buf buffer to check
+ * @param patt the pattern to check
+ * @param size buffer size in bytes
+ * @return 1 if there are only patt bytes in buf
+ * 0 if something else was found
+ */
+static int check_pattern(const u_char *buf, u_char patt, int size)
+{
+ int i;
+
+ for (i = 0; i < size; i++)
+ if (buf[i] != patt)
+ return 0;
+ return 1;
+}
+
+/**
+ * nand_torture:
+ *
+ * Torture a block of NAND flash.
+ * This is useful to determine if a block that caused a write error is still
+ * good or should be marked as bad.
+ *
+ * @param nand NAND device
+ * @param offset offset in flash
+ * @return 0 if the block is still good
+ */
+int nand_torture(nand_info_t *nand, loff_t offset)
+{
+ u_char patterns[] = {0xa5, 0x5a, 0x00};
+ struct erase_info instr = {
+ .mtd = nand,
+ .addr = offset,
+ .len = nand->erasesize,
+ };
+ size_t retlen;
+ int err, ret = -1, i, patt_count;
+ u_char *buf;
+
+ if ((offset & (nand->erasesize - 1)) != 0) {
+ puts("Attempt to torture a block at a non block-aligned offset\n");
+ return -EINVAL;
+ }
+
+ if (offset + nand->erasesize > nand->size) {
+ puts("Attempt to torture a block outside the flash area\n");
+ return -EINVAL;
+ }
+
+ patt_count = ARRAY_SIZE(patterns);
+
+ buf = malloc_cache_aligned(nand->erasesize);
+ if (buf == NULL) {
+ puts("Out of memory for erase block buffer\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < patt_count; i++) {
+ err = nand->erase(nand, &instr);
+ if (err) {
+ printf("%s: erase() failed for block at 0x%llx: %d\n",
+ nand->name, instr.addr, err);
+ goto out;
+ }
+
+ /* Make sure the block contains only 0xff bytes */
+ err = nand->read(nand, offset, nand->erasesize, &retlen, buf);
+ if ((err && err != -EUCLEAN) || retlen != nand->erasesize) {
+ printf("%s: read() failed for block at 0x%llx: %d\n",
+ nand->name, instr.addr, err);
+ goto out;
+ }
+
+ err = check_pattern(buf, 0xff, nand->erasesize);
+ if (!err) {
+ printf("Erased block at 0x%llx, but a non-0xff byte was found\n",
+ offset);
+ ret = -EIO;
+ goto out;
+ }
+
+ /* Write a pattern and check it */
+ memset(buf, patterns[i], nand->erasesize);
+ err = nand->write(nand, offset, nand->erasesize, &retlen, buf);
+ if (err || retlen != nand->erasesize) {
+ printf("%s: write() failed for block at 0x%llx: %d\n",
+ nand->name, instr.addr, err);
+ goto out;
+ }
+
+ err = nand->read(nand, offset, nand->erasesize, &retlen, buf);
+ if ((err && err != -EUCLEAN) || retlen != nand->erasesize) {
+ printf("%s: read() failed for block at 0x%llx: %d\n",
+ nand->name, instr.addr, err);
+ goto out;
+ }
+
+ err = check_pattern(buf, patterns[i], nand->erasesize);
+ if (!err) {
+ printf("Pattern 0x%.2x checking failed for block at "
+ "0x%llx\n", patterns[i], offset);
+ ret = -EIO;
+ goto out;
+ }
+ }
+
+ ret = 0;
+
+out:
+ free(buf);
+ return ret;
+}
+
+#endif