sunxi: prepare for sharing MACH_SUN8I_H3 config symbol

[u-boot] / drivers / mtd / spi / Kconfig

diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index 80fe93ee21d8146c9d0b03e9c3e243fc6469eb6e..5ca0a712d84a466e1a30002adf57418b80fbaee0 100644 (file)
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -34,6 +34,88 @@ config SPI_FLASH
 
          If unsure, say N
 
+config SPI_FLASH_BAR
+       bool "SPI flash Bank/Extended address register support"
+       depends on SPI_FLASH
+       help
+         Enable the SPI flash Bank/Extended address register support.
+         Bank/Extended address registers are used to access the flash
+         which has size > 16MiB in 3-byte addressing.
+
+if SPI_FLASH
+
+config SPI_FLASH_ATMEL
+       bool "Atmel SPI flash support"
+       help
+         Add support for various Atmel SPI flash chips (AT45xxx and AT25xxx)
+
+config SPI_FLASH_EON
+       bool "EON SPI flash support"
+       help
+         Add support for various EON SPI flash chips (EN25xxx)
+
+config SPI_FLASH_GIGADEVICE
+       bool "GigaDevice SPI flash support"
+       help
+         Add support for various GigaDevice SPI flash chips (GD25xxx)
+
+config SPI_FLASH_MACRONIX
+       bool "Macronix SPI flash support"
+       help
+         Add support for various Macronix SPI flash chips (MX25Lxxx)
+
+config SPI_FLASH_SPANSION
+       bool "Spansion SPI flash support"
+       help
+         Add support for various Spansion SPI flash chips (S25FLxxx)
+
+config SPI_FLASH_STMICRO
+       bool "STMicro SPI flash support"
+       help
+         Add support for various STMicro SPI flash chips (M25Pxxx and N25Qxxx)
+
+config SPI_FLASH_SST
+       bool "SST SPI flash support"
+       help
+         Add support for various SST SPI flash chips (SST25xxx)
+
+config SPI_FLASH_WINBOND
+       bool "Winbond SPI flash support"
+       help
+         Add support for various Winbond SPI flash chips (W25xxx)
+
+endif
+
+config SPI_FLASH_USE_4K_SECTORS
+       bool "Use small 4096 B erase sectors"
+       depends on SPI_FLASH
+       default y
+       help
+         Many flash memories support erasing small (4096 B) sectors. Depending
+         on the usage this feature may provide performance gain in comparison
+         to erasing whole blocks (32/64 KiB).
+         Changing a small part of the flash's contents is usually faster with
+         small sectors. On the other hand erasing should be faster when using
+         64 KiB block instead of 16 × 4 KiB sectors.
+
+         Please note that some tools/drivers/filesystems may not work with
+         4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
+
+config SPI_FLASH_DATAFLASH
+       bool "AT45xxx DataFlash support"
+       depends on SPI_FLASH && DM_SPI_FLASH
+       help
+         Enable the access for SPI-flash-based AT45xxx DataFlash chips.
+         DataFlash is a kind of SPI flash. Most AT45 chips have two buffers
+         in each chip, which may be used for double buffered I/O; but this
+         driver doesn't (yet) use these for any kind of i/o overlap or prefetching.
+
+         Sometimes DataFlash is packaged in MMC-format cards, although the
+         MMC stack can't (yet?) distinguish between MMC and DataFlash
+         protocols during enumeration.
+
+         If unsure, say N
+
 config SPI_FLASH_MTD
        bool "SPI Flash MTD support"
        depends on SPI_FLASH
@@ -46,4 +128,16 @@ config SPI_FLASH_MTD
 
          If unsure, say N
 
+if SPL
+
+config SPL_SPI_SUNXI
+       bool "Support for SPI Flash on Allwinner SoCs in SPL"
+       depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I
+       ---help---
+       Enable support for SPI Flash. This option allows SPL to read from
+       sunxi SPI Flash. It uses the same method as the boot ROM, so does
+       not need any extra configuration.
+
+endif
+
 endmenu # menu "SPI Flash Support"