+// SPDX-License-Identifier: GPL-2.0+
/*
- * SPI flash interface
+ * SPI Flash Core
*
- * Copyright (C) 2008 Atmel Corporation
+ * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
+ * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
* Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
- *
- * Licensed under the GPL-2 or later.
+ * Copyright (C) 2008 Atmel Corporation
*/
#include <common.h>
-#include <fdtdec.h>
+#include <errno.h>
#include <malloc.h>
+#include <mapmem.h>
#include <spi.h>
#include <spi_flash.h>
-#include <watchdog.h>
-
-#include "spi_flash_internal.h"
+#include <linux/log2.h>
+#include <linux/sizes.h>
+#include <dma.h>
-DECLARE_GLOBAL_DATA_PTR;
+#include "sf_internal.h"
static void spi_flash_addr(u32 addr, u8 *cmd)
{
cmd[3] = addr >> 0;
}
-static int spi_flash_read_write(struct spi_slave *spi,
- const u8 *cmd, size_t cmd_len,
- const u8 *data_out, u8 *data_in,
- size_t data_len)
+static int read_sr(struct spi_flash *flash, u8 *rs)
+{
+ int ret;
+ u8 cmd;
+
+ cmd = CMD_READ_STATUS;
+ ret = spi_flash_read_common(flash, &cmd, 1, rs, 1);
+ if (ret < 0) {
+ debug("SF: fail to read status register\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int read_fsr(struct spi_flash *flash, u8 *fsr)
+{
+ int ret;
+ const u8 cmd = CMD_FLAG_STATUS;
+
+ ret = spi_flash_read_common(flash, &cmd, 1, fsr, 1);
+ if (ret < 0) {
+ debug("SF: fail to read flag status register\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int write_sr(struct spi_flash *flash, u8 ws)
{
- unsigned long flags = SPI_XFER_BEGIN;
+ u8 cmd;
int ret;
- if (data_len == 0)
- flags |= SPI_XFER_END;
+ cmd = CMD_WRITE_STATUS;
+ ret = spi_flash_write_common(flash, &cmd, 1, &ws, 1);
+ if (ret < 0) {
+ debug("SF: fail to write status register\n");
+ return ret;
+ }
- ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
+ return 0;
+}
+
+#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
+static int read_cr(struct spi_flash *flash, u8 *rc)
+{
+ int ret;
+ u8 cmd;
+
+ cmd = CMD_READ_CONFIG;
+ ret = spi_flash_read_common(flash, &cmd, 1, rc, 1);
+ if (ret < 0) {
+ debug("SF: fail to read config register\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int write_cr(struct spi_flash *flash, u8 wc)
+{
+ u8 data[2];
+ u8 cmd;
+ int ret;
+
+ ret = read_sr(flash, &data[0]);
+ if (ret < 0)
+ return ret;
+
+ cmd = CMD_WRITE_STATUS;
+ data[1] = wc;
+ ret = spi_flash_write_common(flash, &cmd, 1, &data, 2);
if (ret) {
- debug("SF: Failed to send command (%zu bytes): %d\n",
- cmd_len, ret);
- } else if (data_len != 0) {
- ret = spi_xfer(spi, data_len * 8, data_out, data_in, SPI_XFER_END);
- if (ret)
- debug("SF: Failed to transfer %zu bytes of data: %d\n",
- data_len, ret);
+ debug("SF: fail to write config register\n");
+ return ret;
}
- return ret;
+ return 0;
}
+#endif
-int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len)
+#ifdef CONFIG_SPI_FLASH_BAR
+/*
+ * This "clean_bar" is necessary in a situation when one was accessing
+ * spi flash memory > 16 MiB by using Bank Address Register's BA24 bit.
+ *
+ * After it the BA24 bit shall be cleared to allow access to correct
+ * memory region after SW reset (by calling "reset" command).
+ *
+ * Otherwise, the BA24 bit may be left set and then after reset, the
+ * ROM would read/write/erase SPL from 16 MiB * bank_sel address.
+ */
+static int clean_bar(struct spi_flash *flash)
{
- return spi_flash_cmd_read(spi, &cmd, 1, response, len);
+ u8 cmd, bank_sel = 0;
+
+ if (flash->bank_curr == 0)
+ return 0;
+ cmd = flash->bank_write_cmd;
+
+ return spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1);
}
-int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
- size_t cmd_len, void *data, size_t data_len)
+static int write_bar(struct spi_flash *flash, u32 offset)
{
- return spi_flash_read_write(spi, cmd, cmd_len, NULL, data, data_len);
+ u8 cmd, bank_sel;
+ int ret;
+
+ bank_sel = offset / (SPI_FLASH_16MB_BOUN << flash->shift);
+ if (bank_sel == flash->bank_curr)
+ goto bar_end;
+
+ cmd = flash->bank_write_cmd;
+ ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1);
+ if (ret < 0) {
+ debug("SF: fail to write bank register\n");
+ return ret;
+ }
+
+bar_end:
+ flash->bank_curr = bank_sel;
+ return flash->bank_curr;
}
-int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
- const void *data, size_t data_len)
+static int read_bar(struct spi_flash *flash, const struct spi_flash_info *info)
{
- return spi_flash_read_write(spi, cmd, cmd_len, data, NULL, data_len);
+ u8 curr_bank = 0;
+ int ret;
+
+ if (flash->size <= SPI_FLASH_16MB_BOUN)
+ goto bar_end;
+
+ switch (JEDEC_MFR(info)) {
+ case SPI_FLASH_CFI_MFR_SPANSION:
+ flash->bank_read_cmd = CMD_BANKADDR_BRRD;
+ flash->bank_write_cmd = CMD_BANKADDR_BRWR;
+ break;
+ default:
+ flash->bank_read_cmd = CMD_EXTNADDR_RDEAR;
+ flash->bank_write_cmd = CMD_EXTNADDR_WREAR;
+ }
+
+ ret = spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
+ &curr_bank, 1);
+ if (ret) {
+ debug("SF: fail to read bank addr register\n");
+ return ret;
+ }
+
+bar_end:
+ flash->bank_curr = curr_bank;
+ return 0;
}
+#endif
-int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
- size_t len, const void *buf)
+#ifdef CONFIG_SF_DUAL_FLASH
+static void spi_flash_dual(struct spi_flash *flash, u32 *addr)
{
- unsigned long page_addr, byte_addr, page_size;
- size_t chunk_len, actual;
+ switch (flash->dual_flash) {
+ case SF_DUAL_STACKED_FLASH:
+ if (*addr >= (flash->size >> 1)) {
+ *addr -= flash->size >> 1;
+ flash->flags |= SNOR_F_USE_UPAGE;
+ } else {
+ flash->flags &= ~SNOR_F_USE_UPAGE;
+ }
+ break;
+ case SF_DUAL_PARALLEL_FLASH:
+ *addr >>= flash->shift;
+ break;
+ default:
+ debug("SF: Unsupported dual_flash=%d\n", flash->dual_flash);
+ break;
+ }
+}
+#endif
+
+static int spi_flash_sr_ready(struct spi_flash *flash)
+{
+ u8 sr;
int ret;
- u8 cmd[4];
- page_size = flash->page_size;
- page_addr = offset / page_size;
- byte_addr = offset % page_size;
+ ret = read_sr(flash, &sr);
+ if (ret < 0)
+ return ret;
+
+ return !(sr & STATUS_WIP);
+}
+
+static int spi_flash_fsr_ready(struct spi_flash *flash)
+{
+ u8 fsr;
+ int ret;
+
+ ret = read_fsr(flash, &fsr);
+ if (ret < 0)
+ return ret;
+
+ return fsr & STATUS_PEC;
+}
+
+static int spi_flash_ready(struct spi_flash *flash)
+{
+ int sr, fsr;
+
+ sr = spi_flash_sr_ready(flash);
+ if (sr < 0)
+ return sr;
+
+ fsr = 1;
+ if (flash->flags & SNOR_F_USE_FSR) {
+ fsr = spi_flash_fsr_ready(flash);
+ if (fsr < 0)
+ return fsr;
+ }
+
+ return sr && fsr;
+}
+
+static int spi_flash_wait_till_ready(struct spi_flash *flash,
+ unsigned long timeout)
+{
+ unsigned long timebase;
+ int ret;
+
+ timebase = get_timer(0);
+
+ while (get_timer(timebase) < timeout) {
+ ret = spi_flash_ready(flash);
+ if (ret < 0)
+ return ret;
+ if (ret)
+ return 0;
+ }
+
+ printf("SF: Timeout!\n");
+
+ return -ETIMEDOUT;
+}
+
+int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
+ size_t cmd_len, const void *buf, size_t buf_len)
+{
+ struct spi_slave *spi = flash->spi;
+ unsigned long timeout = SPI_FLASH_PROG_TIMEOUT;
+ int ret;
- ret = spi_claim_bus(flash->spi);
+ if (buf == NULL)
+ timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT;
+
+ ret = spi_claim_bus(spi);
if (ret) {
debug("SF: unable to claim SPI bus\n");
return ret;
}
- cmd[0] = CMD_PAGE_PROGRAM;
- for (actual = 0; actual < len; actual += chunk_len) {
- chunk_len = min(len - actual, page_size - byte_addr);
+ ret = spi_flash_cmd_write_enable(flash);
+ if (ret < 0) {
+ debug("SF: enabling write failed\n");
+ return ret;
+ }
- if (flash->spi->max_write_size)
- chunk_len = min(chunk_len, flash->spi->max_write_size);
+ ret = spi_flash_cmd_write(spi, cmd, cmd_len, buf, buf_len);
+ if (ret < 0) {
+ debug("SF: write cmd failed\n");
+ return ret;
+ }
- cmd[1] = page_addr >> 8;
- cmd[2] = page_addr;
- cmd[3] = byte_addr;
+ ret = spi_flash_wait_till_ready(flash, timeout);
+ if (ret < 0) {
+ debug("SF: write %s timed out\n",
+ timeout == SPI_FLASH_PROG_TIMEOUT ?
+ "program" : "page erase");
+ return ret;
+ }
- debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
- buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
+ spi_release_bus(spi);
+
+ return ret;
+}
+
+int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
+{
+ u32 erase_size, erase_addr;
+ u8 cmd[SPI_FLASH_CMD_LEN];
+ int ret = -1;
+
+ erase_size = flash->erase_size;
+ if (offset % erase_size || len % erase_size) {
+ printf("SF: Erase offset/length not multiple of erase size\n");
+ return -1;
+ }
+
+ if (flash->flash_is_locked) {
+ if (flash->flash_is_locked(flash, offset, len) > 0) {
+ printf("offset 0x%x is protected and cannot be erased\n",
+ offset);
+ return -EINVAL;
+ }
+ }
+
+ cmd[0] = flash->erase_cmd;
+ while (len) {
+ erase_addr = offset;
+
+#ifdef CONFIG_SF_DUAL_FLASH
+ if (flash->dual_flash > SF_SINGLE_FLASH)
+ spi_flash_dual(flash, &erase_addr);
+#endif
+#ifdef CONFIG_SPI_FLASH_BAR
+ ret = write_bar(flash, erase_addr);
+ if (ret < 0)
+ return ret;
+#endif
+ spi_flash_addr(erase_addr, cmd);
- ret = spi_flash_cmd_write_enable(flash);
+ debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
+ cmd[2], cmd[3], erase_addr);
+
+ ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0);
if (ret < 0) {
- debug("SF: enabling write failed\n");
+ debug("SF: erase failed\n");
break;
}
- ret = spi_flash_cmd_write(flash->spi, cmd, 4,
- buf + actual, chunk_len);
+ offset += erase_size;
+ len -= erase_size;
+ }
+
+#ifdef CONFIG_SPI_FLASH_BAR
+ ret = clean_bar(flash);
+#endif
+
+ return ret;
+}
+
+int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
+ size_t len, const void *buf)
+{
+ struct spi_slave *spi = flash->spi;
+ unsigned long byte_addr, page_size;
+ u32 write_addr;
+ size_t chunk_len, actual;
+ u8 cmd[SPI_FLASH_CMD_LEN];
+ int ret = -1;
+
+ page_size = flash->page_size;
+
+ if (flash->flash_is_locked) {
+ if (flash->flash_is_locked(flash, offset, len) > 0) {
+ printf("offset 0x%x is protected and cannot be written\n",
+ offset);
+ return -EINVAL;
+ }
+ }
+
+ cmd[0] = flash->write_cmd;
+ for (actual = 0; actual < len; actual += chunk_len) {
+ write_addr = offset;
+
+#ifdef CONFIG_SF_DUAL_FLASH
+ if (flash->dual_flash > SF_SINGLE_FLASH)
+ spi_flash_dual(flash, &write_addr);
+#endif
+#ifdef CONFIG_SPI_FLASH_BAR
+ ret = write_bar(flash, write_addr);
+ if (ret < 0)
+ return ret;
+#endif
+ byte_addr = offset % page_size;
+ chunk_len = min(len - actual, (size_t)(page_size - byte_addr));
+
+ if (spi->max_write_size)
+ chunk_len = min(chunk_len,
+ spi->max_write_size - sizeof(cmd));
+
+ spi_flash_addr(write_addr, cmd);
+
+ debug("SF: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
+ buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
+
+ ret = spi_flash_write_common(flash, cmd, sizeof(cmd),
+ buf + actual, chunk_len);
if (ret < 0) {
debug("SF: write failed\n");
break;
}
- ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
- if (ret)
- break;
-
- byte_addr += chunk_len;
- if (byte_addr == page_size) {
- page_addr++;
- byte_addr = 0;
- }
+ offset += chunk_len;
}
- debug("SF: program %s %zu bytes @ %#x\n",
- ret ? "failure" : "success", len, offset);
+#ifdef CONFIG_SPI_FLASH_BAR
+ ret = clean_bar(flash);
+#endif
- spi_release_bus(flash->spi);
return ret;
}
struct spi_slave *spi = flash->spi;
int ret;
- spi_claim_bus(spi);
+ ret = spi_claim_bus(spi);
+ if (ret) {
+ debug("SF: unable to claim SPI bus\n");
+ return ret;
+ }
+
ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len);
+ if (ret < 0) {
+ debug("SF: read cmd failed\n");
+ return ret;
+ }
+
spi_release_bus(spi);
return ret;
}
-int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
+/*
+ * TODO: remove the weak after all the other spi_flash_copy_mmap
+ * implementations removed from drivers
+ */
+void __weak spi_flash_copy_mmap(void *data, void *offset, size_t len)
+{
+#ifdef CONFIG_DMA
+ if (!dma_memcpy(data, offset, len))
+ return;
+#endif
+ memcpy(data, offset, len);
+}
+
+int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
size_t len, void *data)
{
- u8 cmd[5];
+ struct spi_slave *spi = flash->spi;
+ u8 *cmd, cmdsz;
+ u32 remain_len, read_len, read_addr;
+ int bank_sel = 0;
+ int ret = -1;
/* Handle memory-mapped SPI */
- if (flash->memory_map)
- memcpy(data, flash->memory_map + offset, len);
+ if (flash->memory_map) {
+ ret = spi_claim_bus(spi);
+ if (ret) {
+ debug("SF: unable to claim SPI bus\n");
+ return ret;
+ }
+ spi_xfer(spi, 0, NULL, NULL, SPI_XFER_MMAP);
+ spi_flash_copy_mmap(data, flash->memory_map + offset, len);
+ spi_xfer(spi, 0, NULL, NULL, SPI_XFER_MMAP_END);
+ spi_release_bus(spi);
+ return 0;
+ }
+
+ cmdsz = SPI_FLASH_CMD_LEN + flash->dummy_byte;
+ cmd = calloc(1, cmdsz);
+ if (!cmd) {
+ debug("SF: Failed to allocate cmd\n");
+ return -ENOMEM;
+ }
+
+ cmd[0] = flash->read_cmd;
+ while (len) {
+ read_addr = offset;
+
+#ifdef CONFIG_SF_DUAL_FLASH
+ if (flash->dual_flash > SF_SINGLE_FLASH)
+ spi_flash_dual(flash, &read_addr);
+#endif
+#ifdef CONFIG_SPI_FLASH_BAR
+ ret = write_bar(flash, read_addr);
+ if (ret < 0)
+ return ret;
+ bank_sel = flash->bank_curr;
+#endif
+ remain_len = ((SPI_FLASH_16MB_BOUN << flash->shift) *
+ (bank_sel + 1)) - offset;
+ if (len < remain_len)
+ read_len = len;
+ else
+ read_len = remain_len;
+
+ if (spi->max_read_size)
+ read_len = min(read_len, spi->max_read_size);
- cmd[0] = CMD_READ_ARRAY_FAST;
- spi_flash_addr(offset, cmd);
- cmd[4] = 0x00;
+ spi_flash_addr(read_addr, cmd);
- return spi_flash_read_common(flash, cmd, sizeof(cmd), data, len);
+ ret = spi_flash_read_common(flash, cmd, cmdsz, data, read_len);
+ if (ret < 0) {
+ debug("SF: read failed\n");
+ break;
+ }
+
+ offset += read_len;
+ len -= read_len;
+ data += read_len;
+ }
+
+#ifdef CONFIG_SPI_FLASH_BAR
+ ret = clean_bar(flash);
+#endif
+
+ free(cmd);
+ return ret;
}
-int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout,
- u8 cmd, u8 poll_bit)
+#ifdef CONFIG_SPI_FLASH_SST
+static bool sst26_process_bpr(u32 bpr_size, u8 *cmd, u32 bit, enum lock_ctl ctl)
{
- struct spi_slave *spi = flash->spi;
- unsigned long timebase;
+ switch (ctl) {
+ case SST26_CTL_LOCK:
+ cmd[bpr_size - (bit / 8) - 1] |= BIT(bit % 8);
+ break;
+ case SST26_CTL_UNLOCK:
+ cmd[bpr_size - (bit / 8) - 1] &= ~BIT(bit % 8);
+ break;
+ case SST26_CTL_CHECK:
+ return !!(cmd[bpr_size - (bit / 8) - 1] & BIT(bit % 8));
+ }
+
+ return false;
+}
+
+/*
+ * sst26wf016/sst26wf032/sst26wf064 have next block protection:
+ * 4x - 8 KByte blocks - read & write protection bits - upper addresses
+ * 1x - 32 KByte blocks - write protection bits
+ * rest - 64 KByte blocks - write protection bits
+ * 1x - 32 KByte blocks - write protection bits
+ * 4x - 8 KByte blocks - read & write protection bits - lower addresses
+ *
+ * We'll support only per 64k lock/unlock so lower and upper 64 KByte region
+ * will be treated as single block.
+ */
+
+/*
+ * Lock, unlock or check lock status of the flash region of the flash (depending
+ * on the lock_ctl value)
+ */
+static int sst26_lock_ctl(struct spi_flash *flash, u32 ofs, size_t len, enum lock_ctl ctl)
+{
+ u32 i, bpr_ptr, rptr_64k, lptr_64k, bpr_size;
+ bool lower_64k = false, upper_64k = false;
+ u8 cmd, bpr_buff[SST26_MAX_BPR_REG_LEN] = {};
int ret;
- u8 status;
- ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
- if (ret) {
- debug("SF: Failed to send command %02x: %d\n", cmd, ret);
+ /* Check length and offset for 64k alignment */
+ if ((ofs & (SZ_64K - 1)) || (len & (SZ_64K - 1)))
+ return -EINVAL;
+
+ if (ofs + len > flash->size)
+ return -EINVAL;
+
+ /* SST26 family has only 16 Mbit, 32 Mbit and 64 Mbit IC */
+ if (flash->size != SZ_2M &&
+ flash->size != SZ_4M &&
+ flash->size != SZ_8M)
+ return -EINVAL;
+
+ bpr_size = 2 + (flash->size / SZ_64K / 8);
+
+ cmd = SST26_CMD_READ_BPR;
+ ret = spi_flash_read_common(flash, &cmd, 1, bpr_buff, bpr_size);
+ if (ret < 0) {
+ printf("SF: fail to read block-protection register\n");
return ret;
}
- timebase = get_timer(0);
- do {
- WATCHDOG_RESET();
+ rptr_64k = min_t(u32, ofs + len , flash->size - SST26_BOUND_REG_SIZE);
+ lptr_64k = max_t(u32, ofs, SST26_BOUND_REG_SIZE);
- ret = spi_xfer(spi, 8, NULL, &status, 0);
- if (ret)
- return -1;
+ upper_64k = ((ofs + len) > (flash->size - SST26_BOUND_REG_SIZE));
+ lower_64k = (ofs < SST26_BOUND_REG_SIZE);
- if ((status & poll_bit) == 0)
- break;
+ /* Lower bits in block-protection register are about 64k region */
+ bpr_ptr = lptr_64k / SZ_64K - 1;
+
+ /* Process 64K blocks region */
+ while (lptr_64k < rptr_64k) {
+ if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
+ return EACCES;
+
+ bpr_ptr++;
+ lptr_64k += SZ_64K;
+ }
+
+ /* 32K and 8K region bits in BPR are after 64k region bits */
+ bpr_ptr = (flash->size - 2 * SST26_BOUND_REG_SIZE) / SZ_64K;
+
+ /* Process lower 32K block region */
+ if (lower_64k)
+ if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
+ return EACCES;
- } while (get_timer(timebase) < timeout);
+ bpr_ptr++;
- spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
+ /* Process upper 32K block region */
+ if (upper_64k)
+ if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
+ return EACCES;
- if ((status & poll_bit) == 0)
+ bpr_ptr++;
+
+ /* Process lower 8K block regions */
+ for (i = 0; i < SST26_BPR_8K_NUM; i++) {
+ if (lower_64k)
+ if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
+ return EACCES;
+
+ /* In 8K area BPR has both read and write protection bits */
+ bpr_ptr += 2;
+ }
+
+ /* Process upper 8K block regions */
+ for (i = 0; i < SST26_BPR_8K_NUM; i++) {
+ if (upper_64k)
+ if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
+ return EACCES;
+
+ /* In 8K area BPR has both read and write protection bits */
+ bpr_ptr += 2;
+ }
+
+ /* If we check region status we don't need to write BPR back */
+ if (ctl == SST26_CTL_CHECK)
return 0;
- /* Timed out */
- debug("SF: time out!\n");
- return -1;
+ cmd = SST26_CMD_WRITE_BPR;
+ ret = spi_flash_write_common(flash, &cmd, 1, bpr_buff, bpr_size);
+ if (ret < 0) {
+ printf("SF: fail to write block-protection register\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sst26_unlock(struct spi_flash *flash, u32 ofs, size_t len)
+{
+ return sst26_lock_ctl(flash, ofs, len, SST26_CTL_UNLOCK);
+}
+
+static int sst26_lock(struct spi_flash *flash, u32 ofs, size_t len)
+{
+ return sst26_lock_ctl(flash, ofs, len, SST26_CTL_LOCK);
}
-int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
+/*
+ * Returns EACCES (positive value) if region is locked, 0 if region is unlocked,
+ * and negative on errors.
+ */
+static int sst26_is_locked(struct spi_flash *flash, u32 ofs, size_t len)
{
- return spi_flash_cmd_poll_bit(flash, timeout,
- CMD_READ_STATUS, STATUS_WIP);
+ /*
+ * is_locked function is used for check before reading or erasing flash
+ * region, so offset and length might be not 64k allighned, so adjust
+ * them to be 64k allighned as sst26_lock_ctl works only with 64k
+ * allighned regions.
+ */
+ ofs -= ofs & (SZ_64K - 1);
+ len = len & (SZ_64K - 1) ? (len & ~(SZ_64K - 1)) + SZ_64K : len;
+
+ return sst26_lock_ctl(flash, ofs, len, SST26_CTL_CHECK);
}
-int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
+static int sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf)
{
- u32 start, end, erase_size;
+ struct spi_slave *spi = flash->spi;
int ret;
- u8 cmd[4];
+ u8 cmd[4] = {
+ CMD_SST_BP,
+ offset >> 16,
+ offset >> 8,
+ offset,
+ };
- erase_size = flash->sector_size;
- if (offset % erase_size || len % erase_size) {
- debug("SF: Erase offset/length not multiple of erase size\n");
- return -1;
- }
+ debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
+ spi_w8r8(spi, CMD_READ_STATUS), buf, cmd[0], offset);
- ret = spi_claim_bus(flash->spi);
- if (ret) {
- debug("SF: Unable to claim SPI bus\n");
+ ret = spi_flash_cmd_write_enable(flash);
+ if (ret)
return ret;
- }
- if (erase_size == 4096)
- cmd[0] = CMD_ERASE_4K;
- else
- cmd[0] = CMD_ERASE_64K;
- start = offset;
- end = start + len;
+ ret = spi_flash_cmd_write(spi, cmd, sizeof(cmd), buf, 1);
+ if (ret)
+ return ret;
- while (offset < end) {
- spi_flash_addr(offset, cmd);
- offset += erase_size;
+ return spi_flash_wait_till_ready(flash, SPI_FLASH_PROG_TIMEOUT);
+}
- debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
- cmd[2], cmd[3], offset);
+int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
+ const void *buf)
+{
+ struct spi_slave *spi = flash->spi;
+ size_t actual, cmd_len;
+ int ret;
+ u8 cmd[4];
- ret = spi_flash_cmd_write_enable(flash);
- if (ret)
- goto out;
+ ret = spi_claim_bus(spi);
+ if (ret) {
+ debug("SF: Unable to claim SPI bus\n");
+ return ret;
+ }
- ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), NULL, 0);
+ /* If the data is not word aligned, write out leading single byte */
+ actual = offset % 2;
+ if (actual) {
+ ret = sst_byte_write(flash, offset, buf);
if (ret)
- goto out;
+ goto done;
+ }
+ offset += actual;
- ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
+ ret = spi_flash_cmd_write_enable(flash);
+ if (ret)
+ goto done;
+
+ cmd_len = 4;
+ cmd[0] = CMD_SST_AAI_WP;
+ cmd[1] = offset >> 16;
+ cmd[2] = offset >> 8;
+ cmd[3] = offset;
+
+ for (; actual < len - 1; actual += 2) {
+ debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
+ spi_w8r8(spi, CMD_READ_STATUS), buf + actual,
+ cmd[0], offset);
+
+ ret = spi_flash_cmd_write(spi, cmd, cmd_len,
+ buf + actual, 2);
+ if (ret) {
+ debug("SF: sst word program failed\n");
+ break;
+ }
+
+ ret = spi_flash_wait_till_ready(flash, SPI_FLASH_PROG_TIMEOUT);
if (ret)
- goto out;
+ break;
+
+ cmd_len = 1;
+ offset += 2;
}
- debug("SF: Successfully erased %zu bytes @ %#x\n", len, start);
+ if (!ret)
+ ret = spi_flash_cmd_write_disable(flash);
+
+ /* If there is a single trailing byte, write it out */
+ if (!ret && actual != len)
+ ret = sst_byte_write(flash, offset, buf + actual);
- out:
- spi_release_bus(flash->spi);
+ done:
+ debug("SF: sst: program %s %zu bytes @ 0x%zx\n",
+ ret ? "failure" : "success", len, offset - actual);
+
+ spi_release_bus(spi);
return ret;
}
-int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
+int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
+ const void *buf)
{
- u8 cmd;
+ struct spi_slave *spi = flash->spi;
+ size_t actual;
int ret;
- ret = spi_flash_cmd_write_enable(flash);
- if (ret < 0) {
- debug("SF: enabling write failed\n");
- return ret;
- }
-
- cmd = CMD_WRITE_STATUS;
- ret = spi_flash_cmd_write(flash->spi, &cmd, 1, &sr, 1);
+ ret = spi_claim_bus(spi);
if (ret) {
- debug("SF: fail to write status register\n");
+ debug("SF: Unable to claim SPI bus\n");
return ret;
}
- ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
- if (ret < 0) {
- debug("SF: write status register timed out\n");
- return ret;
+ for (actual = 0; actual < len; actual++) {
+ ret = sst_byte_write(flash, offset, buf + actual);
+ if (ret) {
+ debug("SF: sst byte program failed\n");
+ break;
+ }
+ offset++;
}
- return 0;
-}
+ if (!ret)
+ ret = spi_flash_cmd_write_disable(flash);
-#ifdef CONFIG_OF_CONTROL
-int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
-{
- fdt_addr_t addr;
- fdt_size_t size;
- int node;
+ debug("SF: sst: program %s %zu bytes @ 0x%zx\n",
+ ret ? "failure" : "success", len, offset - actual);
- /* If there is no node, do nothing */
- node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
- if (node < 0)
- return 0;
+ spi_release_bus(spi);
+ return ret;
+}
+#endif
- addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
- if (addr == FDT_ADDR_T_NONE) {
- debug("%s: Cannot decode address\n", __func__);
- return 0;
+#if defined(CONFIG_SPI_FLASH_STMICRO) || defined(CONFIG_SPI_FLASH_SST)
+static void stm_get_locked_range(struct spi_flash *flash, u8 sr, loff_t *ofs,
+ u64 *len)
+{
+ u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
+ int shift = ffs(mask) - 1;
+ int pow;
+
+ if (!(sr & mask)) {
+ /* No protection */
+ *ofs = 0;
+ *len = 0;
+ } else {
+ pow = ((sr & mask) ^ mask) >> shift;
+ *len = flash->size >> pow;
+ *ofs = flash->size - *len;
}
+}
- if (flash->size != size) {
- debug("%s: Memory map must cover entire device\n", __func__);
- return -1;
- }
- flash->memory_map = (void *)addr;
+/*
+ * Return 1 if the entire region is locked, 0 otherwise
+ */
+static int stm_is_locked_sr(struct spi_flash *flash, loff_t ofs, u64 len,
+ u8 sr)
+{
+ loff_t lock_offs;
+ u64 lock_len;
- return 0;
+ stm_get_locked_range(flash, sr, &lock_offs, &lock_len);
+
+ return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs);
}
-#endif /* CONFIG_OF_CONTROL */
/*
- * The following table holds all device probe functions
+ * Check if a region of the flash is (completely) locked. See stm_lock() for
+ * more info.
*
- * shift: number of continuation bytes before the ID
- * idcode: the expected IDCODE or 0xff for non JEDEC devices
- * probe: the function to call
+ * Returns 1 if entire region is locked, 0 if any portion is unlocked, and
+ * negative on errors.
+ */
+int stm_is_locked(struct spi_flash *flash, u32 ofs, size_t len)
+{
+ int status;
+ u8 sr;
+
+ status = read_sr(flash, &sr);
+ if (status < 0)
+ return status;
+
+ return stm_is_locked_sr(flash, ofs, len, sr);
+}
+
+/*
+ * Lock a region of the flash. Compatible with ST Micro and similar flash.
+ * Supports only the block protection bits BP{0,1,2} in the status register
+ * (SR). Does not support these features found in newer SR bitfields:
+ * - TB: top/bottom protect - only handle TB=0 (top protect)
+ * - SEC: sector/block protect - only handle SEC=0 (block protect)
+ * - CMP: complement protect - only support CMP=0 (range is not complemented)
*
- * Non JEDEC devices should be ordered in the table such that
- * the probe functions with best detection algorithms come first.
+ * Sample table portion for 8MB flash (Winbond w25q64fw):
*
- * Several matching entries are permitted, they will be tried
- * in sequence until a probe function returns non NULL.
+ * SEC | TB | BP2 | BP1 | BP0 | Prot Length | Protected Portion
+ * --------------------------------------------------------------------------
+ * X | X | 0 | 0 | 0 | NONE | NONE
+ * 0 | 0 | 0 | 0 | 1 | 128 KB | Upper 1/64
+ * 0 | 0 | 0 | 1 | 0 | 256 KB | Upper 1/32
+ * 0 | 0 | 0 | 1 | 1 | 512 KB | Upper 1/16
+ * 0 | 0 | 1 | 0 | 0 | 1 MB | Upper 1/8
+ * 0 | 0 | 1 | 0 | 1 | 2 MB | Upper 1/4
+ * 0 | 0 | 1 | 1 | 0 | 4 MB | Upper 1/2
+ * X | X | 1 | 1 | 1 | 8 MB | ALL
*
- * IDCODE_CONT_LEN may be redefined if a device needs to declare a
- * larger "shift" value. IDCODE_PART_LEN generally shouldn't be
- * changed. This is the max number of bytes probe functions may
- * examine when looking up part-specific identification info.
+ * Returns negative on errors, 0 on success.
+ */
+int stm_lock(struct spi_flash *flash, u32 ofs, size_t len)
+{
+ u8 status_old, status_new;
+ u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
+ u8 shift = ffs(mask) - 1, pow, val;
+ int ret;
+
+ ret = read_sr(flash, &status_old);
+ if (ret < 0)
+ return ret;
+
+ /* SPI NOR always locks to the end */
+ if (ofs + len != flash->size) {
+ /* Does combined region extend to end? */
+ if (!stm_is_locked_sr(flash, ofs + len, flash->size - ofs - len,
+ status_old))
+ return -EINVAL;
+ len = flash->size - ofs;
+ }
+
+ /*
+ * Need smallest pow such that:
+ *
+ * 1 / (2^pow) <= (len / size)
+ *
+ * so (assuming power-of-2 size) we do:
+ *
+ * pow = ceil(log2(size / len)) = log2(size) - floor(log2(len))
+ */
+ pow = ilog2(flash->size) - ilog2(len);
+ val = mask - (pow << shift);
+ if (val & ~mask)
+ return -EINVAL;
+
+ /* Don't "lock" with no region! */
+ if (!(val & mask))
+ return -EINVAL;
+
+ status_new = (status_old & ~mask) | val;
+
+ /* Only modify protection if it will not unlock other areas */
+ if ((status_new & mask) <= (status_old & mask))
+ return -EINVAL;
+
+ write_sr(flash, status_new);
+
+ return 0;
+}
+
+/*
+ * Unlock a region of the flash. See stm_lock() for more info
*
- * Probe functions will be given the idcode buffer starting at their
- * manu id byte (the "idcode" in the table below). In other words,
- * all of the continuation bytes will be skipped (the "shift" below).
+ * Returns negative on errors, 0 on success.
*/
-#define IDCODE_CONT_LEN 0
-#define IDCODE_PART_LEN 5
-static const struct {
- const u8 shift;
- const u8 idcode;
- struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode);
-} flashes[] = {
- /* Keep it sorted by define name */
-#ifdef CONFIG_SPI_FLASH_ATMEL
- { 0, 0x1f, spi_flash_probe_atmel, },
-#endif
-#ifdef CONFIG_SPI_FLASH_EON
- { 0, 0x1c, spi_flash_probe_eon, },
+int stm_unlock(struct spi_flash *flash, u32 ofs, size_t len)
+{
+ uint8_t status_old, status_new;
+ u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
+ u8 shift = ffs(mask) - 1, pow, val;
+ int ret;
+
+ ret = read_sr(flash, &status_old);
+ if (ret < 0)
+ return ret;
+
+ /* Cannot unlock; would unlock larger region than requested */
+ if (stm_is_locked_sr(flash, ofs - flash->erase_size, flash->erase_size,
+ status_old))
+ return -EINVAL;
+ /*
+ * Need largest pow such that:
+ *
+ * 1 / (2^pow) >= (len / size)
+ *
+ * so (assuming power-of-2 size) we do:
+ *
+ * pow = floor(log2(size / len)) = log2(size) - ceil(log2(len))
+ */
+ pow = ilog2(flash->size) - order_base_2(flash->size - (ofs + len));
+ if (ofs + len == flash->size) {
+ val = 0; /* fully unlocked */
+ } else {
+ val = mask - (pow << shift);
+ /* Some power-of-two sizes are not supported */
+ if (val & ~mask)
+ return -EINVAL;
+ }
+
+ status_new = (status_old & ~mask) | val;
+
+ /* Only modify protection if it will not lock other areas */
+ if ((status_new & mask) >= (status_old & mask))
+ return -EINVAL;
+
+ write_sr(flash, status_new);
+
+ return 0;
+}
#endif
+
+
#ifdef CONFIG_SPI_FLASH_MACRONIX
- { 0, 0xc2, spi_flash_probe_macronix, },
+static int macronix_quad_enable(struct spi_flash *flash)
+{
+ u8 qeb_status;
+ int ret;
+
+ ret = read_sr(flash, &qeb_status);
+ if (ret < 0)
+ return ret;
+
+ if (qeb_status & STATUS_QEB_MXIC)
+ return 0;
+
+ ret = write_sr(flash, qeb_status | STATUS_QEB_MXIC);
+ if (ret < 0)
+ return ret;
+
+ /* read SR and check it */
+ ret = read_sr(flash, &qeb_status);
+ if (!(ret >= 0 && (qeb_status & STATUS_QEB_MXIC))) {
+ printf("SF: Macronix SR Quad bit not clear\n");
+ return -EINVAL;
+ }
+
+ return ret;
+}
#endif
-#ifdef CONFIG_SPI_FLASH_SPANSION
- { 0, 0x01, spi_flash_probe_spansion, },
+
+#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
+static int spansion_quad_enable(struct spi_flash *flash)
+{
+ u8 qeb_status;
+ int ret;
+
+ ret = read_cr(flash, &qeb_status);
+ if (ret < 0)
+ return ret;
+
+ if (qeb_status & STATUS_QEB_WINSPAN)
+ return 0;
+
+ ret = write_cr(flash, qeb_status | STATUS_QEB_WINSPAN);
+ if (ret < 0)
+ return ret;
+
+ /* read CR and check it */
+ ret = read_cr(flash, &qeb_status);
+ if (!(ret >= 0 && (qeb_status & STATUS_QEB_WINSPAN))) {
+ printf("SF: Spansion CR Quad bit not clear\n");
+ return -EINVAL;
+ }
+
+ return ret;
+}
#endif
-#ifdef CONFIG_SPI_FLASH_SST
- { 0, 0xbf, spi_flash_probe_sst, },
+
+static const struct spi_flash_info *spi_flash_read_id(struct spi_flash *flash)
+{
+ int tmp;
+ u8 id[SPI_FLASH_MAX_ID_LEN];
+ const struct spi_flash_info *info;
+
+ tmp = spi_flash_cmd(flash->spi, CMD_READ_ID, id, SPI_FLASH_MAX_ID_LEN);
+ if (tmp < 0) {
+ printf("SF: error %d reading JEDEC ID\n", tmp);
+ return ERR_PTR(tmp);
+ }
+
+ info = spi_flash_ids;
+ for (; info->name != NULL; info++) {
+ if (info->id_len) {
+ if (!memcmp(info->id, id, info->id_len))
+ return info;
+ }
+ }
+
+ printf("SF: unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
+ id[0], id[1], id[2]);
+ return ERR_PTR(-ENODEV);
+}
+
+static int set_quad_mode(struct spi_flash *flash,
+ const struct spi_flash_info *info)
+{
+ switch (JEDEC_MFR(info)) {
+#ifdef CONFIG_SPI_FLASH_MACRONIX
+ case SPI_FLASH_CFI_MFR_MACRONIX:
+ return macronix_quad_enable(flash);
+#endif
+#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
+ case SPI_FLASH_CFI_MFR_SPANSION:
+ case SPI_FLASH_CFI_MFR_WINBOND:
+ return spansion_quad_enable(flash);
#endif
#ifdef CONFIG_SPI_FLASH_STMICRO
- { 0, 0x20, spi_flash_probe_stmicro, },
+ case SPI_FLASH_CFI_MFR_STMICRO:
+ debug("SF: QEB is volatile for %02x flash\n", JEDEC_MFR(info));
+ return 0;
#endif
-#ifdef CONFIG_SPI_FLASH_WINBOND
- { 0, 0xef, spi_flash_probe_winbond, },
+ default:
+ printf("SF: Need set QEB func for %02x flash\n",
+ JEDEC_MFR(info));
+ return -1;
+ }
+}
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+int spi_flash_decode_fdt(struct spi_flash *flash)
+{
+#ifdef CONFIG_DM_SPI_FLASH
+ fdt_addr_t addr;
+ fdt_size_t size;
+
+ addr = dev_read_addr_size(flash->dev, "memory-map", &size);
+ if (addr == FDT_ADDR_T_NONE) {
+ debug("%s: Cannot decode address\n", __func__);
+ return 0;
+ }
+
+ if (flash->size > size) {
+ debug("%s: Memory map must cover entire device\n", __func__);
+ return -1;
+ }
+ flash->memory_map = map_sysmem(addr, size);
#endif
-#ifdef CONFIG_SPI_FRAM_RAMTRON
- { 6, 0xc2, spi_fram_probe_ramtron, },
-# undef IDCODE_CONT_LEN
-# define IDCODE_CONT_LEN 6
+
+ return 0;
+}
+#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
+
+int spi_flash_scan(struct spi_flash *flash)
+{
+ struct spi_slave *spi = flash->spi;
+ const struct spi_flash_info *info = NULL;
+ int ret;
+
+ info = spi_flash_read_id(flash);
+ if (IS_ERR_OR_NULL(info))
+ return -ENOENT;
+
+ /*
+ * Flash powers up read-only, so clear BP# bits.
+ *
+ * Note on some flash (like Macronix), QE (quad enable) bit is in the
+ * same status register as BP# bits, and we need preserve its original
+ * value during a reboot cycle as this is required by some platforms
+ * (like Intel ICH SPI controller working under descriptor mode).
+ */
+ if (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_ATMEL ||
+ (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_SST) ||
+ (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_MACRONIX)) {
+ u8 sr = 0;
+
+ if (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_MACRONIX) {
+ read_sr(flash, &sr);
+ sr &= STATUS_QEB_MXIC;
+ }
+ write_sr(flash, sr);
+ }
+
+ flash->name = info->name;
+ flash->memory_map = spi->memory_map;
+
+ if (info->flags & SST_WR)
+ flash->flags |= SNOR_F_SST_WR;
+
+#ifndef CONFIG_DM_SPI_FLASH
+ flash->write = spi_flash_cmd_write_ops;
+#if defined(CONFIG_SPI_FLASH_SST)
+ if (flash->flags & SNOR_F_SST_WR) {
+ if (spi->mode & SPI_TX_BYTE)
+ flash->write = sst_write_bp;
+ else
+ flash->write = sst_write_wp;
+ }
#endif
- /* Keep it sorted by best detection */
-#ifdef CONFIG_SPI_FLASH_STMICRO
- { 0, 0xff, spi_flash_probe_stmicro, },
+ flash->erase = spi_flash_cmd_erase_ops;
+ flash->read = spi_flash_cmd_read_ops;
#endif
-#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
- { 0, 0xff, spi_fram_probe_ramtron, },
+
+#if defined(CONFIG_SPI_FLASH_STMICRO) || defined(CONFIG_SPI_FLASH_SST)
+ /* NOR protection support for STmicro/Micron chips and similar */
+ if (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_STMICRO ||
+ JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_SST) {
+ flash->flash_lock = stm_lock;
+ flash->flash_unlock = stm_unlock;
+ flash->flash_is_locked = stm_is_locked;
+ }
#endif
-};
-#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN)
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode)
-{
- struct spi_slave *spi;
- struct spi_flash *flash = NULL;
- int ret, i, shift;
- u8 idcode[IDCODE_LEN], *idp;
+/* sst26wf series block protection implementation differs from other series */
+#if defined(CONFIG_SPI_FLASH_SST)
+ if (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_SST && info->id[1] == 0x26) {
+ flash->flash_lock = sst26_lock;
+ flash->flash_unlock = sst26_unlock;
+ flash->flash_is_locked = sst26_is_locked;
+ }
+#endif
- spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
- if (!spi) {
- printf("SF: Failed to set up slave\n");
- return NULL;
+ /* Compute the flash size */
+ flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
+ flash->page_size = info->page_size;
+ /*
+ * The Spansion S25FS512S, S25FL032P and S25FL064P have 256b pages,
+ * yet use the 0x4d00 Extended JEDEC code. The rest of the Spansion
+ * flashes with the 0x4d00 Extended JEDEC code have 512b pages.
+ * All of the others have 256b pages.
+ */
+ if (JEDEC_EXT(info) == 0x4d00) {
+ if ((JEDEC_ID(info) != 0x0215) &&
+ (JEDEC_ID(info) != 0x0216) &&
+ (JEDEC_ID(info) != 0x0220))
+ flash->page_size = 512;
}
+ flash->page_size <<= flash->shift;
+ flash->sector_size = info->sector_size << flash->shift;
+ flash->size = flash->sector_size * info->n_sectors << flash->shift;
+#ifdef CONFIG_SF_DUAL_FLASH
+ if (flash->dual_flash & SF_DUAL_STACKED_FLASH)
+ flash->size <<= 1;
+#endif
- ret = spi_claim_bus(spi);
- if (ret) {
- debug("SF: Failed to claim SPI bus: %d\n", ret);
- goto err_claim_bus;
+#ifdef CONFIG_SPI_FLASH_USE_4K_SECTORS
+ /* Compute erase sector and command */
+ if (info->flags & SECT_4K) {
+ flash->erase_cmd = CMD_ERASE_4K;
+ flash->erase_size = 4096 << flash->shift;
+ } else
+#endif
+ {
+ flash->erase_cmd = CMD_ERASE_64K;
+ flash->erase_size = flash->sector_size;
}
- /* Read the ID codes */
- ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
- if (ret)
- goto err_read_id;
-
-#ifdef DEBUG
- printf("SF: Got idcodes\n");
- print_buffer(0, idcode, 1, sizeof(idcode), 0);
-#endif
-
- /* count the number of continuation bytes */
- for (shift = 0, idp = idcode;
- shift < IDCODE_CONT_LEN && *idp == 0x7f;
- ++shift, ++idp)
- continue;
-
- /* search the table for matches in shift and id */
- for (i = 0; i < ARRAY_SIZE(flashes); ++i)
- if (flashes[i].shift == shift && flashes[i].idcode == *idp) {
- /* we have a match, call probe */
- flash = flashes[i].probe(spi, idp);
- if (flash)
- break;
+ /* Now erase size becomes valid sector size */
+ flash->sector_size = flash->erase_size;
+
+ /* Look for read commands */
+ flash->read_cmd = CMD_READ_ARRAY_FAST;
+ if (spi->mode & SPI_RX_SLOW)
+ flash->read_cmd = CMD_READ_ARRAY_SLOW;
+ else if (spi->mode & SPI_RX_QUAD && info->flags & RD_QUAD)
+ flash->read_cmd = CMD_READ_QUAD_OUTPUT_FAST;
+ else if (spi->mode & SPI_RX_DUAL && info->flags & RD_DUAL)
+ flash->read_cmd = CMD_READ_DUAL_OUTPUT_FAST;
+
+ /* Look for write commands */
+ if (info->flags & WR_QPP && spi->mode & SPI_TX_QUAD)
+ flash->write_cmd = CMD_QUAD_PAGE_PROGRAM;
+ else
+ /* Go for default supported write cmd */
+ flash->write_cmd = CMD_PAGE_PROGRAM;
+
+ /* Set the quad enable bit - only for quad commands */
+ if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
+ (flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
+ (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
+ ret = set_quad_mode(flash, info);
+ if (ret) {
+ debug("SF: Fail to set QEB for %02x\n",
+ JEDEC_MFR(info));
+ return -EINVAL;
}
+ }
- if (!flash) {
- printf("SF: Unsupported manufacturer %02x\n", *idp);
- goto err_manufacturer_probe;
+ /* Read dummy_byte: dummy byte is determined based on the
+ * dummy cycles of a particular command.
+ * Fast commands - dummy_byte = dummy_cycles/8
+ * I/O commands- dummy_byte = (dummy_cycles * no.of lines)/8
+ * For I/O commands except cmd[0] everything goes on no.of lines
+ * based on particular command but incase of fast commands except
+ * data all go on single line irrespective of command.
+ */
+ switch (flash->read_cmd) {
+ case CMD_READ_QUAD_IO_FAST:
+ flash->dummy_byte = 2;
+ break;
+ case CMD_READ_ARRAY_SLOW:
+ flash->dummy_byte = 0;
+ break;
+ default:
+ flash->dummy_byte = 1;
}
-#ifdef CONFIG_OF_CONTROL
- if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
+#ifdef CONFIG_SPI_FLASH_STMICRO
+ if (info->flags & E_FSR)
+ flash->flags |= SNOR_F_USE_FSR;
+#endif
+
+ /* Configure the BAR - discover bank cmds and read current bank */
+#ifdef CONFIG_SPI_FLASH_BAR
+ ret = read_bar(flash, info);
+ if (ret < 0)
+ return ret;
+#endif
+
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
+ ret = spi_flash_decode_fdt(flash);
+ if (ret) {
debug("SF: FDT decode error\n");
- goto err_manufacturer_probe;
+ return -EINVAL;
}
#endif
+
+#ifndef CONFIG_SPL_BUILD
printf("SF: Detected %s with page size ", flash->name);
- print_size(flash->sector_size, ", total ");
+ print_size(flash->page_size, ", erase size ");
+ print_size(flash->erase_size, ", total ");
print_size(flash->size, "");
if (flash->memory_map)
printf(", mapped at %p", flash->memory_map);
puts("\n");
+#endif
- spi_release_bus(spi);
-
- return flash;
-
-err_manufacturer_probe:
-err_read_id:
- spi_release_bus(spi);
-err_claim_bus:
- spi_free_slave(spi);
- return NULL;
-}
-
-void *spi_flash_do_alloc(int offset, int size, struct spi_slave *spi,
- const char *name)
-{
- struct spi_flash *flash;
- void *ptr;
-
- ptr = malloc(size);
- if (!ptr) {
- debug("SF: Failed to allocate memory\n");
- return NULL;
+#ifndef CONFIG_SPI_FLASH_BAR
+ if (((flash->dual_flash == SF_SINGLE_FLASH) &&
+ (flash->size > SPI_FLASH_16MB_BOUN)) ||
+ ((flash->dual_flash > SF_SINGLE_FLASH) &&
+ (flash->size > SPI_FLASH_16MB_BOUN << 1))) {
+ puts("SF: Warning - Only lower 16MiB accessible,");
+ puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
}
- memset(ptr, '\0', size);
- flash = (struct spi_flash *)(ptr + offset);
-
- /* Set up some basic fields - caller will sort out sizes */
- flash->spi = spi;
- flash->name = name;
-
- flash->read = spi_flash_cmd_read_fast;
- flash->write = spi_flash_cmd_write_multi;
- flash->erase = spi_flash_cmd_erase;
-
- return flash;
-}
+#endif
-void spi_flash_free(struct spi_flash *flash)
-{
- spi_free_slave(flash->spi);
- free(flash);
+ return 0;
}
projects / u-boot / blobdiff