]> git.sur5r.net Git - u-boot/blobdiff - drivers/mtd/spi/spi_flash.c
sf: ramtron: Add support for separate flash driver
[u-boot] / drivers / mtd / spi / spi_flash.c
index a468208f4348b933ac56c24502abc6430a0a0131..ddbdda0dc2992310e0f724c7445c982ba85d5fec 100644 (file)
@@ -8,23 +8,7 @@
  */
 
 #include <common.h>
-#include <fdtdec.h>
-#include <malloc.h>
 #include <spi.h>
-#include <spi_flash.h>
-#include <watchdog.h>
-
-#include "spi_flash_internal.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void spi_flash_addr(u32 addr, u8 *cmd)
-{
-       /* cmd[0] is actual command */
-       cmd[1] = addr >> 16;
-       cmd[2] = addr >> 8;
-       cmd[3] = addr >> 0;
-}
 
 static int spi_flash_read_write(struct spi_slave *spi,
                                const u8 *cmd, size_t cmd_len,
@@ -40,570 +24,31 @@ static int spi_flash_read_write(struct spi_slave *spi,
        ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
        if (ret) {
                debug("SF: Failed to send command (%zu bytes): %d\n",
-                               cmd_len, ret);
+                     cmd_len, ret);
        } else if (data_len != 0) {
-               ret = spi_xfer(spi, data_len * 8, data_out, data_in, SPI_XFER_END);
+               ret = spi_xfer(spi, data_len * 8, data_out, data_in,
+                                       SPI_XFER_END);
                if (ret)
                        debug("SF: Failed to transfer %zu bytes of data: %d\n",
-                                       data_len, ret);
+                             data_len, ret);
        }
 
        return ret;
 }
 
-int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len)
-{
-       return spi_flash_cmd_read(spi, &cmd, 1, response, len);
-}
-
 int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
                size_t cmd_len, void *data, size_t data_len)
 {
        return spi_flash_read_write(spi, cmd, cmd_len, NULL, data, data_len);
 }
 
-int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
-               const void *data, size_t data_len)
-{
-       return spi_flash_read_write(spi, cmd, cmd_len, data, NULL, data_len);
-}
-
-int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
-{
-       struct spi_slave *spi = flash->spi;
-       unsigned long timebase;
-       int ret;
-       u8 status;
-       u8 check_status = 0x0;
-       u8 poll_bit = STATUS_WIP;
-       u8 cmd = flash->poll_cmd;
-
-       if (cmd == CMD_FLAG_STATUS) {
-               poll_bit = STATUS_PEC;
-               check_status = poll_bit;
-       }
-
-       ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
-       if (ret) {
-               debug("SF: fail to read %s status register\n",
-                       cmd == CMD_READ_STATUS ? "read" : "flag");
-               return ret;
-       }
-
-       timebase = get_timer(0);
-       do {
-               WATCHDOG_RESET();
-
-               ret = spi_xfer(spi, 8, NULL, &status, 0);
-               if (ret)
-                       return -1;
-
-               if ((status & poll_bit) == check_status)
-                       break;
-
-       } while (get_timer(timebase) < timeout);
-
-       spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
-
-       if ((status & poll_bit) == check_status)
-               return 0;
-
-       /* Timed out */
-       debug("SF: time out!\n");
-       return -1;
-}
-
-int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
-               size_t cmd_len, const void *buf, size_t buf_len)
-{
-       struct spi_slave *spi = flash->spi;
-       unsigned long timeout = SPI_FLASH_PROG_TIMEOUT;
-       int ret;
-
-       if (buf == NULL)
-               timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT;
-
-       ret = spi_claim_bus(flash->spi);
-       if (ret) {
-               debug("SF: unable to claim SPI bus\n");
-               return ret;
-       }
-
-       ret = spi_flash_cmd_write_enable(flash);
-       if (ret < 0) {
-               debug("SF: enabling write failed\n");
-               return ret;
-       }
-
-       ret = spi_flash_cmd_write(spi, cmd, cmd_len, buf, buf_len);
-       if (ret < 0) {
-               debug("SF: write cmd failed\n");
-               return ret;
-       }
-
-       ret = spi_flash_cmd_wait_ready(flash, timeout);
-       if (ret < 0) {
-               debug("SF: write %s timed out\n",
-                       timeout == SPI_FLASH_PROG_TIMEOUT ?
-                       "program" : "page erase");
-               return ret;
-       }
-
-       spi_release_bus(spi);
-
-       return ret;
-}
-
-int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
-{
-       u32 erase_size;
-       u8 cmd[4];
-       int ret = -1;
-
-       erase_size = flash->sector_size;
-       if (offset % erase_size || len % erase_size) {
-               debug("SF: Erase offset/length not multiple of erase size\n");
-               return -1;
-       }
-
-       if (erase_size == 4096)
-               cmd[0] = CMD_ERASE_4K;
-       else
-               cmd[0] = CMD_ERASE_64K;
-
-       while (len) {
-#ifdef CONFIG_SPI_FLASH_BAR
-               u8 bank_sel;
-
-               bank_sel = offset / SPI_FLASH_16MB_BOUN;
-
-               ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
-               if (ret) {
-                       debug("SF: fail to set bank%d\n", bank_sel);
-                       return ret;
-               }
-#endif
-               spi_flash_addr(offset, cmd);
-
-               debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
-                     cmd[2], cmd[3], offset);
-
-               ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0);
-               if (ret < 0) {
-                       debug("SF: erase failed\n");
-                       break;
-               }
-
-               offset += erase_size;
-               len -= erase_size;
-       }
-
-       return ret;
-}
-
-int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
-               size_t len, const void *buf)
-{
-       unsigned long byte_addr, page_size;
-       size_t chunk_len, actual;
-       u8 cmd[4];
-       int ret = -1;
-
-       page_size = flash->page_size;
-
-       cmd[0] = CMD_PAGE_PROGRAM;
-       for (actual = 0; actual < len; actual += chunk_len) {
-#ifdef CONFIG_SPI_FLASH_BAR
-               u8 bank_sel;
-
-               bank_sel = offset / SPI_FLASH_16MB_BOUN;
-
-               ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
-               if (ret) {
-                       debug("SF: fail to set bank%d\n", bank_sel);
-                       return ret;
-               }
-#endif
-               byte_addr = offset % page_size;
-               chunk_len = min(len - actual, page_size - byte_addr);
-
-               if (flash->spi->max_write_size)
-                       chunk_len = min(chunk_len, flash->spi->max_write_size);
-
-               spi_flash_addr(offset, cmd);
-
-               debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
-                     buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
-
-               ret = spi_flash_write_common(flash, cmd, sizeof(cmd),
-                                       buf + actual, chunk_len);
-               if (ret < 0) {
-                       debug("SF: write failed\n");
-                       break;
-               }
-
-               offset += chunk_len;
-       }
-
-       return ret;
-}
-
-int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
-               size_t cmd_len, void *data, size_t data_len)
-{
-       struct spi_slave *spi = flash->spi;
-       int ret;
-
-       ret = spi_claim_bus(flash->spi);
-       if (ret) {
-               debug("SF: unable to claim SPI bus\n");
-               return ret;
-       }
-
-       ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len);
-       if (ret < 0) {
-               debug("SF: read cmd failed\n");
-               return ret;
-       }
-
-       spi_release_bus(spi);
-
-       return ret;
-}
-
-int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
-               size_t len, void *data)
-{
-       u8 cmd[5], bank_sel = 0;
-       u32 remain_len, read_len;
-       int ret = -1;
-
-       /* Handle memory-mapped SPI */
-       if (flash->memory_map) {
-               memcpy(data, flash->memory_map + offset, len);
-               return 0;
-       }
-
-       cmd[0] = CMD_READ_ARRAY_FAST;
-       cmd[4] = 0x00;
-
-       while (len) {
-#ifdef CONFIG_SPI_FLASH_BAR
-               bank_sel = offset / SPI_FLASH_16MB_BOUN;
-
-               ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
-               if (ret) {
-                       debug("SF: fail to set bank%d\n", bank_sel);
-                       return ret;
-               }
-#endif
-               remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1) - offset);
-               if (len < remain_len)
-                       read_len = len;
-               else
-                       read_len = remain_len;
-
-               spi_flash_addr(offset, cmd);
-
-               ret = spi_flash_read_common(flash, cmd, sizeof(cmd),
-                                                       data, read_len);
-               if (ret < 0) {
-                       debug("SF: read failed\n");
-                       break;
-               }
-
-               offset += read_len;
-               len -= read_len;
-               data += read_len;
-       }
-
-       return ret;
-}
-
-int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
-{
-       u8 cmd;
-       int ret;
-
-       cmd = CMD_WRITE_STATUS;
-       ret = spi_flash_write_common(flash, &cmd, 1, &sr, 1);
-       if (ret < 0) {
-               debug("SF: fail to write status register\n");
-               return ret;
-       }
-
-       return 0;
-}
-
-#ifdef CONFIG_SPI_FLASH_BAR
-int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
-{
-       u8 cmd;
-       int ret;
-
-       if (flash->bank_curr == bank_sel) {
-               debug("SF: not require to enable bank%d\n", bank_sel);
-               return 0;
-       }
-
-       cmd = flash->bank_write_cmd;
-       ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1);
-       if (ret < 0) {
-               debug("SF: fail to write bank register\n");
-               return ret;
-       }
-       flash->bank_curr = bank_sel;
-
-       return 0;
-}
-
-int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0)
-{
-       u8 cmd;
-       u8 curr_bank = 0;
-
-       /* discover bank cmds */
-       switch (idcode0) {
-       case SPI_FLASH_SPANSION_IDCODE0:
-               flash->bank_read_cmd = CMD_BANKADDR_BRRD;
-               flash->bank_write_cmd = CMD_BANKADDR_BRWR;
-               break;
-       case SPI_FLASH_STMICRO_IDCODE0:
-       case SPI_FLASH_WINBOND_IDCODE0:
-               flash->bank_read_cmd = CMD_EXTNADDR_RDEAR;
-               flash->bank_write_cmd = CMD_EXTNADDR_WREAR;
-               break;
-       default:
-               printf("SF: Unsupported bank commands %02x\n", idcode0);
-               return -1;
-       }
-
-       /* read the bank reg - on which bank the flash is in currently */
-       cmd = flash->bank_read_cmd;
-       if (flash->size > SPI_FLASH_16MB_BOUN) {
-               if (spi_flash_read_common(flash, &cmd, 1, &curr_bank, 1)) {
-                       debug("SF: fail to read bank addr register\n");
-                       return -1;
-               }
-               flash->bank_curr = curr_bank;
-       } else {
-               flash->bank_curr = curr_bank;
-       }
-
-       return 0;
-}
-#endif
-
-#ifdef CONFIG_OF_CONTROL
-int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
-{
-       fdt_addr_t addr;
-       fdt_size_t size;
-       int node;
-
-       /* If there is no node, do nothing */
-       node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
-       if (node < 0)
-               return 0;
-
-       addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
-       if (addr == FDT_ADDR_T_NONE) {
-               debug("%s: Cannot decode address\n", __func__);
-               return 0;
-       }
-
-       if (flash->size != size) {
-               debug("%s: Memory map must cover entire device\n", __func__);
-               return -1;
-       }
-       flash->memory_map = (void *)addr;
-
-       return 0;
-}
-#endif /* CONFIG_OF_CONTROL */
-
-/*
- * The following table holds all device probe functions
- *
- * shift:  number of continuation bytes before the ID
- * idcode: the expected IDCODE or 0xff for non JEDEC devices
- * probe:  the function to call
- *
- * Non JEDEC devices should be ordered in the table such that
- * the probe functions with best detection algorithms come first.
- *
- * Several matching entries are permitted, they will be tried
- * in sequence until a probe function returns non NULL.
- *
- * IDCODE_CONT_LEN may be redefined if a device needs to declare a
- * larger "shift" value.  IDCODE_PART_LEN generally shouldn't be
- * changed.  This is the max number of bytes probe functions may
- * examine when looking up part-specific identification info.
- *
- * Probe functions will be given the idcode buffer starting at their
- * manu id byte (the "idcode" in the table below).  In other words,
- * all of the continuation bytes will be skipped (the "shift" below).
- */
-#define IDCODE_CONT_LEN 0
-#define IDCODE_PART_LEN 5
-static const struct {
-       const u8 shift;
-       const u8 idcode;
-       struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode);
-} flashes[] = {
-       /* Keep it sorted by define name */
-#ifdef CONFIG_SPI_FLASH_ATMEL
-       { 0, 0x1f, spi_flash_probe_atmel, },
-#endif
-#ifdef CONFIG_SPI_FLASH_EON
-       { 0, 0x1c, spi_flash_probe_eon, },
-#endif
-#ifdef CONFIG_SPI_FLASH_MACRONIX
-       { 0, 0xc2, spi_flash_probe_macronix, },
-#endif
-#ifdef CONFIG_SPI_FLASH_SPANSION
-       { 0, 0x01, spi_flash_probe_spansion, },
-#endif
-#ifdef CONFIG_SPI_FLASH_SST
-       { 0, 0xbf, spi_flash_probe_sst, },
-#endif
-#ifdef CONFIG_SPI_FLASH_STMICRO
-       { 0, 0x20, spi_flash_probe_stmicro, },
-#endif
-#ifdef CONFIG_SPI_FLASH_WINBOND
-       { 0, 0xef, spi_flash_probe_winbond, },
-#endif
-#ifdef CONFIG_SPI_FRAM_RAMTRON
-       { 6, 0xc2, spi_fram_probe_ramtron, },
-# undef IDCODE_CONT_LEN
-# define IDCODE_CONT_LEN 6
-#endif
-       /* Keep it sorted by best detection */
-#ifdef CONFIG_SPI_FLASH_STMICRO
-       { 0, 0xff, spi_flash_probe_stmicro, },
-#endif
-#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
-       { 0, 0xff, spi_fram_probe_ramtron, },
-#endif
-};
-#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN)
-
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
-               unsigned int max_hz, unsigned int spi_mode)
-{
-       struct spi_slave *spi;
-       struct spi_flash *flash = NULL;
-       int ret, i, shift;
-       u8 idcode[IDCODE_LEN], *idp;
-
-       spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
-       if (!spi) {
-               printf("SF: Failed to set up slave\n");
-               return NULL;
-       }
-
-       ret = spi_claim_bus(spi);
-       if (ret) {
-               debug("SF: Failed to claim SPI bus: %d\n", ret);
-               goto err_claim_bus;
-       }
-
-       /* Read the ID codes */
-       ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
-       if (ret)
-               goto err_read_id;
-
-#ifdef DEBUG
-       printf("SF: Got idcodes\n");
-       print_buffer(0, idcode, 1, sizeof(idcode), 0);
-#endif
-
-       /* count the number of continuation bytes */
-       for (shift = 0, idp = idcode;
-            shift < IDCODE_CONT_LEN && *idp == 0x7f;
-            ++shift, ++idp)
-               continue;
-
-       /* search the table for matches in shift and id */
-       for (i = 0; i < ARRAY_SIZE(flashes); ++i)
-               if (flashes[i].shift == shift && flashes[i].idcode == *idp) {
-                       /* we have a match, call probe */
-                       flash = flashes[i].probe(spi, idp);
-                       if (flash)
-                               break;
-               }
-
-       if (!flash) {
-               printf("SF: Unsupported manufacturer %02x\n", *idp);
-               goto err_manufacturer_probe;
-       }
-
-#ifdef CONFIG_SPI_FLASH_BAR
-       /* Configure the BAR - disover bank cmds and read current bank  */
-       ret = spi_flash_bank_config(flash, *idp);
-       if (ret < 0)
-               goto err_manufacturer_probe;
-#endif
-
-#ifdef CONFIG_OF_CONTROL
-       if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
-               debug("SF: FDT decode error\n");
-               goto err_manufacturer_probe;
-       }
-#endif
-       printf("SF: Detected %s with page size ", flash->name);
-       print_size(flash->sector_size, ", total ");
-       print_size(flash->size, "");
-       if (flash->memory_map)
-               printf(", mapped at %p", flash->memory_map);
-       puts("\n");
-#ifndef CONFIG_SPI_FLASH_BAR
-       if (flash->size > SPI_FLASH_16MB_BOUN) {
-               puts("SF: Warning - Only lower 16MiB accessible,");
-               puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
-       }
-#endif
-
-       spi_release_bus(spi);
-
-       return flash;
-
-err_manufacturer_probe:
-err_read_id:
-       spi_release_bus(spi);
-err_claim_bus:
-       spi_free_slave(spi);
-       return NULL;
-}
-
-void *spi_flash_do_alloc(int offset, int size, struct spi_slave *spi,
-                        const char *name)
+int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len)
 {
-       struct spi_flash *flash;
-       void *ptr;
-
-       ptr = malloc(size);
-       if (!ptr) {
-               debug("SF: Failed to allocate memory\n");
-               return NULL;
-       }
-       memset(ptr, '\0', size);
-       flash = (struct spi_flash *)(ptr + offset);
-
-       /* Set up some basic fields - caller will sort out sizes */
-       flash->spi = spi;
-       flash->name = name;
-       flash->poll_cmd = CMD_READ_STATUS;
-
-       flash->read = spi_flash_cmd_read_fast;
-       flash->write = spi_flash_cmd_write_multi;
-       flash->erase = spi_flash_cmd_erase;
-
-       return flash;
+       return spi_flash_cmd_read(spi, &cmd, 1, response, len);
 }
 
-void spi_flash_free(struct spi_flash *flash)
+int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
+               const void *data, size_t data_len)
 {
-       spi_free_slave(flash->spi);
-       free(flash);
+       return spi_flash_read_write(spi, cmd, cmd_len, data, NULL, data_len);
 }