#define CMD_READ_ARRAY_SLOW 0x03
#define CMD_READ_ARRAY_FAST 0x0b
-#define CMD_READ_ARRAY_LEGACY 0xe8
+#define CMD_WRITE_STATUS 0x01
+#define CMD_PAGE_PROGRAM 0x02
+#define CMD_WRITE_DISABLE 0x04
#define CMD_READ_STATUS 0x05
#define CMD_WRITE_ENABLE 0x06
+#define CMD_ERASE_4K 0x20
+#define CMD_ERASE_32K 0x52
+#define CMD_ERASE_64K 0xd8
+#define CMD_ERASE_CHIP 0xc7
+
+/* Manufacture ID's */
+#define SPI_FLASH_SPANSION_IDCODE0 0x01
+#define SPI_FLASH_STMICRO_IDCODE0 0x20
+#define SPI_FLASH_WINBOND_IDCODE0 0xef
+
+/* Bank addr access commands */
+#define CMD_BANKADDR_BRWR 0x17
+#define CMD_BANKADDR_BRRD 0x16
+#define CMD_EXTNADDR_WREAR 0xC5
+#define CMD_EXTNADDR_RDEAR 0xC8
/* Common status */
#define STATUS_WIP 0x01
int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
const void *data, size_t data_len);
+/*
+ * Write the requested data out breaking it up into multiple write
+ * commands as needed per the write size.
+ */
+int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
+ size_t len, const void *buf);
+
+/*
+ * Enable writing on the SPI flash.
+ */
+static inline int spi_flash_cmd_write_enable(struct spi_flash *flash)
+{
+ return spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0);
+}
+
+/*
+ * Disable writing on the SPI flash.
+ */
+static inline int spi_flash_cmd_write_disable(struct spi_flash *flash)
+{
+ return spi_flash_cmd(flash->spi, CMD_WRITE_DISABLE, NULL, 0);
+}
+
+/* Program the status register. */
+int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr);
+
+/* Program the bank address register */
+int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel);
+
+/* Configure the BAR - discover the bank cmds */
+int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0);
+
/*
* Same as spi_flash_cmd_read() except it also claims/releases the SPI
* bus. Used as common part of the ->read() operation.
int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout);
/* Erase sectors. */
-int spi_flash_cmd_erase(struct spi_flash *flash, u8 erase_cmd,
- u32 erase_size, u32 offset, size_t len);
+int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len);
/* Manufacturer-specific probe functions */
struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode);