dm: mmc: Add an implementation of the 'devnum' functions

[u-boot] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 973258a80cf3daa0db10915d4548dea6f5fa31f5..91b7690972c9fab7eaa97102d20128a4513b1385 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -8,9 +8,36 @@ config DM_ETH
          This is currently implemented in net/eth.c
          Look in include/net.h for details.
 
+config PHYLIB
+       bool "Ethernet PHY (physical media interface) support"
+       help
+         Enable Ethernet PHY (physical media interface) support.
+
+config RTL8211X_PHY_FORCE_MASTER
+       bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode"
+       depends on PHYLIB
+       help
+         Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F).
+         This can work around link stability and data corruption issues on gigabit
+         links which can occur in slave mode on certain PHYs, e.g. on the
+         RTL8211C(L).
+
+         Please note that two directly connected devices (i.e. via crossover cable)
+         will not be able to establish a link between each other if they both force
+         master mode. Multiple devices forcing master mode when connected by a
+         network switch do not pose a problem as the switch configures its affected
+         ports into slave mode.
+
+         This option only affects gigabit links. If you must establish a direct
+         connection between two devices which both force master mode, try forcing
+         the link speed to 100MBit/s.
+
+         If unsure, say N.
+
 menuconfig NETDEVICES
        bool "Network device support"
        depends on NET
+       default y if DM_ETH
        help
          You must select Y to enable any network device support
          Generally if you have any networking support this is a given
@@ -19,6 +46,47 @@ menuconfig NETDEVICES
 
 if NETDEVICES
 
+config ALTERA_TSE
+       bool "Altera Triple-Speed Ethernet MAC support"
+       depends on DM_ETH
+       select PHYLIB
+       help
+         This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
+         Please find details on the "Triple-Speed Ethernet MegaCore Function
+         Resource Center" of Altera.
+
+config E1000
+       bool "Intel PRO/1000 Gigabit Ethernet support"
+       help
+         This driver supports Intel(R) PRO/1000 gigabit ethernet family of
+         adapters.  For more information on how to identify your adapter, go
+         to the Adapter & Driver ID Guide at:
+
+         <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+config E1000_SPI_GENERIC
+       bool "Allow access to the Intel 8257x SPI bus"
+       depends on E1000
+       help
+         Allow generic access to the SPI bus on the Intel 8257x, for
+         example with the "sspi" command.
+
+config E1000_SPI
+       bool "Enable SPI bus utility code"
+       depends on E1000
+       help
+         Utility code for direct access to the SPI bus on Intel 8257x.
+         This does not do anything useful unless you set at least one
+         of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
+
+config CMD_E1000
+       bool "Enable the e1000 command"
+       depends on E1000
+       help
+         This enables the 'e1000' management command for E1000 devices. When
+         used on devices with SPI support you can reprogram the EEPROM from
+         U-Boot.
+
 config ETH_SANDBOX
        depends on DM_ETH && SANDBOX
        default y
@@ -41,9 +109,69 @@ config ETH_SANDBOX_RAW
 
 config ETH_DESIGNWARE
        bool "Synopsys Designware Ethernet MAC"
+       select PHYLIB
        help
          This MAC is present in SoCs from various vendors. It supports
          100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
          provide the PHY (physical media interface).
 
+config MVPP2
+       bool "Marvell Armada 375 network interface support"
+       depends on ARMADA_375
+       select PHYLIB
+       help
+         This driver supports the network interface units in the
+         Marvell ARMADA 375 SoC.
+
+config PCH_GBE
+       bool "Intel Platform Controller Hub EG20T GMAC driver"
+       depends on DM_ETH && DM_PCI
+       select PHYLIB
+       help
+         This MAC is present in Intel Platform Controller Hub EG20T. It
+         supports 10/100/1000 Mbps operation.
+
+config RTL8139
+       bool "Realtek 8139 series Ethernet controller driver"
+       help
+         This driver supports Realtek 8139 series fast ethernet family of
+         PCI chipsets/adapters.
+
+config RTL8169
+       bool "Realtek 8169 series Ethernet controller driver"
+       help
+         This driver supports Realtek 8169 series gigabit ethernet family of
+         PCI/PCIe chipsets/adapters.
+
+config XILINX_AXIEMAC
+       depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+       select PHYLIB
+       select MII
+       bool "Xilinx AXI Ethernet"
+       help
+         This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
+
+config XILINX_EMACLITE
+       depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+       select PHYLIB
+       select MII
+       bool "Xilinx Ethernetlite"
+       help
+         This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
+
+config ZYNQ_GEM
+       depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
+       select PHYLIB
+       bool "Xilinx Ethernet GEM"
+       help
+         This MAC is present in Xilinx Zynq and ZynqMP SoCs.
+
+config PIC32_ETH
+       bool "Microchip PIC32 Ethernet Support"
+       depends on DM_ETH && MACH_PIC32
+       select PHYLIB
+       help
+         This driver implements 10/100 Mbps Ethernet and MAC layer for
+         Microchip PIC32 microcontrollers.
+
 endif # NETDEVICES