arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC

[u-boot] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 218e1fee22c3919d14ef6eda4aecf80b5a6a9b70..929b9e273ef8dceb7fd348653b143825c950a5e3 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -13,6 +13,27 @@ config PHYLIB
        help
          Enable Ethernet PHY (physical media interface) support.
 
+config RTL8211X_PHY_FORCE_MASTER
+       bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode"
+       depends on PHYLIB
+       help
+         Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F).
+         This can work around link stability and data corruption issues on gigabit
+         links which can occur in slave mode on certain PHYs, e.g. on the
+         RTL8211C(L).
+
+         Please note that two directly connected devices (i.e. via crossover cable)
+         will not be able to establish a link between each other if they both force
+         master mode. Multiple devices forcing master mode when connected by a
+         network switch do not pose a problem as the switch configures its affected
+         ports into slave mode.
+
+         This option only affects gigabit links. If you must establish a direct
+         connection between two devices which both force master mode, try forcing
+         the link speed to 100MBit/s.
+
+         If unsure, say N.
+
 menuconfig NETDEVICES
        bool "Network device support"
        depends on NET
@@ -25,6 +46,15 @@ menuconfig NETDEVICES
 
 if NETDEVICES
 
+config AG7XXX
+       bool "Atheros AG7xxx Ethernet MAC support"
+       depends on DM_ETH && ARCH_ATH79
+       select PHYLIB
+       help
+         This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
+         present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
+
+
 config ALTERA_TSE
        bool "Altera Triple-Speed Ethernet MAC support"
        depends on DM_ETH
@@ -34,6 +64,17 @@ config ALTERA_TSE
          Please find details on the "Triple-Speed Ethernet MegaCore Function
          Resource Center" of Altera.
 
+config DWC_ETH_QOS
+       bool "Synopsys DWC Ethernet QOS device support"
+       depends on DM_ETH
+       select PHYLIB
+       help
+         This driver supports the Synopsys Designware Ethernet QOS (Quality
+         Of Service) IP block. The IP supports many options for bus type,
+         clocking/reset structure, and feature list. This driver currently
+         supports the specific configuration used in NVIDIA's Tegra186 chip,
+         but should be extensible to other combinations quite easily.
+
 config E1000
        bool "Intel PRO/1000 Gigabit Ethernet support"
        help
@@ -94,6 +135,26 @@ config ETH_DESIGNWARE
          100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
          provide the PHY (physical media interface).
 
+config ETHOC
+       bool "OpenCores 10/100 Mbps Ethernet MAC"
+       help
+         This MAC is present in OpenRISC and Xtensa XTFPGA boards.
+
+config FEC_MXC
+       bool "FEC Ethernet controller"
+       depends on MX5 || MX6
+       help
+         This driver supports the 10/100 Fast Ethernet controller for
+         NXP i.MX processors.
+
+config MVPP2
+       bool "Marvell Armada 375 network interface support"
+       depends on ARMADA_375
+       select PHYLIB
+       help
+         This driver supports the network interface units in the
+         Marvell ARMADA 375 SoC.
+
 config PCH_GBE
        bool "Intel Platform Controller Hub EG20T GMAC driver"
        depends on DM_ETH && DM_PCI
@@ -102,6 +163,27 @@ config PCH_GBE
          This MAC is present in Intel Platform Controller Hub EG20T. It
          supports 10/100/1000 Mbps operation.
 
+config RTL8139
+       bool "Realtek 8139 series Ethernet controller driver"
+       help
+         This driver supports Realtek 8139 series fast ethernet family of
+         PCI chipsets/adapters.
+
+config RTL8169
+       bool "Realtek 8169 series Ethernet controller driver"
+       help
+         This driver supports Realtek 8169 series gigabit ethernet family of
+         PCI/PCIe chipsets/adapters.
+
+config SUN8I_EMAC
+        bool "Allwinner Sun8i Ethernet MAC support"
+        depends on DM_ETH
+        select PHYLIB
+        help
+          This driver supports the  Allwinner based SUN8I/SUN50I Ethernet MAC.
+         It can be found in H3/A64/A83T based SoCs and compatible with both
+         External and Internal PHY's.
+
 config XILINX_AXIEMAC
        depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
        select PHYLIB
@@ -111,7 +193,7 @@ config XILINX_AXIEMAC
          This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
 
 config XILINX_EMACLITE
-       depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+       depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
        select PHYLIB
        select MII
        bool "Xilinx Ethernetlite"
@@ -125,4 +207,12 @@ config ZYNQ_GEM
        help
          This MAC is present in Xilinx Zynq and ZynqMP SoCs.
 
+config PIC32_ETH
+       bool "Microchip PIC32 Ethernet Support"
+       depends on DM_ETH && MACH_PIC32
+       select PHYLIB
+       help
+         This driver implements 10/100 Mbps Ethernet and MAC layer for
+         Microchip PIC32 microcontrollers.
+
 endif # NETDEVICES