stm32f1: remove stm32f1 support

[u-boot] / drivers / net / designware.c

diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index a8e2a92def8c510e08d5f5b4c87e941637f6a1a5..521e4dde41f8dfecee0eea4646fe9824546c456b 100644 (file)
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -18,6 +18,7 @@
 #include <linux/compiler.h>
 #include <linux/err.h>
 #include <asm/io.h>
+#include <power/regulator.h>
 #include "designware.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -661,6 +662,22 @@ int designware_eth_probe(struct udevice *dev)
        ulong ioaddr;
        int ret;
 
+#if defined(CONFIG_DM_REGULATOR)
+       struct udevice *phy_supply;
+
+       ret = device_get_supply_regulator(dev, "phy-supply",
+                                         &phy_supply);
+       if (ret) {
+               debug("%s: No phy supply\n", dev->name);
+       } else {
+               ret = regulator_set_enable(phy_supply, true);
+               if (ret) {
+                       puts("Error enabling phy supply\n");
+                       return ret;
+               }
+       }
+#endif
+
 #ifdef CONFIG_DM_PCI
        /*
         * If we are on PCI bus, either directly attached to a PCI root port,
@@ -726,9 +743,10 @@ int designware_eth_ofdata_to_platdata(struct udevice *dev)
 #endif
        int ret = 0;
 
-       pdata->iobase = dev_get_addr(dev);
+       pdata->iobase = devfdt_get_addr(dev);
        pdata->phy_interface = -1;
-       phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
+       phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
+                              NULL);
        if (phy_mode)
                pdata->phy_interface = phy_get_interface_by_name(phy_mode);
        if (pdata->phy_interface == -1) {
@@ -737,20 +755,19 @@ int designware_eth_ofdata_to_platdata(struct udevice *dev)
        }
 
        pdata->max_speed = 0;
-       cell = fdt_getprop(gd->fdt_blob, dev->of_offset, "max-speed", NULL);
+       cell = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "max-speed", NULL);
        if (cell)
                pdata->max_speed = fdt32_to_cpu(*cell);
 
 #ifdef CONFIG_DM_GPIO
-       if (fdtdec_get_bool(gd->fdt_blob, dev->of_offset,
-                           "snps,reset-active-low"))
+       if (dev_read_bool(dev, "snps,reset-active-low"))
                reset_flags |= GPIOD_ACTIVE_LOW;
 
        ret = gpio_request_by_name(dev, "snps,reset-gpio", 0,
                &priv->reset_gpio, reset_flags);
        if (ret == 0) {
-               ret = fdtdec_get_int_array(gd->fdt_blob, dev->of_offset,
-                       "snps,reset-delays-us", dw_pdata->reset_delays, 3);
+               ret = dev_read_u32_array(dev, "snps,reset-delays-us",
+                                        dw_pdata->reset_delays, 3);
        } else if (ret == -ENOENT) {
                ret = 0;
        }