rockchip: add early uart driver

[u-boot] / drivers / net / designware.c

diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index ae78d21db6d95a5d2b63552d7ef7d9d1d3fb7937..a6c39c39ffaaee82f40f31dbf6c9ada59b3ce745 100644 (file)
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -14,6 +14,7 @@
 #include <errno.h>
 #include <miiphy.h>
 #include <malloc.h>
+#include <pci.h>
 #include <linux/compiler.h>
 #include <linux/err.h>
 #include <asm/io.h>
@@ -558,6 +559,22 @@ static int designware_eth_write_hwaddr(struct udevice *dev)
        return _dw_write_hwaddr(priv, pdata->enetaddr);
 }
 
+static int designware_eth_bind(struct udevice *dev)
+{
+#ifdef CONFIG_DM_PCI
+       static int num_cards;
+       char name[20];
+
+       /* Create a unique device name for PCI type devices */
+       if (device_is_on_pci_bus(dev)) {
+               sprintf(name, "eth_designware#%u", num_cards++);
+               device_set_name(dev, name);
+       }
+#endif
+
+       return 0;
+}
+
 static int designware_eth_probe(struct udevice *dev)
 {
        struct eth_pdata *pdata = dev_get_platdata(dev);
@@ -565,6 +582,23 @@ static int designware_eth_probe(struct udevice *dev)
        u32 iobase = pdata->iobase;
        int ret;
 
+#ifdef CONFIG_DM_PCI
+       /*
+        * If we are on PCI bus, either directly attached to a PCI root port,
+        * or via a PCI bridge, fill in platdata before we probe the hardware.
+        */
+       if (device_is_on_pci_bus(dev)) {
+               pci_dev_t bdf = pci_get_bdf(dev);
+
+               dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0, &iobase);
+               iobase &= PCI_BASE_ADDRESS_MEM_MASK;
+               iobase = pci_mem_to_phys(bdf, iobase);
+
+               pdata->iobase = iobase;
+               pdata->phy_interface = PHY_INTERFACE_MODE_RMII;
+       }
+#endif
+
        debug("%s, iobase=%x, priv=%p\n", __func__, iobase, priv);
        priv->mac_regs_p = (struct eth_mac_regs *)iobase;
        priv->dma_regs_p = (struct eth_dma_regs *)(iobase + DW_DMA_BASE_OFFSET);
@@ -579,6 +613,17 @@ static int designware_eth_probe(struct udevice *dev)
        return ret;
 }
 
+static int designware_eth_remove(struct udevice *dev)
+{
+       struct dw_eth_dev *priv = dev_get_priv(dev);
+
+       free(priv->phydev);
+       mdio_unregister(priv->bus);
+       mdio_free(priv->bus);
+
+       return 0;
+}
+
 static const struct eth_ops designware_eth_ops = {
        .start                  = designware_eth_start,
        .send                   = designware_eth_send,
@@ -617,10 +662,19 @@ U_BOOT_DRIVER(eth_designware) = {
        .id     = UCLASS_ETH,
        .of_match = designware_eth_ids,
        .ofdata_to_platdata = designware_eth_ofdata_to_platdata,
+       .bind   = designware_eth_bind,
        .probe  = designware_eth_probe,
+       .remove = designware_eth_remove,
        .ops    = &designware_eth_ops,
        .priv_auto_alloc_size = sizeof(struct dw_eth_dev),
        .platdata_auto_alloc_size = sizeof(struct eth_pdata),
        .flags = DM_FLAG_ALLOC_PRIV_DMA,
 };
+
+static struct pci_device_id supported[] = {
+       { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_EMAC) },
+       { }
+};
+
+U_BOOT_PCI_DEVICE(eth_designware, supported);
 #endif