#if (CONFIG_SYS_NUM_FM1_DTSEC >= 5)
FM_DTSEC_INFO_INITIALIZER(1, 5),
#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 6)
+ FM_DTSEC_INFO_INITIALIZER(1, 6),
+#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 7)
+ FM_DTSEC_INFO_INITIALIZER(1, 9),
+#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 8)
+ FM_DTSEC_INFO_INITIALIZER(1, 10),
+#endif
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 1)
FM_DTSEC_INFO_INITIALIZER(2, 1),
#endif
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 5)
FM_DTSEC_INFO_INITIALIZER(2, 5),
#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 6)
+ FM_DTSEC_INFO_INITIALIZER(2, 6),
+#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 7)
+ FM_DTSEC_INFO_INITIALIZER(2, 9),
+#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 8)
+ FM_DTSEC_INFO_INITIALIZER(2, 10),
+#endif
#if (CONFIG_SYS_NUM_FM1_10GEC >= 1)
FM_TGEC_INFO_INITIALIZER(1, 1),
#endif
+#if (CONFIG_SYS_NUM_FM1_10GEC >= 2)
+ FM_TGEC_INFO_INITIALIZER(1, 2),
+#endif
#if (CONFIG_SYS_NUM_FM2_10GEC >= 1)
FM_TGEC_INFO_INITIALIZER(2, 1),
#endif
+#if (CONFIG_SYS_NUM_FM2_10GEC >= 2)
+ FM_TGEC_INFO_INITIALIZER(2, 2),
+#endif
};
int fm_standard_init(bd_t *bis)
static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
{
- int off, ph;
+ int off;
+ uint32_t ph;
phys_addr_t paddr = CONFIG_SYS_CCSRBAR_PHYS + info->compat_offset;
u64 dtsec1_addr = (u64)CONFIG_SYS_CCSRBAR_PHYS +
CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET;
return ;
}
+#ifdef CONFIG_SYS_FMAN_V3
+ /*
+ * Physically FM1_DTSEC9 and FM1_10GEC1 use the same dual-role MAC, when
+ * FM1_10GEC1 is enabled and FM1_DTSEC9 is disabled, ensure that the
+ * dual-role MAC is not disabled, ditto for other dual-role MACs.
+ */
+ if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) ||
+ ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
+ ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) ||
+ ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10)))
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ ||
+ ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1))) ||
+ ((info->port == FM2_DTSEC10) && (PORT_IS_ENABLED(FM2_10GEC2))) ||
+ ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9))) ||
+ ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10)))
+#endif
+ )
+ return;
+#endif
/* board code might have caused offset to change */
off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
/* Don't disable FM1-DTSEC1 MAC as its used for MDIO */
- if (paddr != dtsec1_addr) {
- /* disable the mac node */
- fdt_setprop_string(blob, off, "status", "disabled");
- }
+ if (paddr != dtsec1_addr)
+ fdt_status_disabled(blob, off); /* disable the MAC node */
- /* disable the node point to the mac */
+ /* disable the fsl,dpa-ethernet node that points to the MAC */
ph = fdt_get_phandle(blob, off);
do_fixup_by_prop(blob, "fsl,fman-mac", &ph, sizeof(ph),
"status", "disabled", strlen("disabled") + 1, 1);
{
int i;
+#ifdef CONFIG_SYS_FMAN_V3
+ for (i = 0; i < ARRAY_SIZE(fm_info); i++)
+ ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac");
+#else
for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
if (fm_info[i].type == FM_ETH_1G_E)
ft_fixup_port(blob, &fm_info[i], "fsl,fman-1g-mac");
else
ft_fixup_port(blob, &fm_info[i], "fsl,fman-10g-mac");
}
+#endif
}