eth->phydev = phydev;
- /* 10BASE is not supported for Ethernet AVB MAC */
- phydev->supported &= ~(SUPPORTED_10baseT_Full
- | SUPPORTED_10baseT_Half);
+ phydev->supported &= SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
+ SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause;
+
if (pdata->max_speed != 1000) {
- phydev->supported &= ~(SUPPORTED_1000baseT_Half
- | SUPPORTED_1000baseT_Full);
+ phydev->supported &= ~SUPPORTED_1000baseT_Full;
reg = phy_read(phydev, -1, MII_CTRL1000);
reg &= ~(BIT(9) | BIT(8));
phy_write(phydev, -1, MII_CTRL1000, reg);
ret = ravb_reset(dev);
if (ret)
- goto err;
+ return ret;
ravb_base_desc_init(eth);
ravb_tx_desc_init(eth);
ret = ravb_config(dev);
if (ret)
- goto err;
+ return ret;
/* Setting the control will start the AVB-DMAC process. */
writel(CCC_OPC_OPERATION, eth->iobase + RAVB_REG_CCC);
return 0;
-
-err:
- clk_disable(ð->clk);
- return ret;
}
static void ravb_stop(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_platdata(dev);
struct ravb_priv *eth = dev_get_priv(dev);
+ struct ofnode_phandle_args phandle_args;
struct mii_dev *mdiodev;
void __iomem *iobase;
int ret;
if (ret < 0)
goto err_mdio_alloc;
- gpio_request_by_name(dev, "reset-gpios", 0, ð->reset_gpio,
- GPIOD_IS_OUT);
+ ret = dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0, &phandle_args);
+ if (!ret) {
+ gpio_request_by_name_nodev(phandle_args.node, "reset-gpios", 0,
+ ð->reset_gpio, GPIOD_IS_OUT);
+ }
+
+ if (!dm_gpio_is_valid(ð->reset_gpio)) {
+ gpio_request_by_name(dev, "reset-gpios", 0, ð->reset_gpio,
+ GPIOD_IS_OUT);
+ }
mdiodev = mdio_alloc();
if (!mdiodev) {
{ .compatible = "renesas,etheravb-r8a7796" },
{ .compatible = "renesas,etheravb-r8a77965" },
{ .compatible = "renesas,etheravb-r8a77970" },
+ { .compatible = "renesas,etheravb-r8a77990" },
{ .compatible = "renesas,etheravb-r8a77995" },
{ .compatible = "renesas,etheravb-rcar-gen3" },
{ }